The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Cold, warm, and hot programming of shape memory polymers
Open accessAbstract
In this article, programming is classified as hot, warm, and cold, based on the temperature zone within which the programming is conducted. The strain and stress locking and releasing mechanisms are discussed within the thermodynamics framework. A new formula is developed for quantifying the strain recovery ratio of cold‐programmed SMPs. Stress fixity ratio and stress recovery ratio are also defined based on the understanding of stress locking and recovery mechanisms. State‐of‐the‐art literature on warm and cold programming is reviewed. Well‐controlled programming as well as free strain recovery test and constrained stress recovery test are conducted, in order to validate the memory mechanisms discussed in this study. It is found that, while programming temperature has an insignificant effect on the final free shape recovery, it has a significant effect on the stress recovery. The recovery stress programmed by cold programming may be lower, equal to, or higher than that by hot programming, due to the different stress locking mechanisms and other factors such as damage during the thermomechanical cycle.Cold, Warm, and Hot Programming of Shape Memory Polymers© 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys.2016,54, 1319–1339
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Hu, J., Zhu, Y., Huang, H., & Lu, J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.001 · Cited by 1,279
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Self-citationRecent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Mather, P. T., Luo, X., & Rousseau, I. A. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145419 · Cited by 911
Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0600079103 · Cited by 819
Liquid crystal elastomers with mechanical properties of a muscle
Thomsen, D. L., Keller, P., Naciri, J., Pink, R., Jeon, H., Shenoy, D., & Ratna, B. R. (2001) · Macromolecules · doi:10.1021/ma001639q · Cited by 689
Reversible bidirectional shape-memory polymers
Behl, M., Kratz, K., Zotzmann, J., Nöchel, U., & Lendlein, A. (2013) · Advanced Materials · doi:10.1002/adma.201300880 · Cited by 496
Linear/Network Poly(ε-caprolactone) Blends Exhibiting Shape Memory Assisted Self-Healing (SMASH)
Rodriguez, E. D., Luo, X., & Mather, P. T. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am101012c · Cited by 381
Cited by
Lu, L., & Li, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04105 · Cited by 102
Self-citationBelmonte, A., Lama, G. C., Gentile, G., Fernández-Francos, X., De la Flor, S., Cerruti, P., & Ambrogi, V. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b04610 · Cited by 28
Metadata
- Authors
- Li, G., & Wang, A.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2016-03-25
- Volume
- 54
- Issue
- 14
- Pages
- 1319-1339
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2304226217
- Cited by
- 188
- References
- 26
- FWCI
- 11.80
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cold, warm, and hot programming of shape memory polymers. https://app.cochat.ai/papers/10.1002/polb.24041
- The paper
- Li, G., & Wang, A. (2016). Cold, warm, and hot programming of shape memory polymers. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.24041
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.