Two-stage optimum design of tuned mass dampers with consideration of stroke
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This paper presents a two-stage optimum design procedure for passive tuned mass dampers (PTMDs) to reduce structural dynamic responses with the limitation of PTMD stroke. A new performance index, with the linear combination of structural response ratio and PTMD stroke ratio by a weighting factor α, is proposed. α ranges from 0 to 1.0. The larger the α, the more important the consideration of the stroke. When α equals 1.0, the PTMD is locked. The analytical results show that with little sacrifice of structural control effectiveness, the PTMD stroke can be significantly suppressed when an appropriate α is selected. The numerical simulation of a three-story building under earthquake excitations demonstrated that the proposed optimum PTMD performs as well as the conventional PTMD and its stroke is 30% reduced. Based on the analysis results, it is proved that the new optimum design concept is more flexible and useful in practical application. Copyright © 2009 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Parametric study and simplified design of tuned mass dampers
Rana, R., & Soong, T. T. (1998) · Engineering Structures · doi:10.1016/s0141-0296(97)00078-3 · Cited by 651
Design formulas for tuned mass dampers based on a perturbation technique
Fujino, Y., & Abé, M. (1993) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290221002 · Cited by 276
Performance of tuned mass dampers under wind loads
Kwok, K. C. S., & Samali, B. (1995) · Engineering Structures · doi:10.1016/0141-0296(95)00035-6 · Cited by 206
Vibration suppression for high-speed railway bridges using tuned mass dampers
Wang, J. F., Lin, C. C., & Chen, B. L. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(02)00589-9 · Cited by 173
Self-citationSeismic performance of multiple tuned mass dampers for soil–irregular building interaction systems
Wang, J.-F., & Lin, C.-C. (2005) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2005.02.042 · Cited by 106
Self-citation
Cited by
Wind-Induced Vibration Mitigation in Tall Buildings Using the Tuned Mass-Damper-Inerter
Giaralis, A., & Petrini, F. (2017) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0001863 · Cited by 330
De Domenico, D., & Ricciardi, G. (2018) · Structural Control and Health Monitoring · doi:10.1002/stc.2234 · Cited by 169
Vibration control performance of tuned mass dampers with resettable variable stiffness
Lin, G.-L., Lin, C.-C., Chen, B.-C., & Soong, T.-T. (2015) · Engineering Structures · doi:10.1016/j.engstruct.2014.10.041 · Cited by 77
Self-citationZhang, Z., & Balendra, T. (2013) · Engineering Structures · doi:10.1016/j.engstruct.2013.03.044 · Cited by 56
Miguel, L. F. F., Fadel Miguel, L. F., & Lopez, R. H. (2015) · Optimization and Engineering · doi:10.1007/s11081-014-9269-3 · Cited by 52
Metadata
- Authors
- Wang, J.-F., Lin, C.-C., & Lian, C.-H.
- Venue
- Structural Control and Health Monitoring
- Publisher
- Hindawi Limited
- Published
- 2009-02
- Volume
- 16
- Issue
- 1
- Pages
- 55-72
- ISSN
- 1545-2255 (ISSN-L)
- 1545-2263
- OpenAlex
- W1974668194
- Cited by
- 60
- References
- 5
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Two-stage optimum design of tuned mass dampers with consideration of stroke. https://app.cochat.ai/papers/10.1002/stc.312
- The paper
- Wang, J.-F., Lin, C.-C., & Lian, C.-H. (2009). Two-stage optimum design of tuned mass dampers with consideration of stroke. Structural Control and Health Monitoring. https://doi.org/10.1002/stc.312
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.