The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Porous electrospun polycaprolactone (PCL) fibres by phase separation
Open accessAbstract
Porous electrospun poly(ε-caprolactone) (PCL) fibres were produced through a non-solvent induced phase separation mechanism, using binary solvent systems with different properties. The effect of the solvent properties on the size and surface morphology of electrospun PCL fibres was investigated. Chloroform (CF), dichloromethane (DCM), tetrahydrofuran (THF) and formic acid (FA) were used as good solvents in mixtures with a poor solvent, dimethyl sulfoxide (DMSO), in order to generate pores on the fibre surface. The production of porous, bead free fibres with an average diameter ranging from 1470 to 2270 nm was achieved using 12.5% w/v PCL in CF/DMSO solution with good/poor solvent ratios varying from 75% to 90% v/v at the applied voltage of 15 kV, a spinning distance of 20 cm, and the feed flow rate of 1 ml/h. DCM and THF were proven to be less suitable good solvents for the process due to the formation of a solid skin on the jet surface, caused by the limited diffusivity of the polymer molecules from the jet surface to the liquid core and its subsequent collapse. FA was found to be unsuitable due to its similar evaporation rate to DMSO. The pore formation was favoured at high good/poor solvent ratios, whereas, the production of fibres with ribbon cross sections or fibres with beads was more pronounced at low good/poor solvent ratios. Data fitting was used for the development of a second order polynomial equation, correlating the produced fibre average diameter to the solution parameters (conductivity, surface tension, and viscosity), for the given polymer and solvent systems, under the specific experimental conditions used in this study. The ternary mixture compositions that lead to the formation of porous fibres were mapped on a ternary graph.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Electrospinning process and applications of electrospun fibers
Doshi, J., & Reneker, D. H. (1995) · Journal of Electrostatics · doi:10.1016/0304-3886(95)00041-8 · Cited by 3,209
Guillen, G. R., Pan, Y., Li, M., & Hoek, E. M. V. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie101928r · Cited by 1,521
Micro- and Nanostructured Surface Morphology on Electrospun Polymer Fibers
Megelski, S., Stephens, J. S., Chase, D. B., & Rabolt, J. F. (2002) · Macromolecules · doi:10.1021/ma020444a · Cited by 1,323
Casper, C. L., Stephens, J. S., Tassi, N. G., Chase, D. B., & Rabolt, J. F. (2004) · Macromolecules · doi:10.1021/ma0351975 · Cited by 1,006
Three-Dimensionally Ordered Array of Air Bubbles in a Polymer Film
Srinivasarao, M., Collings, D., Philips, A., & Patel, S. (2001) · Science · doi:10.1126/science.1057887 · Cited by 907
Flat polymer ribbons and other shapes by electrospinning
Koombhongse, S., Liu, W., & Reneker, D. H. (2001) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10015 · Cited by 824
Effects of Humidity and Solution Viscosity on Electrospun Fiber Morphology
Nezarati, R. M., Eifert, M. B., & Cosgriff-Hernandez, E. (2013) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2012.0671 · Cited by 459
Nano-Featured Scaffolds for Tissue Engineering: A Review of Spinning Methodologies
Murugan, R., & Ramakrishna, S. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.435 · Cited by 387
Casasola, R., Thomas, N. L., Trybala, A., & Georgiadou, S. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.032 · Cited by 382
Self-citation
Cited by
Electrospinning for tissue engineering applications
Rahmati, M., Mills, D. K., Urbanska, A. M., Saeb, M. R., Venugopal, J. R., Ramakrishna, S., & Mozafari, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100721 · Cited by 816
Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, S., Qin, S., He, M., Zhou, D., Qin, Q., & Wang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108238 · Cited by 533
Antioxidant, antibacterial and antifungal electrospun nanofibers for food packaging applications
Topuz, F., & Uyar, T. (2020) · Food Research International · doi:10.1016/j.foodres.2019.108927 · Cited by 336
Recent Progress of the Preparation and Application of Electrospun Porous Nanofibers
Wang, P., Lv, H., Cao, X., Liu, Y., & Yu, D.-G. (2023) · Polymers · doi:10.3390/polym15040921 · Cited by 140
Metadata
- Authors
- Katsogiannis, K. A. G., Vladisavljević, G. T., & Georgiadou, S.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2015-08
- Volume
- 69
- Pages
- 284-295
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W1990494004
- Cited by
- 266
- References
- 25
- FWCI
- 6.64
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Porous electrospun polycaprolactone (PCL) fibres by phase separation. https://app.cochat.ai/papers/10.1016/j.eurpolymj.2015.01.028
- The paper
- Katsogiannis, K. A. G., Vladisavljević, G. T., & Georgiadou, S. (2015). Porous electrospun polycaprolactone (PCL) fibres by phase separation. European Polymer Journal. https://doi.org/10.1016/j.eurpolymj.2015.01.028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.