The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Roll‐to‐Roll fabrication of large area functional organic materials
Abstract
With the prospect of extremely fast manufacture of very low cost devices, organic electronics prepared by thin film processing techniques that are compatible with roll‐to‐roll (R2R) methods are presently receiving an increasing interest. Several technologies using organic thin films are at the point, where transfer from the laboratory to a more production‐oriented environment is within reach. In this review, we aim at giving an overview of some of the R2R‐compatible techniques that can be used in such a transfer, as well the current status of R2R application within some of the existing research fields such as organic photovoltaics, organic thin film transistors, light‐emitting diodes, polymer electrolyte membrane fuel cells, and electrochromic devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationRoll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Self-citationKrebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Self-citationProgress with Light-Emitting Polymers
Bernius, M. T., Inbasekaran, M., O’Brien, J., & Wu, W. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1737::aid-adma1737>3.0.co;2-n · Cited by 1,162
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Self-citationKrebs, F. C., Jørgensen, M., Norrman, K., Hagemann, O., Alstrup, J., Nielsen, T. D., Fyenbo, J., Larsen, K., & Kristensen, J. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.001 · Cited by 808
Self-citationKrebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.012 · Cited by 780
Self-citationKrebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
Self-citationHigh Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Hoth, C. N., Choulis, S. A., Schilinsky, P., & Brabec, C. J. (2007) · Advanced Materials · doi:10.1002/adma.200700911 · Cited by 513
Krebs, F. C., Nielsen, T. D., Fyenbo, J., Wadstrøm, M., & Pedersen, M. S. (2010) · Energy & Environmental Science · doi:10.1039/b918441d · Cited by 483
Self-citationAmbient fabrication of flexible and large-area organic light-emitting devices using slot-die coating
Sandström, A., Dam, H. F., Krebs, F. C., & Edman, L. (2012) · Nature Communications · doi:10.1038/ncomms2002 · Cited by 451
Self-citationProgress and perspective of polymer white light-emitting devices and materials
Wu, H., Ying, L., Yang, W., & Cao, Y. (2009) · Chemical Society Reviews · doi:10.1039/b816352a · Cited by 432
Printing Highly Efficient Organic Solar Cells
Hoth, C. N., Schilinsky, P., Choulis, S. A., & Brabec, C. J. (2008) · Nano Letters · doi:10.1021/nl801365k · Cited by 414
Printable All‐Organic Electrochromic Active‐Matrix Displays
Andersson, P., Forchheimer, R., Tehrani, P., & Berggren, M. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601241 · Cited by 382
Application of Screen Printing in the Fabrication of Organic Light-Emitting Devices
Pardo, D. A., Jabbour, G. E., & Peyghambarian, N. (2000) · Advanced Materials · doi:10.1002/1521-4095(200009)12:17<1249::aid-adma1249>3.0.co;2-y · Cited by 372
Polymer based organic solar cells using ink-jet printed active layers
Aernouts, T., Aleksandrov, T., Girotto, C., Genoe, J., & Poortmans, J. (2008) · Applied Physics Letters · doi:10.1063/1.2833185 · Cited by 292
Recent Advances in Conjugated Polymers for Light Emitting Devices
AlSalhi, M. S., Alam, J., Dass, L. A., & Raja, M. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12032036 · Cited by 273
Wen, Y., Liu, Y., Guo, Y., Yu, G., & Hu, W. (2011) · Chemical Reviews · doi:10.1021/cr1001904 · Cited by 258
Polymer solar cells based on inkjet-printed PEDOT:PSS layer
Eom, S. H., Senthilarasu, S., Uthirakumar, P., Yoon, S. C., Lim, J., Lee, C., Lim, H. S., Lee, J., & Lee, S.-H. (2009) · Organic Electronics · doi:10.1016/j.orgel.2009.01.015 · Cited by 253
Manceau, M., Angmo, D., Jørgensen, M., & Krebs, F. C. (2011) · Organic Electronics · doi:10.1016/j.orgel.2011.01.009 · Cited by 235
Self-citationHigh‐Performance Organic Solar Cells with Spray‐Coated Hole‐Transport and Active Layers
Girotto, C., Moia, D., Rand, B. P., & Heremans, P. L. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001562 · Cited by 218
Girotto, C., Rand, B. P., Genoe, J., & Heremans, P. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.11.052 · Cited by 216
Printed Paper Photovoltaic Cells
Hübler, A., Trnovec, B., Zillger, T., Ali, M., Wetzold, N., Mingebach, M., Wagenpfahl, A., Deibel, C., & Dyakonov, V. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100394 · Cited by 215
A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules
Krebs, F. C., Gevorgyan, S. A., Gholamkhass, B., Holdcroft, S., Schlenker, C., Thompson, M. E., Thompson, B. C., Olson, D., Ginley, D. S., Shaheen, S. E., et al. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.07.015 · Cited by 212
Self-citationAlstrup, J., Jørgensen, M., Medford, A. J., & Krebs, F. C. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100505e · Cited by 201
Self-citationThe OE-A OPV demonstrator anno domini 2011
Krebs, F. C., Fyenbo, J., Tanenbaum, D. M., Gevorgyan, S. A., Andriessen, R., van Remoortere, B., Galagan, Y., & Jørgensen, M. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01891d · Cited by 189
Self-citationPolymer solar cells based on inkjet-printed PEDOT:PSS layer
이수형, 이연식, 엄승훈, & 박한옥 (2009) · 한국에너지학회 학술발표회 · Cited by 189
All-Inkjet-Printed Organic Thin-Film Transistor Inverter on Flexible Plastic Substrate
Chung, S., Kim, S. O., Kwon, S.-K., Lee, C., & Hong, Y. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2156757 · Cited by 187
Beaujuge, P. M., Ellinger, S., & Reynolds, J. R. (2008) · Advanced Materials · doi:10.1002/adma.200800280 · Cited by 186
Technology development for roll-to-roll production of organic photovoltaics
Galagan, Y., de Vries, I. G., Langen, A. P., Andriessen, R., Verhees, W. J. H., Veenstra, S. C., & Kroon, J. M. (2011) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2010.07.012 · Cited by 170
Eom, S. H., Park, H., Mujawar, S. H., Yoon, S. C., Kim, S.-S., Na, S.-I., Kang, S.-J., Khim, D., Kim, D.-Y., & Lee, S.-H. (2010) · Organic Electronics · doi:10.1016/j.orgel.2010.06.007 · Cited by 162
Gravure printed flexible organic photovoltaic modules
Kopola, P., Aernouts, T., Sliz, R., Guillerez, S., Ylikunnari, M., Cheyns, D., Välimäki, M. K., Tuomikoski, M., Hast, J. T., Jabbour, G. E., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.12.020 · Cited by 160
Blankenburg, L., Schultheis, K., Schache, H., Sensfuss, S., & Schrödner, M. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.013 · Cited by 160
Voigt, M. M., Guite, A., Chung, D., Khan, R. U. A., Campbell, A. J., Bradley, D. D. C., Meng, F., Steinke, J. H. G., Tierney, S., McCulloch, I. A., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901597 · Cited by 136
Zimmermann, B., Schleiermacher, H., Niggemann, M., & Würfel, U. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.11.025 · Cited by 124
Fully gravure and ink-jet printed high speed pBTTT organic thin film transistors
Vornbrock, A. D. L. F., Sung, D., Kang, H., et al. (2010) · Organic Electronics · doi:10.1016/j.orgel.2010.09.003 · Cited by 110
Jensen, J. R., Dam, H. F., Reynolds, J. R., Dyer, A. L., & Krebs, F. C. (2012) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23038 · Cited by 106
Self-citationLarsen‐Olsen, T. T., Andreasen, B., Andersen, T. R., Böttiger, A. P. L., Bundgaard, E., Norrman, K., Andreasen, J. W., Jørgensen, M., & Krebs, F. C. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.026 · Cited by 105
Self-citationPatternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing
Ding, J. M., Vornbrock, A. D. L. F., Ting, C., & Subramanian, V. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.003 · Cited by 104
Complementary Ring Oscillator Exclusively Prepared by Means of Gravure and Flexographic Printing
Kempa, H., Hambsch, M., Reuter, K., Stanel, M., Schmidt, G. C., Meier, B., & Hübler, A. C. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2153856 · Cited by 87
Small, W. R., Masdarolomoor, F., Wallace, G. G., & Panhuis, M. I. H. (2007) · Journal of Materials Chemistry · doi:10.1039/b712940h · Cited by 84
Roll-to-roll coated PBI membranes for high temperature PEM fuel cells
Steenberg, T., Hjuler, H. A., Terkelsen, C., Sánchez, M. T. R., Cleemann, L. N., & Krebs, F. C. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02936g · Cited by 77
Self-citationLange, A., Wegener, M., Boeffel, C., Fischer, B., Wedel, A., & Neher, D. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.05.054 · Cited by 70
Design of roll-to-roll printing equipment with multiple printing methods for multi-layer printing
Kim, C.-H., Jo, J., & Lee, S. (2012) · Review of Scientific Instruments · doi:10.1063/1.4726018 · Cited by 54
Amb, C. M., Craig, M. R., Koldemir, Ü., Subbiah, J., Choudhury, K. R., Gevorgyan, S. A., Jørgensen, M., Krebs, F. C., So, F. F., & Reynolds, J. R. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300156p · Cited by 54
Self-citation
Cited by
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Wadsworth, A., Moser, M., Marks, A., Little, M. S., Gasparini, N., Brabec, C. J., Baran, D., & McCulloch, I. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00892a · Cited by 986
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
High-k Gate Dielectrics for Emerging Flexible and Stretchable Electronics
Wang, B., Huang, W., Chi, L., Al-Hashimi, M., Marks, T. J., & Facchetti, A. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00045 · Cited by 818
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
Krebs, F. C., Espinosa, N., Hösel, M., Søndergaard, R. R., & Jørgensen, M. (2014) · Advanced Materials · doi:10.1002/adma.201302031 · Cited by 793
Self-citation
Metadata
- Authors
- Søndergaard, R. R., Hösel, M., & Krebs, F. C.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2012-10-19
- Volume
- 51
- Issue
- 1
- Pages
- 16-34
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W1978487466
- Cited by
- 1,065
- References
- 46
- FWCI
- 61.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.