Advanced biofuels production by upgrading of pyrolysis bio‐oil
The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
The present work is a review on the production of bio‐oils from biomass pyrolysis, with special emphasis on the different catalytic methods developed so far for the upgrading of this liquid fraction in order to significantly improve its properties, so it can be used as advanced biofuel. After a discussion of the main variables and factors affecting biomass pyrolysis, a number of processes are described here for bio‐oil upgrading, including catalytic pyrolysis, esterification, aldol condensation, ketonization, and hydrodeoxygenation (HDO). All of them are featured by the use of tailored catalysts that may play different roles, such as completing depolymerization of biomass, promoting deoxygenation reactions, and favoring CC bonds formation in order to increase the proportion of components present in the final bio‐oil within the range of liquid fuels.The review highlights the challenges that must still be faced for biomass pyrolysis/bio‐oil upgrading to become a commercial process. Among them, catalyst deactivation is a general issue to be considered as bio‐oil has a strong tendency to polymerize, forming carbonaceous deposits on the catalysts, and contains a large share of water with acidic pH that may damage the catalyst components in liquid‐phase upgrading treatments. Likewise, process integration of bio‐oil upgrading treatments, through more or less complex schemes, is an aspect that should be deeply analyzed in the future as it may be a key element determining the commercial feasibility of the overall process. WIREs Energy Environ 2017, 6:e245. doi: 10.1002/wene.245 This article is categorized under: Bioenergy > Science and Materials Bioenergy > Systems and Infrastructure
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663 · cited 3×
“Heating rate plays a fundamental role in biomass pyrolysis as it influences the nature and composition of final products.(6,20,21,23) Rapid heating rates reduce heat and mass transfer limitations, enhancing the production of volatiles by biomass decomposition reactions and minimizing nondesired secondary reactions lik…”
BackgroundReview of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856 · cited 2×
“heat transfer rate, the residence time, and the feasibility of continuously feeding the biomass and removing the solid char being generated.(58,59) Therefore, although it probably represents only about 10–15% of the total capital cost of an integrated system,(58) a strong research effort has been focused on developing…”
BackgroundProduction of first and second generation biofuels: A comprehensive review
Naik, S. N., Goud, V. V., Rout, P. K., & Dalai, A. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.003 · Cited by 3,264 · cited 1×
“First-generation biofuels, mainly bioethanol and biodiesel, have suffered important limitations to achieve targets for oil-derived products substitution, climate change mitigation, and economic growth due to a variety of reasons, such as the high water and energy consumption during their production, the biofuel versus…”
BackgroundCatalytic conversion of biomass to biofuels
Alonso, D. M., Bond, J. Q., & Dumesic, J. A. (2010) · Green Chemistry · doi:10.1039/c004654j · Cited by 2,333 · cited 1×
“Biomass pyrolysis has the advantage, compared to gasification and liquefaction, of being a relatively simple process as it occurs under atmospheric pressure and moderate temperatures in the presence of an inert gas, usually nitrogen.(5) When lignocellulose is heated at temperatures in the range of 400–700 C, their com…”
BackgroundKan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239 · cited 6×
“In general, bio-oil yield is maximized at temperatures in the range 400–550 C.(6,18,21) Temperatures higher than 600 C favor secondary decomposition and cracking reactions, which increase the gas production at the expense of oil and char.”
BackgroundInfluentialEffect of process parameters on production of biochar from biomass waste through pyrolysis: A review
Tripathi, M., Sahu, J. N., & Ganesan, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.122 · Cited by 1,759
Biofuels Production through Biomass Pyrolysis—A Technological Review
Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012) · Energies · doi:10.3390/en5124952 · Cited by 1,427 · cited 2×
“Great efforts have been focused in the last decades on the development of fast-pyrolysis processes aimed at the production of bio-oil.(50) Pyrolysis temperature significantly affects both bio-oil yield and composition.”
BackgroundBiomass upgrading by torrefaction for the production of biofuels: A review
van der Stelt, M. J. C., Gerhauser, H., Kiel, J. H. A., & Ptasinski, K. J. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.06.023 · Cited by 1,262 · cited 2×
“On the other hand, torrefaction is a pretreatment that consists of a slow pyrolysis process performed at atmospheric pressure and low temperatures (200–300 C).(45,46) Torrefaction provokes an improvement of the energy density and grindability of the biomass, decreasing its O/C ratio.”
BackgroundInfluence of inorganic salts on the primary pyrolysis products of cellulose
Patwardhan, P. R., Satrio, J. A., Brown, R. C., & Shanks, B. H. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.112 · Cited by 799
Cited by
Electrocatalytic Hydrogenation of Biomass-Derived Organics: A Review
Akhade, S. A., Singh, N., Gutiérrez, O. Y., Lopez-Ruiz, J., Wang, H., Holladay, J. D., Liu, Y., Karkamkar, A., Weber, R. S., Padmaperuma, A. B., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00158 · Cited by 440
Perkins, G., Bhaskar, T., & Konarova, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.048 · Cited by 267
Critical review of the role of ash content and composition in biomass pyrolysis
Puri, L., Hu, Y., & Naterer, G. (2024) · Frontiers in Fuels · doi:10.3389/ffuel.2024.1378361 · Cited by 226
Pyrogenic carbon capture and storage
Schmidt, H., Anca‐Couce, A., Hagemann, N., Werner, C., Gerten, D., Lucht, W., & Kammann, C. (2019) · GCB Bioenergy · doi:10.1111/gcbb.12553 · Cited by 186
Biogeochemical potential of biomass pyrolysis systems for limiting global warming to 1.5 °C
Werner, C., Schmidt, H.-P., Gerten, D., Lucht, W., & Kammann, C. (2018) · Environmental Research Letters · doi:10.1088/1748-9326/aabb0e · Cited by 69
“Pyrolytic bio-oil has comparable properties to fossil crude oil, with a less complex chemistry, but similar environmental toxicity following suitable post-pyrolysis treatment (Zhang et al 2007, Fermoso et al 2017, Louwes et al 2017, Varma and Mondal 2017).”
BackgroundGreen catalyst for clean fuel production via hydrodeoxygenation
YÜCEL, S. B., DONAR, Y. O., ERGENEKON, S., ÖZOYLUMLU, B., & SINAĞ, A. (2023) · Turkish Journal of Chemistry · doi:10.55730/1300-0527.3589 · Cited by 10
Metadata
- Authors
- Fermoso, J., Pizarro, P., Coronado, J. M., & Serrano, D. P.
- Venue
- WIREs Energy and Environment
- Publisher
- Wiley
- Published
- 2017-02-23
- Volume
- 6
- Issue
- 4
- ISSN
- 2041-8396 (ISSN-L)
- 2041-840X
- OpenAlex
- W2590439281
- Cited by
- 115
- References
- 18
- FWCI
- 5.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.