The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Roll‐to‐Roll fabrication of large area functional organic materials
Abstract
With the prospect of extremely fast manufacture of very low cost devices, organic electronics prepared by thin film processing techniques that are compatible with roll‐to‐roll (R2R) methods are presently receiving an increasing interest. Several technologies using organic thin films are at the point, where transfer from the laboratory to a more production‐oriented environment is within reach. In this review, we aim at giving an overview of some of the R2R‐compatible techniques that can be used in such a transfer, as well the current status of R2R application within some of the existing research fields such as organic photovoltaics, organic thin film transistors, light‐emitting diodes, polymer electrolyte membrane fuel cells, and electrochromic devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationRoll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Self-citationKrebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Self-citationProgress with Light-Emitting Polymers
Bernius, M. T., Inbasekaran, M., O’Brien, J., & Wu, W. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1737::aid-adma1737>3.0.co;2-n · Cited by 1,162
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Self-citationKrebs, F. C., Jørgensen, M., Norrman, K., Hagemann, O., Alstrup, J., Nielsen, T. D., Fyenbo, J., Larsen, K., & Kristensen, J. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.001 · Cited by 808
Self-citationKrebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.012 · Cited by 780
Self-citationKrebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
Self-citationHigh Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Hoth, C. N., Choulis, S. A., Schilinsky, P., & Brabec, C. J. (2007) · Advanced Materials · doi:10.1002/adma.200700911 · Cited by 513
Cited by
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Wadsworth, A., Moser, M., Marks, A., Little, M. S., Gasparini, N., Brabec, C. J., Baran, D., & McCulloch, I. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00892a · Cited by 986
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
High-k Gate Dielectrics for Emerging Flexible and Stretchable Electronics
Wang, B., Huang, W., Chi, L., Al-Hashimi, M., Marks, T. J., & Facchetti, A. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00045 · Cited by 818
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
Krebs, F. C., Espinosa, N., Hösel, M., Søndergaard, R. R., & Jørgensen, M. (2014) · Advanced Materials · doi:10.1002/adma.201302031 · Cited by 793
Self-citationEfficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
Barrows, A. T., Pearson, A. J., Kwak, C. K., Dunbar, A. D. F., Buckley, A. R., & Lidzey, D. G. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01546k · Cited by 765
Morphology control strategies for solution-processed organic semiconductor thin films
Diao, Y., Shaw, L., Bao, Z., & Mannsfeld, S. C. B. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00688g · Cited by 670
Polymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Toward Printed Integrated Circuits based on Unipolar or Ambipolar Polymer Semiconductors
Baeg, K., Caironi, M., & Noh, Y. (2013) · Advanced Materials · doi:10.1002/adma.201205361 · Cited by 522
The role of the third component in ternary organic solar cells
Gasparini, N., Salleo, A., McCulloch, I., & Baran, D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0093-4 · Cited by 494
Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
Kang, H., Kim, G., Kim, J., Kwon, S., Kim, H., & Lee, K. (2016) · Advanced Materials · doi:10.1002/adma.201601197 · Cited by 489
Impact of the Doping Method on Conductivity and Thermopower in Semiconducting Polythiophenes
Glaudell, A. M., Cochran, J. E., Patel, S. N., & Chabinyc, M. L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401072 · Cited by 423
Flexible temperature sensors: A review
Arman Kuzubasoglu, B., & Kursun Bahadir, S. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112282 · Cited by 369
Liu, Q., Bottle, S. E., & Sonar, P. (2020) · Advanced Materials · doi:10.1002/adma.201903882 · Cited by 363
Ultrathin Metal films for Transparent Electrodes of Flexible Optoelectronic Devices
Yun, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606641 · Cited by 350
A guide for the characterization of organic electrochemical transistors and channel materials
Ohayon, D., Druet, V., & Inal, S. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00920j · Cited by 350
Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics
He, P., Cao, J., Ding, H., Liu, C., Neilson, J., Li, Z., Kinloch, I. A., & Derby, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04589 · Cited by 340
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Secor, E. B., Ahn, B. Y., Gao, T. Z., Lewis, J. A., & Hersam, M. C. (2015) · Advanced Materials · doi:10.1002/adma.201502866 · Cited by 334
Bucella, S. G., Luzio, A., Gann, E., Thomsen, L., McNeill, C. R., Pace, G., Perinot, A., Chen, Z., Facchetti, A., & Caironi, M. (2015) · Nature Communications · doi:10.1038/ncomms9394 · Cited by 324
ZnO cathode buffer layers for inverted polymer solar cells
Liang, Z., Zhang, Q., Jiang, L., & Cao, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02510a · Cited by 317
Chemical formation of soft metal electrodes for flexible and wearable electronics
Wang, D., Zhang, Y., Lu, X., Ma, Z., Xie, C., & Zheng, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00192d · Cited by 307
A review of the operating limits in slot die coating processes
Ding, X., Liu, J., & Harris, T. A. L. (2016) · AIChE Journal · doi:10.1002/aic.15268 · Cited by 294
Biodegradable electronics: cornerstone for sustainable electronics and transient applications
Tan, M. J., Owh, C., Chee, P. L., Kyaw, A. K. K., Kai, D., & Loh, X. J. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc00678g · Cited by 288
Wünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
High efficiency, fully inkjet printed organic solar cells with freedom of design
Eggenhuisen, T. M., Galagan, Y., Biezemans, A. F. K. V., Slaats, T. M. W. L., Voorthuijzen, W. P., Kommeren, S., Shanmugam, S., Teunissen, J. P., Hadipour, A., Verhees, W. J. H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00540j · Cited by 275
3D Printer Based Slot‐Die Coater as a Lab‐to‐Fab Translation Tool for Solution‐Processed Solar Cells
Vak, D., Hwang, K., Faulks, A., Jung, Y., Clark, N., Kim, D., Wilson, G. J., & Watkins, S. E. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401539 · Cited by 265
A review on flexible gas sensors: From materials to devices
Alrammouz, R., Podlecki, J., Abboud, P., Sorli, B., & Habchi, R. (2018) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2018.10.036 · Cited by 255
Flow-enhanced solution printing of all-polymer solar cells
Diao, Y., Zhou, Y., Kurosawa, T., Shaw, L., Wang, C., Park, S., Guo, Y., Reinspach, J. A., Gu, K., Gu, X., et al. (2015) · Nature Communications · doi:10.1038/ncomms8955 · Cited by 254
Metadata
- Authors
- Søndergaard, R. R., Hösel, M., & Krebs, F. C.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2012-10-19
- Volume
- 51
- Issue
- 1
- Pages
- 16-34
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W1978487466
- Cited by
- 1,065
- References
- 46
- FWCI
- 61.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.