The DOI matches its Crossref record; 294 of the 294 references it cites were found in a registry or an index.
3D Bioprinting: from Benches to Translational Applications
Open accessAbstract
Over the last decades, the fabrication of 3D tissues has become commonplace in tissue engineering and regenerative medicine. However, conventional 3D biofabrication techniques such as scaffolding, microengineering, and fiber and cell sheet engineering are limited in their capacity to fabricate complex tissue constructs with the required precision and controllability that is needed to replicate biologically relevant tissues. To this end, 3D bioprinting offers great versatility to fabricate biomimetic, volumetric tissues that are structurally and functionally relevant. It enables precise control of the composition, spatial distribution, and architecture of resulting constructs facilitating the recapitulation of the delicate shapes and structures of targeted organs and tissues. This Review systematically covers the history of bioprinting and the most recent advances in instrumentation and methods. It then focuses on the requirements for bioinks and cells to achieve optimal fabrication of biomimetic constructs. Next, emerging evolutions and future directions of bioprinting are discussed, such as freeform, high‐resolution, multimaterial, and 4D bioprinting. Finally, the translational potential of bioprinting and bioprinted tissues of various categories are presented and the Review is concluded by exemplifying commercially available bioprinting platforms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–294 of 294
Farrugia, B. L., Brown, T. D., Upton, Z., Hutmacher, D. W., Dalton, P. D., & Dargaville, T. R. (2013) · Biofabrication · doi:10.1088/1758-5082/5/2/025001 · Cited by 201
Adipose-Derived Mesenchymal Stem Cells: Biology and Potential Applications
Minteer, D., Marra, K. G., & Rubin, J. P. (2012) · Advances in Biochemical Engineering/Biotechnology · doi:10.1007/10_2012_146 · Cited by 201
Pan, T., Song, W., Cao, X., & Wang, Y. (2016) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.01.007 · Cited by 201
Co-culture systems for vascularization — Learning from nature
Kirkpatrick, C. J., Fuchs, S., & Unger, R. E. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.01.009 · Cited by 198
Thiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting
Ooi, H. W., Mota, C., ten Cate, A. T., Calore, A., Moroni, L., & Baker, M. B. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00696 · Cited by 198
Yu, C., Duan, Z., Yuan, P., Li, Y., Su, Y., Zhang, X., Pan, Y., Dai, L. L., Nuzzo, R. G., Huang, Y., et al. (2013) · Advanced Materials · doi:10.1002/adma.201204180 · Cited by 193
3D printed nanocomposite matrix for the study of breast cancer bone metastasis
Zhu, W., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2015.09.010 · Cited by 193
From cardiac tissue engineering to heart-on-a-chip: beating challenges
Zhang, Y. S., Aleman, J., Arneri, A., Bersini, S., Piraino, F., Shin, S. R., Dokmeci, M. R., & Khademhosseini, A. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034006 · Cited by 189
Self-citationSynthetic Mimics of the Extracellular Matrix: How Simple is Complex Enough?
Kyburz, K. A., & Anseth, K. S. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1297-4 · Cited by 189
Solution‐phase exfoliation of graphite for ultrafast photonics
Hasan, T., Torrisi, F., Sun, Z., Popa, D., Nicolosi, V., Privitera, G., Bonaccorso, F., & Ferrari, A. C. (2010) · physica status solidi (b) · doi:10.1002/pssb.201000339 · Cited by 186
Oladipupo, S., Hu, S., Kovalski, J., Yao, J., Santeford, A., Sohn, R. E., Shohet, R., Maslov, K., Wang, L. V., & Arbeit, J. M. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1101321108 · Cited by 183
Nanofiber Scaffolds with Gradients in Mineral Content for Spatial Control of Osteogenesis
Liu, W., Lipner, J., Xie, J., Manning, C. N., Thomopoulos, S., & Xia, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405418g · Cited by 182
Self-citationPatient‐Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds
Faramarzi, N., Yazdi, I. K., Nabavinia, M., Gemma, A., Fanelli, A., Caizzone, A., Ptaszek, L. M., Sinha, I., Khademhosseini, A., Ruskin, J. N., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701347 · Cited by 182
Designer protein delivery: From natural to engineered affinity-controlled release systems
Pakulska, M. M., Miersch, S., & Shoichet, M. S. (2016) · Science · doi:10.1126/science.aac4750 · Cited by 181
Nanofibrous Hydrogels with Spatially Patterned Biochemical Signals to Control Cell Behavior
Wade, R. J., Bassin, E. J., Gramlich, W. M., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201404993 · Cited by 179
Huang, C.-T., Kumar Shrestha, L., Ariga, K., & Hsu, S.-H. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01594a · Cited by 178
Silica Coated Single Walled Carbon Nanotubes
Whitsitt, E. A., & Barron, A. R. (2003) · Nano Letters · doi:10.1021/nl034186m · Cited by 176
Duarte Campos, D. F., Blaeser, A., Buellesbach, K., Sen, K. S., Xun, W., Tillmann, W., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201501033 · Cited by 173
Betsch, M., Cristian, C., Lin, Y., Blaeser, A., Schöneberg, J., Vogt, M., Buhl, E. M., Fischer, H., & Duarte Campos, D. F. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800894 · Cited by 173
In situ repair of bone and cartilage defects using 3D scanning and 3D printing
Li, L., Yu, F., Shi, J., Shen, S., Teng, H., Yang, J., Wang, X., & Jiang, Q. (2017) · Scientific Reports · doi:10.1038/s41598-017-10060-3 · Cited by 172
Self-citationBrown, T. D., Edin, F., Detta, N., Skelton, A. D., Hutmacher, D. W., & Dalton, P. D. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.07.034 · Cited by 170
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Shanjani, Y., Pan, C. C., Elomaa, L., & Yang, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045008 · Cited by 169
Castilho, M., Hochleitner, G., Wilson, W., van Rietbergen, B., Dalton, P. D., Groll, J., Malda, J., & Ito, K. (2018) · Scientific Reports · doi:10.1038/s41598-018-19502-y · Cited by 169
Ali, M., Pagès, E., Ducom, A., Fontaine, A., & Guillemot, F. (2014) · Biofabrication · doi:10.1088/1758-5082/6/4/045001 · Cited by 164
Nerve guides manufactured from photocurable polymers to aid peripheral nerve repair
Pateman, C. J., Harding, A. J., Glen, A., Taylor, C. S., Christmas, C. R., Robinson, P. P., Rimmer, S., Boissonade, F. M., Claeyssens, F., & Haycock, J. W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.01.055 · Cited by 164
Ning, L., Sun, H., Lelong, T., Guilloteau, R., Zhu, N., Schreyer, D. J., & Chen, D. (2018) · Biofabrication · doi:10.1088/1758-5090/aacd30 · Cited by 163
3D bioprinting of biomimetic aortic vascular constructs with self‐supporting cells
Kucukgul, C., Ozler, S. B., Inci, I., Karakas, E., Irmak, S., Gozuacik, D., Taralp, A., & Koc, B. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25493 · Cited by 161
Three-dimensional bioprinting of embryonic stem cells directs highly uniform embryoid body formation
Ouyang, L., Yao, R., Mao, S., Chen, X., Na, J., & Sun, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044101 · Cited by 161
Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures
Jin, Y., Compaan, A., Bhattacharjee, T., & Huang, Y. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161
Lee, S.-J., Nowicki, M., Harris, B., & Zhang, L. G. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0353 · Cited by 161
High‐Resolution Projection Microstereolithography for Patterning of Neovasculature
Raman, R., Bhaduri, B., Mir, M., Shkumatov, A., Lee, M. K., Popescu, G., Kong, H., & Bashir, R. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500721 · Cited by 159
Gruene, M., Pflaum, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Wilhelmi, M., Haverich, A., & Chichkov, B. N. (2011) · Biofabrication · doi:10.1088/1758-5082/3/1/015005 · Cited by 158
Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting
Law, N., Doney, B., Glover, H., Qin, Y., Aman, Z. M., Sercombe, T. B., Liew, L. J., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.09.031 · Cited by 158
3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking
Petta, D., Armiento, A. R., Grijpma, D., Alini, M., Eglin, D., & D’Este, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadf58 · Cited by 158
Patterned melt electrospun substrates for tissue engineering
Dalton, P. D., Joergensen, N. T., Gröll, J., & Möller, M. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034109 · Cited by 154
Holmes, B. B., Bulusu, K. V., Plesniak, M. W., & Zhang, L. G. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/6/064001 · Cited by 152
Tissue Engineering: Biomedical Applications
Langer, R., Vacanti, J. P., Vacanti, C. A., Atala, A., Freed, L. E., & Vunjak‐Novakovic, G. (1995) · Tissue Engineering · doi:10.1089/ten.1995.1.151 · Cited by 151
A perspective on 4D bioprinting
An, J., Chua, C. K., & Mironov, V. (2015) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.003 · Cited by 148
Luo, Y., Lode, A., & Gelinsky, M. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200303 · Cited by 147
Inkjet Printing of Transparent, Electrically Conducting Single‐Walled Carbon‐Nanotube Composites
Small, W. R., & Panhuis, M. I. H. (2007) · Small · doi:10.1002/smll.200700110 · Cited by 144
Cell-laden microfibers for bottom-up tissue engineering
Onoe, H., & Takeuchi, S. (2014) · Drug Discovery Today · doi:10.1016/j.drudis.2014.10.018 · Cited by 144
Reversible shape-shifting in polymeric materials
Zhou, J., & Sheiko, S. S. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24014 · Cited by 144
Patterned prevascularised tissue constructs by assembly of polyelectrolyte hydrogel fibres
Leong, M. F., Toh, J. K. C., Du, C., Narayanan, K., Lu, H., Lim, T. C., Wan, A. C. A., & Ying, J. Y. (2013) · Nature Communications · doi:10.1038/ncomms3353 · Cited by 143
Ren, X., Wang, F., Chen, C., Gong, X., Yin, L., & Yang, L. (2016) · BMC Musculoskeletal Disorders · doi:10.1186/s12891-016-1130-8 · Cited by 143
Advances in nanofibrous scaffolds for biomedical applications: From electrospinning to self-assembly
Wade, R. J., & Burdick, J. A. (2014) · Nano Today · doi:10.1016/j.nantod.2014.10.002 · Cited by 141
Skardal, A., Murphy, S. V., Crowell, K., Mack, D. L., Atala, A., & Söker, S. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33736 · Cited by 133
Application of Machine Learning in 3D Bioprinting: Focus on Development of Big Data and Digital Twin
An, J., Chua, C. K., & Mironov, V. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i1.342 · Cited by 130
Role of osteoblast–fibroblast interactions in the formation of the ligament‐to‐bone interface
Wang, I. E., Shan, J., Choi, R., Oh, S., Kepler, C. K., Chen, F. H., & Lu, H. H. (2007) · Journal of Orthopaedic Research® · doi:10.1002/jor.20475 · Cited by 126
Gelatin methacrylamide hydrogel with graphene nanoplatelets for neural cell-laden 3D bioprinting
Zhu, W., Harris, B. T., & Zhang, L. G. (2016) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2016.7591649 · Cited by 114
Cellular and molecular pathways of structural damage in rheumatoid arthritis
Steffen, U., & Schett, G. A. (2017) · Seminars in Immunopathology · doi:10.1007/s00281-017-0634-0 · Cited by 106
Unger, R. E., Dohle, E., & Kirkpatrick, C. J. (2015) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.03.012 · Cited by 105
Xu, Y., Hu, Y., Liu, C., Yao, H., Liu, B., & Mi, S. (2018) · Materials · doi:10.3390/ma11091581 · Cited by 103
High-quality single-layer graphene via reparative reduction of graphene oxide
Dai, B., Fu, L., Liao, L., Liu, N., Yan, K., Chen, Y., & Liu, Z. (2011) · Nano Research · doi:10.1007/s12274-011-0099-8 · Cited by 101
Development of Bioink from Decellularized Tendon Extracellular Matrix for 3D Bioprinting
Toprakhisar, B., Nadernezhad, A., Bakirci, E., Khani, N., Skvortsov, G. A., & Koc, B. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800024 · Cited by 101
Gradient nanocomposite hydrogels for interface tissue engineering
Cross, L., Shah, K. G., Palani, S., Peak, C. W., & Gaharwar, A. K. (2017) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2017.02.022 · Cited by 98
Three-Dimensional Bioprinting Strategies for Tissue EngineeringPreprint
Zhang, Y. S., Öklü, R., Dokmeci, M. R., & Khademhosseini, A. (2017) · Cold Spring Harbor Perspectives in Medicine · doi:10.1101/cshperspect.a025718 · Cited by 97
Self-citationLu, H., Liu, Y., Gou, J., Leng, J., & Du, S. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/7/075021 · Cited by 92
Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics
Park, J. S., Kim, T., & Kim, W. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-03365-w · Cited by 92
Effects of mechanical loading on human mesenchymal stem cells for cartilage tissue engineering
Choi, J. R., Yong, K. W., & Choi, J. Y. (2017) · Journal of Cellular Physiology · doi:10.1002/jcp.26018 · Cited by 91
Out‐of‐Plane 3D‐Printed Microfibers Improve the Shear Properties of Hydrogel Composites
de Ruijter, M., Hrynevich, A., Haigh, J. N., Hochleitner, G., Castilho, M. D., Gröll, J., Malda, J., & Dalton, P. D. (2017) · Small · doi:10.1002/smll.201702773 · Cited by 91
Inkjet–Spray Hybrid Printing for 3D Freeform Fabrication of Multilayered Hydrogel Structures
Yoon, S., Park, J. A., Lee, H., Yoon, W., Hwang, D. S., & Jung, S. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800050 · Cited by 90
Nagao, R. J., Xu, J. H., Luo, P., Xue, J., Wang, Y., Kotha, S. S., Zeng, W., Fu, X., Himmelfarb, J., & Zheng, Y. Y. (2016) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0213 · Cited by 89
Shanmugasundaram, T., Radhakrishnan, M., Gopikrishnan, V., Kadirvelu, K., & Balagurunathan, R. (2017) · Nanoscale · doi:10.1039/c7nr04979j · Cited by 88
Kang, L. H., Armstrong, P. A., Lee, L. J., Duan, B., Kang, K. H., & Butcher, J. T. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1619-1 · Cited by 87
Alarçın, E., Lee, T. Y., Karuthedom, S., Mohammadi, M., Brennan, M. Á., Lee, D. H., Marrella, A., Zhang, J. C., Syla, D., Zhang, Y. S., et al. (2018) · Biomaterials Science · doi:10.1039/c8bm00293b · Cited by 87
Self-citationBalestrini, J. L., Gard, A. L., Gerhold, K. A., Wilcox, E. C., Liu, A., Schwan, J., Le, A. V., Baevova, P., Dimitrievska, S., Zhao, L., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.025 · Cited by 86
Biofabrication of human articular cartilage: a path towards the development of a clinical treatment
Onofrillo, C., Duchi, S., O’Connell, C. D., Blanchard, R., O’Connor, A. J., Scott, M., Wallace, G. G., Choong, P., & Bella, C. D. (2018) · Biofabrication · doi:10.1088/1758-5090/aad8d9 · Cited by 86
Liu, H., Yang, L., Zhang, E., Zhang, R., Cai, D., Zhu, S., Ran, J., Bunpetch, V., Cai, Y., Heng, B. C., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.027 · Cited by 85
Fabrication of three-dimensional scaffolds for heterogeneous tissue engineering
Han, L., Suri, S., Schmidt, C. E., & Chen, S. (2010) · Biomedical Microdevices · doi:10.1007/s10544-010-9425-2 · Cited by 77
Roles of neural stem cells in the repair of peripheral nerve injury
Hu, C.-D., Wang, Y., Wang, C., Lu, C., & Peng, J. (2017) · Neural Regeneration Research · doi:10.4103/1673-5374.221171 · Cited by 76
Zhu, K., Chen, N., Liu, X., Mu, X., Zhang, W., Wang, C., & Zhang, Y. S. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800127 · Cited by 75
Self-citationAmniotic fluid-derived stem cells in regenerative medicine research
Joo, S., Ko, I. K., Atala, A., Yoo, J. J., & Lee, S. J. (2012) · Archives of Pharmacal Research · doi:10.1007/s12272-012-0207-7 · Cited by 73
Electrospinning of Grooved Polystyrene Fibers: Effect of Solvent Systems
Liu, W. H., Huang, C., & Jin, X. (2015) · Nanoscale Research Letters · doi:10.1186/s11671-015-0949-5 · Cited by 72
Self-citationHuang, C., Tang, Y., Liu, X., Sutti, A., Ke, Q., Mo, X., Wang, X., Morsi, Y., & Lin, T. (2011) · Soft Matter · doi:10.1039/c1sm06430d · Cited by 68
Self-citationFlexible electroluminescent device with inkjet-printed carbon nanotube electrodes
Azoubel, S., Shemesh, S., & Magdassi, S. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/34/344003 · Cited by 68
Guo, J. T., Li, C., Ling, S., Huang, W., Chen, Y. G., & Kaplan, D. L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.08.025 · Cited by 64
Three-Dimensional Printing: An Enabling Technology for IR
Sheth, R. A., Balesh, E., Zhang, Y. S., Hirsch, J. A., Khademhosseini, A., & Öklü, R. (2016) · Journal of Vascular and Interventional Radiology · doi:10.1016/j.jvir.2016.02.029 · Cited by 62
Self-citationInverse opal scaffolds for applications in regenerative medicine
Zhang, Y. S., Choi, S., & Younan Xia, A. (2013) · Soft Matter · doi:10.1039/c3sm52063c · Cited by 61
Self-citationMultilayer scaffolds in orthopaedic tissue engineering
Ateşok, K., Doral, M. N., Karlsson, J., Egol, K. A., Jazrawi, L. M., Coelho, P. G., Martinez, A., Matsumoto, T., Owens, B. D., Ochi, M., et al. (2014) · Knee Surgery Sports Traumatology Arthroscopy · doi:10.1007/s00167-014-3453-z · Cited by 58
Hydrophobic Hydrogels: Toward Construction of Floating (Bio)microdevices
Oliveira, N. M., Zhang, Y. S., Ju, J., Chen, A., Chen, Y., Sonkusale, S., Dokmeci, M. R., Reis, R. L., Mano, J. F., & Khademhosseini, A. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04445 · Cited by 58
Self-citationBajaj, P., Marchwiany, D. A., Duarte, C. A., & Bashir, R. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200318 · Cited by 57
3D-printed biological organs: medical potential and patenting opportunity
Yoo, S. (2015) · Expert Opinion on Therapeutic Patents · doi:10.1517/13543776.2015.1019466 · Cited by 55
BioPen: direct writing of functional materials at the point of care
Han, Y., Hu, J., Genin, G. M., Lu, T. J., & Xu, F. (2014) · Scientific Reports · doi:10.1038/srep04872 · Cited by 49
Choi, J. W., Ha, Y. M., Lee, S. H., & Choi, K. H. (2006) · Journal of Mechanical Science and Technology · doi:10.1007/bf02916326 · Cited by 48
Tissue Engineering Using Laminar Cellular Assemblies
Yang, J., Yamato, M., Sekine, H., et al. (2009) · Advanced Materials · doi:10.1002/adma.200801990 · Cited by 46
Self-citationBautista, C. A., Park, H.-J., Mazur, C. M., Aaron, R. K., & Bilgen, B. (2016) · PLoS ONE · doi:10.1371/journal.pone.0158976 · Cited by 46
Bi, H., Ming, L., Cheng, R., Luo, H., Zhang, Y., & Jin, Y. J. (2016) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2161 · Cited by 44
Self-citationMultiple Facets for Extracellular Matrix Mimicking in Regenerative Medicine
Zhang, Y. S., & Younan Xia, A. (2015) · Nanomedicine · doi:10.2217/nnm.15.10 · Cited by 43
Self-citationThree-dimensional bioprinting is not only about cell-laden structures
Zhang, H., Xing, T., Yin, R.-X., Shi, Y., Yang, S.-M., & Zhang, W.-J. (2016) · Chinese Journal of Traumatology · doi:10.1016/j.cjtee.2016.06.007 · Cited by 33
Peripheral Nerve Injury in Cardiac Surgery
Jellish, W. S., & Oftadeh, M. (2017) · Journal of Cardiothoracic and Vascular Anesthesia · doi:10.1053/j.jvca.2017.08.030 · Cited by 33
The influence of substrate topography and biomaterial substance on skin wound healing
Ghanavati, Z., Neisi, N., Bayati, V., & Makvandi, M. (2015) · Anatomy & Cell Biology · doi:10.5115/acb.2015.48.4.251 · Cited by 26
Organ reconstruction: Dream or reality for the future
Stoltz, J. F., Zhang, L., Ye, J., & de Isla, N. (2017) · Bio-Medical Materials and Engineering · doi:10.3233/bme-171633 · Cited by 26
Helal‐Neto, E., Brandão-Costa, R. M., Saldanha-Gama, R. F. G., Ribeiro‐Pereira, C., Midlej, V. D. V. P., Benchimol, M., Morandi, V., & Barja‐Fidalgo, C. (2016) · Journal of Cellular Physiology · doi:10.1002/jcp.25358 · Cited by 23
Senador, D., Kaur, J., Alvarez, A., et al. (2017) · American Journal of Physiology-Regulatory, Integrative and Comparative Physiology · doi:10.1152/ajpregu.00515.2016 · Cited by 6
Cited by
Wound Healing: From Passive to Smart Dressings
Farahani, M., & Shafiee, A. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100477 · Cited by 794
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, S., Qin, S., He, M., Zhou, D., Qin, Q., & Wang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108238 · Cited by 533
Development of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions
Rodrigues, J., Heinrich, M. A., Teixeira, L. M., & Prakash, J. (2021) · Trends in Cancer · doi:10.1016/j.trecan.2020.10.009 · Cited by 405
Self-citation
Metadata
- Authors
- Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., Prakash, J., Xie, J., & Zhang, Y. S.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2019-04-29
- Volume
- 15
- Issue
- 23
- Pages
- e1805510-e1805510
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2943437279
- Cited by
- 437
- References
- 294
- FWCI
- 17.25
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.