The DOI matches its Crossref record; 33 of the 34 references it cites were found in a registry or an index.
Initiation of shape-memory effect by inductive heating of magnetic nanoparticles in thermoplastic polymers
Open accessAbstract
In shape-memory polymers, changes in shape are mostly induced by heating, and exceeding a specific switching temperature, T switch . If polymers cannot be warmed up by heat transfer using a hot liquid or gaseous medium, noncontact triggering will be required. In this article, the magnetically induced shape-memory effect of composites from magnetic nanoparticles and thermoplastic shape-memory polymers is introduced. A polyetherurethane (TFX) and a biodegradable multiblock copolymer (PDC) with poly( p -dioxanone) as hard segment and poly(ε-caprolactone) as soft segment were investigated as matrix component. Nanoparticles consisting of an iron(III)oxide core in a silica matrix could be processed into both polymers. A homogeneous particle distribution in TFX could be shown. Compounds have suitable elastic and thermal properties for the shape-memory functionalization. Temporary shapes of TFX compounds were obtained by elongating at increased temperature and subsequent cooling under constant stress. Cold-drawing of PDC compounds at 25°C resulted in temporary fixation of the mechanical deformation by 50–60%. The shape-memory effect of both composite systems could be induced by inductive heating in an alternating magnetic field ( f = 258 kHz; H = 30 kA·m −1 ). The maximum temperatures achievable by inductive heating in a specific magnetic field depend on sample geometry and nanoparticle content. Shape recovery rates of composites resulting from magnetic triggering are comparable to those obtained by increasing the environmental temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Moreover, thermo-responsive SMPs can also be stimulated by indirect heating methods such as electricity, magnetism, light, and radiation (radio or microwave).25−27”
From Shape-Memory Polymer Nanocomposites of Poly(ε-caprolactone) with the Polystyrene-block-polybutadiene-block-polystyrene-tri-block Copolymer Encapsulated with Metal Oxides (2021) · cites this paper as [25]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“In addition, SMPs can be thermally-triggered by indirect heating via Joule effect (e.g., PURs enriched with carbon nanotubes) [41,42], infra-red (IR) irradiation (e.g., cellulose nanocrystals filled thermoplastics elastomers) [43] or magnetically actuated nanocomposites [44-46].”
From Shape-memory polymers for multiple applications in the materials world (2016) · cites this paper as [46]
The cited source says what the claim attributes to it.
In the citing paper
“The incorporation of silica-coated magnetic nanoparticles of iron(III)oxide core into Tecoflex ® enabled the remote actuation of the thermally induced SME in alternating magnetic fields [19].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [19]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
Gupta, A. K., & Gupta, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.012 · Cited by 6,771
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Self-citationIron oxides in the laboratory: preparation and characterization
(1992) · Choice Reviews Online · doi:10.5860/choice.29-2718 · Cited by 2,259
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Self-citationLight-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Self-citationKoerner, H., Price, G., Pearce, N. A., Alexander, M., & Vaia, R. A. (2004) · Nature Materials · doi:10.1038/nmat1059 · Cited by 1,034
Polyurethanes having shape memory effects
Kim, B. K., Lee, S. Y., & Xu, M. (1996) · Polymer · doi:10.1016/s0032-3861(96)00442-9 · Cited by 693
Physical limits of hyperthermia using magnetite fine particles
Hergt, R., Andra, W., d'Ambly, C. G., Hilger, I., Kaiser, W. A., Richter, U., & Schmidt, H.-G. (1998) · IEEE Transactions on Magnetics · doi:10.1109/20.718537 · Cited by 658
Electroactive shape-memory polyurethane composites incorporating carbon nanotubes
Cho, J. W., Kim, J. W., Jung, Y. C., & Goo, N. S. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400492 · Cited by 603
Size dependence of specific power absorption of Fe3O4 particles in AC magnetic field
Ma, M., Wu, Y., Zhou, J., Sun, Y., Zhang, Y., & Gu, N. (2004) · Journal of Magnetism and Magnetic Materials · doi:10.1016/s0304-8853(03)00426-8 · Cited by 497
Research works printed but not linked: 3
- 10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- A. Lendlein, S. Kelch Clin. Hemorheol. Microcirc 32, 105–116 (2005).
- J. Hu, X. Ding, X. Tao, J. Yu J. Dong Hua Univ. (Engl. Ed.) 19, 3 (2002).
Cited by
A review of shape memory alloy research, applications and opportunities
Mohd Jani, J., Leary, M., Subic, A., & Gibson, M. A. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.084 · Cited by 4,078
“Maximum strain and specific energy versus maximum addition, SMPs can sustain two or more shape changes [181– 183] when triggered by thermal (heating [184] or cooling [185]), electricity [186], magnetic field [187], light [188] or solutions [189] (e.”
BackgroundBehl, M., & Lendlein, A. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70047-0 · Cited by 1,965
Self-citationReview of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
“SMPs can be activated not only by heat [14,15] and magnetism [16,17] similar to SMAs, but also by electricity [18,19], light [20] moisture [21,22], even certain chemical stimulus (e.”
BackgroundSelf-healing polymeric materials
Yang, Y., & Urban, M. W. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60109a · Cited by 1,444
Metadata
- Authors
- Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A.
- Affiliations
- *Institute of Polymer Research, GKSS Research Centre Geesthacht, 14513 Teltow, Germany; and
- DKI, German Institute for Polymers, 64289 Darmstadt, Germany
- Venue
- Proceedings of the National Academy of Sciences
- Publisher
- National Academy of Sciences
- Published
- 2006-02-28
- Volume
- 103
- Issue
- 10
- Pages
- 3540-3545
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- PMC
- PMC1383650
- OpenAlex
- W2130189877
- Cited by
- 819
- References
- 34
- Citations by year
- 2026: 18 · 2025: 29 · 2024: 33 · 2023: 18 · 2022: 40 · 2021: 52 · 2020: 40 · 2019: 51 · 2018: 40 · 2017: 48 · 2016: 47 · 2015: 48 · 2014: 49 · 2013: 60 · 2012: 55
- FWCI
- 30.36
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Proceedings of the National Academy of Sciences (publishedVersion)
- Europe PMC (PubMed Central) (publishedVersion)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- Keywords
- shape memory polymers, magnetic nanoparticles, induction heating, thermoplastics, polyether polyurethane, poly(p-dioxanone), polycaprolactone, iron oxide nanoparticles, silica-coated nanoparticles, cold drawing, shape recovery, polymer composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Initiation of shape-memory effect by inductive heating of magnetic nanoparticles in thermoplastic polymers. https://app.cochat.ai/papers/10.1073/pnas.0600079103
- The paper
- Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A. (2006). Initiation of shape-memory effect by inductive heating of magnetic nanoparticles in thermoplastic polymers. Proceedings of the National Academy of Sciences. https://doi.org/10.1073/pnas.0600079103
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.