The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking
Open accessAbstract
Extrusion-based three-dimensional bioprinting relies on bioinks engineered to combine viscoelastic properties for extrusion and shape retention, and biological properties for cytocompatibility and tissue regeneration. To satisfy these conflicting requirements, bioinks often utilize either complex mixtures or complex modifications of biopolymers. In this paper we introduce and characterize a bioink exploiting a dual crosslinking mechanism, where an enzymatic reaction forms a soft gel suitable for cell encapsulation and extrusion, while a visible light photo-crosslinking allows shape retention of the printed construct. The influence of cell density and cell type on the rheological and printability properties was assessed correlating the printing outcomes with the damping factor, a rheological characteristic independent of the printing system. Stem cells, chondrocytes and fibroblasts were encapsulated, and their viability was assessed up to 14 days with live/dead, alamar blue and trypan blue assays. Additionally, the impact of the printing parameters on cell viability was investigated. Owing to its straightforward preparation, low modification, presence of two independent crosslinking mechanisms for tuning shear-thinning independently of the final shape fixation, the use of visible green instead of UV light, the possibility of encapsulating and sustaining the viability of different cell types, the hyaluronan bioink here presented is a valid biofabrication tool for producing 3D printed tissue-engineered constructs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Self-citation3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Antich, C., de Vicente, J., Jiménez, G., Chocarro, C., Carrillo, E., Montañez, E., Gálvez-Martín, P., & Marchal, J. A. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.01.046 · Cited by 353
Metadata
- Authors
- Petta, D., Armiento, A. R., Grijpma, D., Alini, M., Eglin, D., & D’Este, M.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2018-09-25
- Volume
- 10
- Issue
- 4
- Pages
- 044104
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2890718654
- Cited by
- 158
- References
- 2
- FWCI
- 6.80
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking. https://app.cochat.ai/papers/10.1088/1758-5090/aadf58
- The paper
- Petta, D., Armiento, A. R., Grijpma, D., Alini, M., Eglin, D., & D’Este, M. (2018). 3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking. Biofabrication. https://doi.org/10.1088/1758-5090/aadf58
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.