The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Thiol‐acrylate main‐chain liquid‐crystalline elastomers with tunable thermomechanical properties and actuation strain
Abstract
The purpose of this study was to investigate the influence of cross‐linking on the thermomechanical behavior of liquid‐crystalline elastomers (LCEs). Main‐chain LCE networks were synthesized via a thiol‐acrylate Michael addition reaction. The robust nature of this reaction allowed for tailoring of the behavior of the LCEs by varying the concentration and functionality of the cross‐linker. The isotropic rubbery modulus, glass transition temperature, and strain‐to‐failure showed strong dependence on cross‐linker concentration and ranged from 0.9 MPa, 3 °C, and 105% to 3.2 MPa, 25 °C, and 853%, respectively. The isotropic transition temperature (Ti) was shown to be influenced by the functionality of the cross‐linker, ranging from 70 °C to 80 °C for tri‐ and tetra‐functional cross‐linkers. The magnitude of actuation can be tailored by controlling the amount of cross‐linker and applied stress. Actuation increased with increased applied stress and decreased with greater amounts of cross‐linking. The maximum strain actuation achieved was 296% under 100 kPa of bias stress, which resulted in work capacity of 296 kJ/m 3 for the lowest cross‐linked networks. Overall, the experimental results provide a fundamental insight linking thermomechanical properties and actuation to a homogenous polydomain nematic LCE networks with order parameters of 0.80 when stretched. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys.2017,55, 157–168
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liquid crystal elastomers with mechanical properties of a muscle
Thomsen, D. L., Keller, P., Naciri, J., Pink, R., Jeon, H., Shenoy, D., & Ratna, B. R. (2001) · Macromolecules · doi:10.1021/ma001639q · Cited by 689
Combined one-way and two-way shape memory in a glass-forming nematic network
Qin, H., & Mather, P. T. (2009) · Macromolecules · doi:10.1021/ma8022926 · Cited by 179
Viscoelasticity of the polydomain-monodomain transition in main-chain liquid crystal elastomers
Azoug, A., Vasconcellos, V., Dooling, J., Saed, M., Yakacki, C. M., & Nguyen, T. D. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.022 · Cited by 85
Self-citation
Cited by
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
Self-citationA multifunctional shape-morphing elastomer with liquid metal inclusions
Ford, M. J., Ambulo, C. P., Kent, T. A., Markvicka, E. J., Pan, C., Malen, J., Ware, T. H., & Majidi, C. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1911021116 · Cited by 337
McCracken, J. M., Donovan, B. R., & White, T. J. (2020) · Advanced Materials · doi:10.1002/adma.201906564 · Cited by 333
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
Self-citation
Metadata
- Authors
- Saed, M. O., Torbati, A. H., Starr, C. A., Visvanathan, R., Clark, N. A., & Yakacki, C. M.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2016-10-14
- Volume
- 55
- Issue
- 2
- Pages
- 157-168
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2530663661
- Cited by
- 166
- References
- 3
- FWCI
- 9.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.