The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Flexible 3D Porous MXene Foam for High‐Performance Lithium‐Ion Batteries
Abstract
2D transition‐metal carbides and nitrides, named MXenes, are promising materials for energy storage, but suffer from aggregation and restacking of the 2D nanosheets, which limits their electrochemical performance. In order to overcome this problem and realize the full potential of MXene nanosheets, a 3D MXene foam with developed porous structure is established via a simple sulfur‐template method, which is freestanding, flexible, and highly conductive, and can be directly used as the electrode in lithium‐ion batteries. The 3D porous architecture of the MXene foam offers massive active sites to enhance the lithium storage capacity. Moreover, its foam structure facilitates electrolyte infiltration for fast Li+ transfer. As a result, this flexible 3D porous MXene foam exhibits significantly enhanced capacity of 455.5 mAh g−1 at 50 mA g−1, excellent rate performance (101 mAh g−1 at 18 A g−1), and superior ultralong‐term cycle stability (220 mAh g−1 at 1 A g−1 after 3500 cycles). This work not only demonstrates the great superiority of the 3D porous MXene foam but also proposes the sulfur‐template method for controllable constructing of the 3D foam from 2D nanosheets at a relatively low temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
MXene: a promising transition metal carbide anode for lithium-ion batteries
Naguib, M., Come, J., Dyatkin, B., Presser, V., Taberna, P.-L., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.01.002 · Cited by 1,596
Xie, Y., Naguib, M., Mochalin, V. N., Barsoum, M. W., Gogotsi, Y., Yu, X., Nam, K.-W., Yang, X.-Q., Kolesnikov, A. I., & Kent, P. R. C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja501520b · Cited by 1,537
Flexible MXene/Carbon Nanotube Composite Paper with High Volumetric Capacitance
Zhao, M., Ren, C. E., Ling, Z., Lukatskaya, M. R., Zhang, C., Van Aken, K. L., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404140 · Cited by 1,426
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
MXene molecular sieving membranes for highly efficient gas separation
Ding, L., Wei, Y., Li, L., Zhang, T., Wang, H., Xue, J., Ding, L.-X., Wang, S., Caro, J., & Gogotsi, Y. (2018) · Nature Communications · doi:10.1038/s41467-017-02529-6 · Cited by 1,124
Hollow MXene Spheres and 3D Macroporous MXene Frameworks for Na‐Ion Storage
Zhao, M., Xie, X., Ren, C. E., Makaryan, T., Anasori, B., Wang, G., & Gogotsi, Y. (2017) · Advanced Materials · doi:10.1002/adma.201702410 · Cited by 1,065
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
Xie, X., Zhao, M.-Q., Anasori, B., Maleski, K., Ren, C. E., Li, J., Byles, B. W., Pomerantseva, E., Wang, G., & Gogotsi, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.005 · Cited by 903
Zhao, S., Zhang, H.-B., Luo, J.-Q., Wang, Q.-W., Xu, B., Hong, S., & Yu, Z.-Z. (2018) · ACS Nano · doi:10.1021/acsnano.8b05739 · Cited by 893
Self-citationA Leavening Strategy to Prepare Reduced Graphene Oxide Foams
Niu, Z., Chen, J., Hng, H. H., Ma, J., & Chen, X. (2012) · Advanced Materials · doi:10.1002/adma.201200197 · Cited by 812
Luo, J., Tao, X., Zhang, J., Xia, Y., Huang, H., Zhang, L., Gan, Y., Liang, C., & Zhang, W. (2016) · ACS Nano · doi:10.1021/acsnano.5b07333 · Cited by 765
Liu, Y., Zhang, P., Sun, N., Anasori, B., Zhu, Q., Liu, H., Gogotsi, Y., & Xu, B. (2018) · Advanced Materials · doi:10.1002/adma.201707334 · Cited by 759
Self-citationBao, W., Liu, L., Wang, C., Choi, S., Wang, D., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702485 · Cited by 745
Guo, Y., Zhong, M., Fang, Z., Wan, P., & Yu, G. (2019) · Nano Letters · doi:10.1021/acs.nanolett.8b04514 · Cited by 741
Self-citationZhu, M., Huang, Y., Deng, Q., Zhou, J., Pei, Z., Xue, Q., Huang, Y., Wang, Z., Li, H., Huang, Q., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600969 · Cited by 731
Lian, P., Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Wang, S., Sun, C., Qin, J., Shi, X., & Bao, X. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.002 · Cited by 712
Porous Two‐Dimensional Transition Metal Carbide (MXene) Flakes for High‐Performance Li‐Ion Storage
Ren, C. E., Zhao, M., Makaryan, T., Halim, J., Boota, M., Kota, S., Anasori, B., Barsoum, M. W., & Gogotsi, Y. (2016) · ChemElectroChem · doi:10.1002/celc.201600059 · Cited by 625
Sodium-Ion Intercalation Mechanism in MXene Nanosheets
Kajiyama, S., Szabova, L., Sodeyama, K., Iinuma, H., Morita, R., Gotoh, K., Tateyama, Y., Okubo, M., & Yamada, A. (2016) · ACS Nano · doi:10.1021/acsnano.5b06958 · Cited by 602
3D hybrid porous Mxene-sponge network and its application in piezoresistive sensor
Yue, Y., Liu, N., Liu, W., Li, M., Ma, Y., Luo, C., Wang, S., Rao, J., Hu, X., Su, J., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.020 · Cited by 576
MXene-Bonded Activated Carbon as a Flexible Electrode for High-Performance Supercapacitors
Yu, L., Hu, L., Anasori, B., Liu, Y.-T., Zhu, Q., Zhang, P., Gogotsi, Y., & Xu, B. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00718 · Cited by 533
Self-citationTwo-dimensional Ti 3 C 2 as anode material for Li-ion batteries
Sun, D., Wang, M., Li, Z., Fan, G., Fan, L.-Z., & Zhou, A. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.07.026 · Cited by 525
Opening Two‐Dimensional Materials for Energy Conversion and Storage: A Concept
Xue, Y., Zhang, Q., Wang, W., Cao, H., Yang, Q., & Fu, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602684 · Cited by 442
Lou, S., Cheng, X., Zhao, Y., Lushington, A., Gao, J., Li, Q., Zuo, P., Wang, B., Gao, Y., Ma, Y., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.058 · Cited by 434
3D Porous MXene (Ti3C2)/Reduced Graphene Oxide Hybrid Films for Advanced Lithium Storage
Ma, Z., Zhou, X., Deng, W., Lei, D., & Liu, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17386 · Cited by 389
Li, S., Tuo, P., Xie, J., Zhang, X., Xu, J., Bao, J., Pan, B., & Xie, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.022 · Cited by 346
Wang, Y., Li, Y., Qiu, Z., Wu, X., Zhou, P., Zhou, T., Zhao, J., Miao, Z., Zhou, J., & Zhuo, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00122g · Cited by 309
Xu, M., Lei, S., Qi, J., Dou, Q., Liu, L., Lu, Y., Huang, Q., Shi, S., & Yan, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b00959 · Cited by 266
MXenes/graphene heterostructures for Li battery applications: a first principles study
Aierken, Y., Sevik, C., Gülseren, O., Peeters, F. M., & Çakır, D. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09001c · Cited by 245
Byeon, A., Zhao, M.-Q., Ren, C. E., Halim, J., Kota, S., Urbankowski, P., Anasori, B., Barsoum, M. W., & Gogotsi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04198 · Cited by 239
Chen, C.-M., Zhang, Q., Huang, C.-H., Zhao, X.-C., Zhang, B.-S., Kong, Q.-Q., Wang, M.-Z., Yang, Y.-G., Cai, R., & Sheng Su, D. (2012) · Chemical Communications · doi:10.1039/c2cc32189k · Cited by 218
Charge transfer induced polymerization of EDOT confined between 2D titanium carbide layers
Chen, C., Boota, M., Xie, X., Zhao, M., Anasori, B., Ren, C. E., Miao, L., Jiang, J., & Gogotsi, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00149e · Cited by 191
Zheng, W., Zhang, P., Chen, J., Tian, W. B., Zhang, Y. M., & Sun, Z. M. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10394h · Cited by 173
Self-citationLou, S., Cheng, X., Wang, L., Gao, J., Li, Q., Ma, Y., Gao, Y., Zuo, P., Du, C., & Yin, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.023 · Cited by 167
Synthesis and Electrochemical Properties of Two-Dimensional RGO/Ti3C2Tx Nanocomposites
Shen, C., Wang, L., Zhou, A., Wang, B., Wang, X., Lian, W., Hu, Q., Qin, G., & Liu, X. (2018) · Nanomaterials · doi:10.3390/nano8020080 · Cited by 152
Yang, L., Li, X., He, S., Du, G., Yu, X., Liu, J., Gao, Q., Hu, R., & Zhu, M. H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03083a · Cited by 152
Plate-to-Layer Bi2MoO6/MXene-Heterostructured Anode for Lithium-Ion Batteries
Zhang, P., Wang, D., Zhu, Q., Sun, N., Fu, F., & Xu, B. (2019) · Nano-Micro Letters · doi:10.1007/s40820-019-0312-y · Cited by 119
Self-citationNitrogen and Sulfur Co-Doped 2D Titanium Carbides for Enhanced Electrochemical Performance
Yang, C., Que, W., Tang, Y., Tian, Y., & Yin, X. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1091709jes · Cited by 87
Mao, X., Xiao, T., Zhang, Q., & Liu, Z. (2018) · RSC Advances · doi:10.1039/c8ra01554f · Cited by 10
Cited by
Advances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216
Self-citationZhang, Y., Ruan, K., & Gu, J. (2021) · Small · doi:10.1002/smll.202101951 · Cited by 515
3D MXene Architectures for Efficient Energy Storage and Conversion
Li, K., Liang, M., Wang, H., Wang, X., Huang, Y., Coelho, J., Pinilla, S., Zhang, Y., Qi, F., Nicolosi, V., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000842 · Cited by 498
Recent Advances and Promise of MXene‐Based Nanostructures for High‐Performance Metal Ion Batteries
Dong, Y., Shi, H., & Wu, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000706 · Cited by 369
Recent Advances in Functional 2D MXene‐Based Nanostructures for Next‐Generation Devices
Huang, W., Hu, L., Tang, Y., Xie, Z., & Zhang, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005223 · Cited by 359
Metadata
- Authors
- Zhao, Q., Zhu, Q., Miao, J., Zhang, P., Wan, P., He, L., & Xu, B.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2019-10-24
- Volume
- 15
- Issue
- 51
- Pages
- e1904293-e1904293
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2982229311
- Cited by
- 388
- References
- 43
- FWCI
- 14.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.