Hot corrosion of materials: Fundamental studies
The DOI matches its Crossref record; 6 of the 31 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“As with the thin aqueous layer on alloys in atmospheric corrosion, this molten salt layer is a pure ionic conductor which separates the alloys from the gas phase physically [1, 19, 47].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
In the citing paper
“These sulfate salts easily attach onto the surfaces of high temperature components and are melted to form a thin fused salt film at elevated temperatures.”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
In the citing paper
“The predominant chemical reactant involved in hot corrosion has been confirmed to be sodium sulfate (Na2SO4), due to its extraordinary stability over a wide range of temperatures and oxygen partial pressures [1, 6, 19].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
In the citing paper
“The diagram demonstrates the good stability of Na2SO4 over a wide range of log and .”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
In the citing paper
“In the O2-SO2-SO3 environment (Eq. (1)), the solubilities of both O2 and SO2 in molten salt are poor. In contrast, SO3 can dissolve in molten salt because of the formation of pyrosulfate ions through Eq. (2) [1, 19].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
(2006) · Electrochemistry and Corrosion Science · doi:10.1007/1-4020-7860-9_10 · Cited by 1,814
The Hot Corrosion of Metals by Molten Salts
Rapp, R. A. (1981) · ECS Proceedings Volumes · doi:10.1149/198110.0159pv · Cited by 136
Self-citationDeposition and Corrosion in Gas Turbines
Billingham, J. (1974) · British Corrosion Journal · doi:10.1179/000705974798321738 · Cited by 135
Rapp, R. A. (1989) · Studies in inorganic chemistry · doi:10.1016/b978-0-444-88534-0.50016-3 · Cited by 31
Self-citationHigh temperature corrosion and protection
Colson, J. C., Strafford, K. N., & Lambertin, M. (1986) · Journal de Chimie Physique · doi:10.1051/jcp/1986830745 · Cited by 27
Solubility of CeO2 in Molten Na2SO4–10 mol% NaVO3 Salt Solution at 900°C
Zhang, Y. S. (1994) · ECS Proceedings Volumes · doi:10.1149/199413.0171pv · Cited by 2
Self-citation
Research works printed but not linked: 69
- W.T. Reid, R.C. Corey, and BJ. Cross, Trans. ASME, 67 (1945), p. 279.
- F.J. Wall and S.T. Michael, ASTM Spec. Tech. Publ. STP 421 (1967), p. 223.
- K.J. Kohl et al., J. Electrochem. Soc., 126 (1979), p. 1054.
- K.L. Luthra and H.S. Spacil, J. Electrochem. Soc., 129 (1982), p. 649.
- E.L. Simons, G.V. Browning, and H.A. Liebhafsky, Corrosion, 11 (1955), p. 505.
- A.U. Seybolt, Trans. AIME, 242 (1968), p. 1955.
- N.S. Bornstein and M.A. DeCrescente, Trans. AIME, 245 (1969), p. 583.
- N.S. Bornstein and M.A. DeCrescente, Met. Trans.,2 (1971), p. 2875.
- J.A. Goebel and F.S. Pettit, Met. Trans., 1 (1970), p. 1943.
- J.A. Goebel, F.S. Pettit, and G.W. Goward, Met. Trans., 4 (1973), p. 261.
- J. Stringer, Annual Review of Materials Sci., 7, ed. R.A. Huggins (Palo Alto, CA: Annual Review Inc., 1977), p. 449.
- J. Stringer, Materials Sci. Techn., 3 (1987), p. 482.
- F.S. Pettit and C.S. Giggins, “Hot Corrosion,” Superalloys II, ed. C.T. Sims, N.S. Stoloff, and W.C. Hagel (New York: Wiley Publ., 1987), p. 327.
- R.A. Rapp, Corrosion, 42 (1986), p. 568.
- C.O. Park and R.A. Rapp, J. Electrochem. Soc., 133 (1986), p. 1636.
- D. Inman and D.M. Wrench, Brit. Corros. J., 1 (1966), p. 246.
- D.A. Shores and R.C. John, J. Appl. Electrochem., 10 (1980), p. 275.
- P.P. Leblanc and R.A. Rapp, J. Electrochem. Soc., 139 (1992), p. L31.
- P.P. Leblanc and R.A. Rapp, J. Electrochem. Soc., 140 (1993), p. L41.
- D.K. Gupta and R.A. Rapp, J. Electrochem. Soc., 127 (1980), p. 2194 and 2656.
- Y.S. Zhang and R.A. Rapp, J. Electrochem. Soc., 132 (1985), p. 734 and 2498.
- Y.S. Zhang, J. Electrochem. Soc., 133 (1986), p. 655.
- P.D. Jose, D.K. Gupta, and R.A. Rapp, J. Electrochem. Soc., 132 (1985), p. 735.
- D.Z. Shi and R.A. Rapp, J. Electrochem. Soc., 133 (1986), p. 849.
- M.L. Deanhardt and K.H. Stern, J. Electrochem. Soc., 128 (1981), p. 2577.
- A.K. Misra, D.P. Whittle, and W.L. Worrell, J. Electrochem. Soc., 129 (1982), p. 1840.
- M.L. Deanhardt and K.H. Stern, J. Electrochem. Soc., 129 (1982), p. 2228.
- N.S. Jacobson and J.L. Smialek, J. Amer. Ceram. Soc., 68 (1985), p. 432.
- N.S. Jacobson, J. Amer. Ceram. Soc., 76 (1993), p. 3.
- Y.S. Hwang and R.A. Rapp,J. Electrochem. Soc., 137 (1990), p. 1276.
- Y.S. Zhang and R.A. Rapp, Corrosion, 43 (1987), p. 348.
- Y.S. Hwang and R.A. Rapp, Corrosion, 45 (1989), p. 933.
- R.A. Rapp and Y.S. Zhang, “Electrochemical Studies of Hot Corrosion of Materials,” Proc Intern. Corr. Conf. (Merida, Mexico: 1993)
- R.L. Jones, D.B. Nordman, and S.T. Gadomski, Met. Trans., 16A (1985), p. 303.
- R.L. Jones, S.R. Jones, and C.E. Williams, J. Electrochem. Soc., 132 (1985), p. 1499.
- R.L. Jones, C.E. Williams, and S.R. Jones, J. Electrochem. Soc., 133 (1986), p. 227.
- R.L. Jones and D. Mess,J. Amer. Ceram. Soc., 75 (1992), p. 1818.
- R.L. Jones, High Temp. Tech., 6 (1988), p. 187.
- M. Seiersten and P. Kofstad, Mater. Sci. Tech., 3 (1987), p. 576.
- A.S. Nagelberg, J. Electrochem. Soc., 132 (1985), p. 2502.
- F. Mansfeld and J.V. Kenkel, Corr. Sci., 16 (1976), p. 111.
- F. Mansfeld and J.V. Kenkel, Corrosion, 33 (1977), p. 238.
- R. Andresen, J. Electrochem. Soc., 126 (1979), p. 328.
- D.A. Shores and W.C. Fang,J. Electrochem. Soc., 128 (1981), p. 346.
- W.C. Fang and R.A. Rapp,J. Electrochem. Soc., 130 (1983), p. 2335.
- H. Numata, A. Nishikata, and S. Haruyama, Proc. JIMIS-3, Trans. Japan Inst. Suppl. (1983), p. 303.
- X. Zheng and R.A. Rapp,J. Electrochem. Soc., 140 (1993), p. 2857.
- H. Numata and S. Haruyama, Corrosion, 44 (1988), p. 7249.
- J. Kupper and R.A. Rapp, Werkstoffe und Korrosion, 38 (1987), p. 674.
- J.C. Nava, D.Z. Shi, and R.A. Rapp, “Electrochemical Reactions of NaVO3 and Na2CO4 Solutes in Na2SO4,” High Temperature Materials Chemistry IV (Pennington, NJ: Electrochem. Soc., 1987), p. 1.
- D.Z. Shi and R.A. Rapp, Werkstoffe und Korrosion, 41 (1990), p. 215.
- D.A. Shores, Corrosion, 31 (1975), p. 434.
- A. Rahmel, M. Schmidt, and M. Schorr, Oxid. Metals, 18 (1982), p. 195.
- W.T. Wu, A. Rahmel, Oxid. Metals, 19 (1983), p. 201.
- W.T. Wu, A. Rahmel, and M. Schorr, Oxid. Metals, 22 (1984), p. 59.
- W.T. Wu, J. Zhang, and Y. Niu, Proc 11th Intern. Cong. Mater. Corr. (Florence, Italy, April 2–6,1990), p. 1475.
- N. Otsuka and R.A. Rapp, J. Electrochem. Soc., 137 (1990), p. 46.
- Y.M. Wu and R.A. Rapp, J. Electrochem. Soc., 138 (1991), p. 2683.
- G.C. Fryburg et al., J. Electrochem. Soc., 129 (1982), p. 571.
- G.C. Fryburg, F.J. Kohl, and C.A. Stearns, J. Electrochem. Soc., 131 (1984), p. 2985.
- K.L. Luthra and D.A. Shores, J. Electrochem. Soc., 127 (1980), p. 2202.
- K.L. Luthra, High Temperature Corrosion, NACE-6, ed. R.A. Rapp (Houston, TX: NACE, 1983), p. 507.
- K.L. Luthra, Met. Trans., 13A (1982), pp. 1647,1843, and 1853.
- K.L. Luthra and J.H. Wood, Thin Solid Films, 119 (1984), p. 271.
- Y.S. Zhang, L.Q. Shi, and S.T. Shih,J. Chin. Soc. Corr. Protec., 12 (1992), p. 189.
- Y.S. Zhang, X.M. Li, L.Q. Shi, and S.T. Shih, J. Chin. Soc. Corr. Protec, 11 (1991), p. 17.
- L.Q. Shi, Y.S. Zhang, and S.T. Shih, Corr. Sci., 33 (1992), p. 1427.
- L.Q. Shi, Y.S. Zhang, and S.T. Shih, Oxid. Metals, 38 (1992), p. 385.
- Y.S. Zhang, X.M. Li, T.L. Cao, and S.T. Shih, Corr. Sci. Protec Tech., 4 (1992), p. 9.
Cited by
Items 201–252 of 252
Kalsi, S. S. (2013) · i-manager’s Journal on Future Engineering and Technology · doi:10.26634/jfet.9.1.2479 · Cited by 1
Characterization Of Nicraiy Coatings On Ni- And Fe-Based Superalloys By The Coldspray Process
Kalsi, S. S. (2013) · i-manager s Journal on Material Science · doi:10.26634/jms.1.2.2453 · Cited by 1
Decomposition process of Sm2Zr2O7+8YSZ composite TBC systems in conditions of hot corrosion
Moskal, G. (2019) · OCHRONA PRZED KOROZJĄ · doi:10.15199/40.2019.10.2 · Cited by 1
Evaluating the Hot Corrosion Effects of High Temperature Coatings for Marine Gas Turbines
Shifler, D. A., Russom, D. M., & Rodman, B. E. (2005) · NACE CORROSION Conference · doi:10.5006/c2005-05425 · Cited by 1
Wang, Y., Liu, H., Luo, Z., Sun, L., Zhumaev, A. A., Liu, T., Mansurov, Y. N., Zheng, K., & Yin, F. (2025) · Materials Characterization · doi:10.1016/j.matchar.2025.115154 · Cited by 2
Hot Corrosion Resistance and Thermal Stability of High Chromium-Nickel Alloys
Shifler, D. A., & Kohler, L. K. (2000) · NACE CORROSION Conference · doi:10.5006/c2000-00242 · Cited by 1
Evaluating the Hot Corrosion Resistance of High-Temperature Coatings
Shifler, D. A. (2003) · NACE CORROSION Conference · doi:10.5006/c2003-03353 · Cited by 1
Rizvi, T.-E.-A. (2014) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York) · Cited by 1
The Effects of Fuel Dye on the Hot Corrosion Resistance of Marine Gas Turbine Materials
Shifler, D. A. (2001) · NACE CORROSION Conference · doi:10.5006/c2001-01167 · Cited by 1
Effects of Fuel Quality on the Hot Corrosion Resistance of Materials in Marine Gas Turbines
Shifler, D. A. (2000) · NACE CORROSION Conference · doi:10.5006/c2000-00243
Zahrani, E. M., & Alfantazi, A. M. (2011) · Wiley eBooks · doi:10.1002/9781118062142.ch88
Ouyang, J., Li, S., Liu, Z., & Zhou, Y. (2011) · Ceramic engineering and science proceedings · doi:10.1002/9781118095232.ch10
Tristancho, J. L., Vásquez, C., & Ballesteros, D. Y. P. (2007) · DYNA
Peña, B. D. Y., Anaya, A., & Tristancho, R. J. L. (2007) · Scientia et technica · doi:10.22517/23447214.4963
Effect of Nanocrystallization on Hot Corrosion Behavior of K38G Alloy with Sulfate Deposit at 900°C
Geng, S. J., Zhu, S. L., Wang, F. H., & Wu, W. T. (2004) · Materials science forum · doi:10.4028/www.scientific.net/msf.461-464.153
Nickel Base Material Options for Fabrication of Advanced Coal Fired Boiler Components
Baker, B., Smith, G. D., & Hazeldine, P. (2009) · NACE CORROSION Conference · doi:10.5006/c2009-09268
Hafeez, S. B., Senthil, K. S., Yeshwanth, B. K., Arivazhagan, N., Ramkumar, K. D., & Narayanan, S. (2012) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.185.84
Shifler, D. A., Russom, D. M., & Rodman, B. E. (2009) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2009-59116
Sidhu, B. S., & Prakash, S. (2006) · CORROSION · doi:10.5006/1.3279912
Measurements of the Solubility of Fe2O3 and Cr2O3 in Fused Na2O-B2O3 Salts at 1173 K
Toki, R., Doi, T., & Ōtsuka, N. (2014) · Journal of the Japan Institute of Metals and Materials · doi:10.2320/jinstmet.jaw201402
Densification of zirconia-based anti-corrosion coatings for application in waste-to-energy plants
Müller, D. (2017) · Electronic Theses of LMU Munich (Ludwig-Maximilians-Universität München) · doi:10.5282/edoc.20584
Laser cladding of Co-based alloy on 2Cr13 stainless steel
Zhang, S., Man, H. C., Weitao, W., & Wang, M. (2000) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5059464
Mainier, F. B., & de Oliveira, A. S. (2019) · International Journal of Advanced Engineering Research and Science · doi:10.22161/ijaers.6.1.20
High-temperature Corrosion, Fundamentals of
Rapp, R. A. (2001) · Elsevier eBooks · doi:10.1016/b0-08-043152-6/00676-8
Self-citationCorrosion Performance of Additively Manufactured Alloys and Hot Corrosion
Ettefagh, A. H. (2021) · Louisiana State University · doi:10.31390/gradschool_dissertations.5452 · Cited by 4
(2011) · CRC Press eBooks · doi:10.1201/b10611-3
IMPERMEABLE THIN Al2O3 OVERLAY FOR TBC PROTECTION FROM SULFATE AND VANADATE ATTACK IN GAS TURBINES
Mao, S. X. (2003) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/821290
High Temperature Corrosion in Marine Environments
Shifler, D. A. (2022) · Wiley eBooks · doi:10.1002/9781119788867.ch12
Low-Temperature Hot Corrosion of Boilers in the Coal-Fired Power Plant
Gavrilev, A. (2022) · The Research Repository @ WVU (West Virginia University) · doi:10.33915/etd.11458
Phase transition study of Al-Si Co-deposited martensitic steelPreprint
Anwer, Z., Riaz, M., Bhatti, M. I., Bhatti, J., & Shaikh, S. (2023) · Research Square · doi:10.21203/rs.3.rs-3236567/v1
Milles, H., Snani, L., Oulabbas, A., & Toualbia, K. (2024) · Journal of Metals Materials and Minerals · doi:10.55713/jmmm.v34i1.1777
“Sodium sulfate has been confirmed as the main chemical reagent involved in hot corrosion, due to its exceptional stability over a wide range of temperatures and oxygen partial pressures [23 - 25].”
BackgroundHot Corrosion in a Temperature Gradient
Holcomb, G. R. (1999) · NACE CORROSION Conference · doi:10.5006/c1999-99058
Mudgal, D., Gupta, P., Ahuja, L., Singh, A., Mittal, S., Sharma, V., & Pandey, G. (2025) · Industrial Lubrication and Tribology · doi:10.1108/ilt-05-2025-0196
Anwer, Z., Chandio, A. D., Bhatti, M. K., Riaz, M. F., & Bhatti, J. (2025) · Materials and Corrosion · doi:10.1002/maco.70100 · Cited by 1
“At high temperature, the protective Cr 2 O 3 layer was compete by the Cl‐ ions in the molten salt, which is hazardous for Cr 2 O 3 [42].”
Hot corrosion behavior of aluminide coating on K6509 superalloy in various mixed salt environments
Xie, C., Ma, K., Xuxian, Z., Jin, Y., Li, Y., & Li, Y. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.186801
Effect of Hf Element on the Hot Salt Corrosion Resistance of NiCoCrAlY CoatingsPreprint
Guo, H., Ouyang, P., Xiao, F., Zheng, Z., Yue, F., Han, Y., & Zhang, S. B. (2026) · Research Square · doi:10.21203/rs.3.rs-8783198/v1
Jaimes-Campos, A. G., & Mogollón-Sanabria, A. X. (2017) · Universidad Industrial de Santander
Schaal, E. (2015) · theses.fr (ABES) · doi:10.70675/eb0f22d8zfdebz42ebza65cz8656afec78d8
Ougier, M. (2019) · theses.fr (ABES) · doi:10.70675/5fc9ebf5z3e2bz43f5zbfe4za3cd5aa74a19
“Cette capacité d’autocicatrisation des phases MAX est connue et a déjà fait l’objet de nombreuses études [29, 30], en particulier Cr2AlC [19, 31].”
BackgroundInfluentialÉtude de l'oxydation et de la corrosion à haute température d'alliages base nickel polycristallins
Malacarne, R. (2021) · theses.fr (ABES) · doi:10.70675/ec0b580ez137bz46ebz92c9zc5aafb7c3e00 · Cited by 6
Chmakoff, A. (2023) · theses.fr (ABES) · doi:10.70675/f839c89dz1e15z4a60z903az32b54c44749d · Cited by 8
González-Hernández, A. G. (2014) · theses.fr (ABES) · doi:10.70675/30b3b037z1807z46fbzb059zec344457ff0a
Deng, P., Gao, J., Yin, B., Liu, M., Deng, C., & Zhang, L. (2026) · Corrosion Science · doi:10.1016/j.corsci.2026.113870
Effect of salt coating methods on the high temperature chlorination behaviour of superalloy IN718
Tiwari, S., Mahobia, G. S., Kumar, S., & Kumar, S. (2026) · Canadian Metallurgical Quarterly · doi:10.1080/00084433.2026.2673750
Zhang, H. M., Yuan, J., Zan, C., Chen, J., & Zhao, F. (2026) · Intermetallics · doi:10.1016/j.intermet.2026.109419
Gill, A., Chawla, V., Handa, A., & Kumar, S. (2026) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2026.101009
Hot corrosion anisotropy in La-modified CMSX-4 superalloys
Fan, J., Yue-lin, S. O. N. G., Jia-yu, L. I., Dian, J. I. A. O., Zhi-ying, Z. H. U., Xiao, M. A., Rui-hao, Y. U. A. N., Jian-bo, Y. U., Jun, W. A. N. G., Hong-chao, K., et al. (2026) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(26)67120-8
Yin, S., Zou, Y., Hong, S., Jing, Z., & Cheng, J. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.110994
Okonkwo, B. O., Njoku, C. N., Etim, I. N., Awonusi, B., Uzoma, P. C., Njoku, D., Sharafadeen, K., Ikeuba, A. I., Ekerenam, O. O., Emori, W., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7615992
Mishra, L. K., Tripathi, S., Dewangan, S. K., Tiwari, A., Kumar, V., & Paliwal, H. K. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.10.266
Gupta, V., Srivastava, A., Dwivedi, A., Singh, P., Alam, T., Asthana, N., & Singh, L. (2026) · High Temperature Corrosion of Materials · doi:10.1007/s11085-026-10474-3
Metadata
- Authors
- Rapp, R. A., & Zhang, Y.-S.
- Affiliations
- The Ohio State University (US)
- Venue
- JOM
- Published
- 1994-12
- Volume
- 46
- Issue
- 12
- Pages
- 47-55
- ISSN
- 0148-6608 (ISSN-L)
- 1047-4838
- 1543-1851
- OpenAlex
- W2324760338
- Cited by
- 247
- References
- 31
- Citations by year
- 2026: 17 · 2025: 13 · 2024: 9 · 2023: 11 · 2022: 12 · 2021: 16 · 2020: 15 · 2019: 14 · 2018: 11 · 2017: 13 · 2016: 11 · 2015: 9 · 2014: 10 · 2013: 11 · 2012: 6
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- JOM (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- Keywords
- hot corrosion, sodium sulfate, electrochemical corrosion mechanism, sodium metavanadate, electrochemical polarization, corrosion kinetics, alloy corrosion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.