The DOI matches its Crossref record; 347 of the 347 references it cites were found in a registry or an index.
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Open accessAbstract
As an emerging technology in the era of Industry 4.0, digital twin is gaining unprecedented attention because of its promise to further optimize process design, quality control, health monitoring, decision and policy making, and more, by comprehensively modeling the physical world as a group of interconnected digital models. In a two-part series of papers, we examine the fundamental role of different modeling techniques, twinning enabling technologies, and uncertainty quantification and optimization methods commonly used in digital twins. This first paper presents a thorough literature review of digital twin trends across many disciplines currently pursuing this area of research. Then, digital twin modeling and twinning enabling technologies are further analyzed by classifying them into two main categories: physical-to-virtual, and virtual-to-physical, based on the direction in which data flows. Finally, this paper provides perspectives on the trajectory of digital twin technology over the next decade, and introduces a few emerging areas of research which will likely be of great use in future digital twin research. In part two of this review, the role of uncertainty quantification and optimization are discussed, a battery digital twin is demonstrated, and more perspectives on the future of digital twin are shared. Code and preprocessed data for generating all the results and figures presented in the battery digital twin case study in part 2 of this review are available on Github.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–347 of 347
Parameter Estimation and Capacity Fade Analysis of Lithium-Ion Batteries Using Reformulated Models
Ramadesigan, V., Chen, K., Burns, N. A., Boovaragavan, V., Braatz, R. D., & Subramanian, V. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3609926 · Cited by 216
Electrode ageing estimation and open circuit voltage reconstruction for lithium ion batteries
Tian, J., Xiong, R., Shen, W., & Sun, F. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.02.018 · Cited by 216
Deep Learning-Based Partial Domain Adaptation Method on Intelligent Machinery Fault Diagnostics
Li, X., & Zhang, W. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2984968 · Cited by 215
Design and implementation of a smart infrastructure digital twin
Gürdür Broo, D., Bravo-Haro, M., & Schooling, J. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104171 · Cited by 205
A digital twin-enhanced system for engineering product family design and optimization
Lim, K. Y. H., Zheng, P., Chen, C.-H., & Huang, L. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.011 · Cited by 202
Physics-Based Convolutional Neural Network for Fault Diagnosis of Rolling Element Bearings
Sadoughi, M., & Hu, C. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2898634 · Cited by 198
Self-citationBayesian neural networks for flight trajectory prediction and safety assessment
Zhang, X., & Mahadevan, S. (2020) · Decision Support Systems · doi:10.1016/j.dss.2020.113246 · Cited by 195
Self-citationMachine learning for combinatorial optimization: A methodological tour d'horizon
Bengio, Y., Lodi, A., & Prouvost, A. (2021) · European Journal of Operational Research · doi:10.1016/j.ejor.2020.07.063 · Cited by 195
Data-driven digital twin technology for optimized control in process systems
He, R., Chen, G., Dong, C., Sun, S., & Shen, X. (2019) · ISA Transactions · doi:10.1016/j.isatra.2019.05.011 · Cited by 194
System identification in structural engineering
Sirca, G. F., & Adeli, H. (2012) · Scientia Iranica · doi:10.1016/j.scient.2012.09.002 · Cited by 190
Digitalization of Battery Manufacturing: Current Status, Challenges, and Opportunities
Ayerbe, E., Berecibar, M., Clark, S., Franco, A. A., & Ruhland, J. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102696 · Cited by 190
A training-integrity privacy-preserving federated learning scheme with trusted execution environment
Chen, Y., Luo, F., Li, T., Xiang, T., Liu, Z., & Li, J. (2020) · Information Sciences · doi:10.1016/j.ins.2020.02.037 · Cited by 188
Chai, Z., & Zhao, C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2915559 · Cited by 184
Hu, C., & Youn, B. D. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0568-9 · Cited by 183
Self-citationA robot arm digital twin utilising reinforcement learning
Matulis, M., & Harvey, C. (2021) · Computers & Graphics · doi:10.1016/j.cag.2021.01.011 · Cited by 183
Transfer Learning with Deep Recurrent Neural Networks for Remaining Useful Life Estimation
Zhang, A., Wang, H., Li, S., Cui, Y., Liu, Z., Yang, G., & Hu, J. (2018) · Applied Sciences · doi:10.3390/app8122416 · Cited by 181
Digital Twin Research in the AECO-FM Industry
Ozturk, G. B. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102730 · Cited by 180
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2023) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03410-x · Cited by 175
Self-citationA knowledge-based Digital Shadow for machining industry in a Digital Twin perspective
Ladj, A., Wang, Z., Meski, O., Belkadi, F., Ritou, M., & Da Cunha, C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.018 · Cited by 171
Learning nonlinear state–space models using autoencoders
Masti, D., & Bemporad, A. (2021) · Automatica · doi:10.1016/j.automatica.2021.109666 · Cited by 169
A Digital Twin approach based on nonparametric Bayesian network for complex system health monitoring
Yu, J., Song, Y., Tang, D., & Dai, J. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.005 · Cited by 168
Digital Twin-driven machining process for thin-walled part manufacturing
Zhu, Z., Xi, X., Xu, X. W., & Cai, Y. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.03.015 · Cited by 167
Peng, W., Li, Y.-F., Yang, Y.-J., Zhu, S.-P., & Huang, H.-Z. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2015.2513038 · Cited by 166
Modeling and implementation of a digital twin of material flows based on physics simulation
Glatt, M., Sinnwell, C., Yi, L., Donohoe, S., Ravani, B., & Aurich, J. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.015 · Cited by 164
Digital Twin for Human-Robot Interactive Welding and Welder Behavior Analysis
Wang, Q., Jiao, W., Wang, P., & Zhang, Y. (2021) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2020.1003518 · Cited by 164
Building a right digital twin with model engineering
Zhang, L., Zhou, L., & Horn, B. K. P. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.02.009 · Cited by 164
Model predictive controllers: A critical synthesis of theory and industrial needs
Nikolaou, M. (2001) · Advances in chemical engineering · doi:10.1016/s0065-2377(01)26003-7 · Cited by 163
Universal Digital Twin - A Dynamic Knowledge Graph
Akroyd, J., Mosbach, S., Bhave, A., & Kraft, M. (2021) · Data-Centric Engineering · doi:10.1017/dce.2021.10 · Cited by 162
Genetic Algorithm-Based Trajectory Optimization for Digital Twin Robots
Liu, X., Jiang, D., Tao, B., Jiang, G., Sun, Y., Kong, J., Tong, X., Zhao, G., & Chen, B. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.793782 · Cited by 160
Li, X., We, Z., Ma, H., Luo, Z., & Li, X. (2020) · Neural Networks · doi:10.1016/j.neunet.2020.06.014 · Cited by 157
Coupled simulation of thermally active building systems to support a digital twin
Lydon, G. P., Caranovic, S., Hischier, I., & Schlueter, A. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.07.015 · Cited by 156
Lui, Y. H., Li, M., Downey, A. R. J., Shen, S., Nemani, V. P., Ye, H., VanElzen, C. M., Jain, G., Hu, S., Laflamme, S., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229327 · Cited by 156
Self-citationKohtz, S., Xu, Y., Zheng, Z., & Wang, P. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109002 · Cited by 153
Towards risk-aware artificial intelligence and machine learning systems: An overview
Zhang, X., Chan, F. T. S., Yan, C., & Bose, I. (2022) · Decision Support Systems · doi:10.1016/j.dss.2022.113800 · Cited by 153
Self-citationOh, H., Jung, J. H., Jeon, B., & Youn, B. D. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2752151 · Cited by 152
Self-citationPhysics-based prognostics of lithium-ion battery using non-linear least squares with dynamic bounds
Downey, A. R. J., Lui, Y. H., Hu, C. K., Laflamme, S., & Hu, S. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.09.018 · Cited by 152
Self-citationDigital twin approach for damage-tolerant mission planning under uncertainty
Karve, P., Guo, Y., Kapusuzoglu, B., Mahadevan, S., & Haile, M. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.106766 · Cited by 151
Self-citationDigital twin for the structural health management of reusable spacecraft: A case study
Ye, Y., Yang, Q., Yang, F., Huo, Y., & Meng, S. (2020) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2020.107076 · Cited by 151
Li, Z., Jiang, Y. S., Hu, C. K., & Peng, Z. (2016) · Measurement · doi:10.1016/j.measurement.2016.04.036 · Cited by 150
Self-citationWang, Q., Jiao, W., & Zhang, Y. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.10.002 · Cited by 148
Thelen, A., Lui, Y. H., Shen, S., Laflamme, S., Hu, S., Ye, H., & Hu, C. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.05.047 · Cited by 148
Self-citationRecurrent Neural Network-Based Model Predictive Control for Continuous Pharmaceutical Manufacturing
Wong, W. C., Chee, E., Li, J., & Wang, X. (2018) · Mathematics · doi:10.3390/math6110242 · Cited by 147
Digital twin for cutting tool: Modeling, application and service strategy
Xie, Y., Lian, K., Liu, Q., Zhang, C., & Liu, H. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.007 · Cited by 145
Digital twin-based opti-state control method for a synchronized production operation system
Zhang, K., Qu, T., Zhou, D., Jiang, H., Lin, Y., Li, P., Guo, H., Liu, Y., Li, C., & Huang, G. Q. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101892 · Cited by 141
Digital twin-driven surface roughness prediction and process parameter adaptive optimization
Liu, L., Zhang, X., Wan, X., Zhou, S., & Gao, Z. (2021) · Advanced Engineering Informatics · doi:10.1016/j.aei.2021.101470 · Cited by 141
Self-citationPredictive Manufacturing System - Trends of Next-Generation Production Systems
Lee, J., Lapira, E., Yang, S., & Kao, A. (2013) · IFAC Proceedings Volumes · doi:10.3182/20130522-3-br-4036.00107 · Cited by 140
A multi-scale modeling method for digital twin shop-floor
Zhang, H., Qi, Q., & Tao, F. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.12.011 · Cited by 139
On the requirements of digital twin-driven autonomous maintenance
Khan, S., Farnsworth, M., McWilliam, R. P., & Erkoyuncu, J. A. (2020) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2020.08.003 · Cited by 138
From Synthetic to Real: Unsupervised Domain Adaptation for Animal Pose Estimation
Li, C., & Lee, G. H. (2021) · IEEE Computer Society Conference on Computer Vision and Pattern Recognition/Proceedings - IEEE Computer Society Conference on Computer Vision and Pattern Recognition/Proceedings · doi:10.1109/cvpr46437.2021.00153 · Cited by 136
Support Vector Method for RobustARMA System Identification
Rojo‐Álvarez, J. L., Martínez‐Ramón, M., de Prado‐Cumplido, M., Artés-Rodríguez, A., & Figueiras-Vidal, A. R. (2004) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2003.820084 · Cited by 135
Psarommatis, F. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.03.021 · Cited by 134
A design framework for adaptive digital twins
Erkoyuncu, J. A., del Amo, I. F., Ariansyah, D., Bułka, D., Vrabič, R., & Roy, R. (2020) · CIRP Annals · doi:10.1016/j.cirp.2020.04.086 · Cited by 133
Digital Twin: Applying emulation for machine reconditioning
Ayani, M., Ganebäck, M., & Ng, A. H. C. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.139 · Cited by 127
A Machine Learning-Enhanced Digital Twin Approach for Human-Robot-Collaboration
Dröder, K., Bobka, P., Germann, T., Gabriel, F., & Dietrich, F. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.02.010 · Cited by 127
Wang, Z., Liu, Q., Chen, H., & Chu, X. (2020) · International Journal of Production Research · doi:10.1080/00207543.2020.1808261 · Cited by 126
Deng, K., Sun, Y., Li, S., et al. (2014) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2014.2352280 · Cited by 123
Using augmented reality to build digital twin for reconfigurable additive manufacturing system
Cai, Y., Wang, Y., & Burnett, M. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.005 · Cited by 123
A digital twin-based flexible cellular manufacturing for optimization of air conditioner line
Guo, H., Chen, M., Khalgui, M., Qu, T., Wang, S., & Li, J. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.012 · Cited by 123
Real-Time Adaptive Machine-Learning-Based Predictive Control of Nonlinear Processes
Wu, Z., Rincón, D., & Christofides, P. D. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b03055 · Cited by 119
Barenji, A. V., Liu, X., Guo, H., & Li, Z. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1775297 · Cited by 119
Digital twin based condition monitoring of a knuckle boom crane: An experimental study
Moi, T., Cibicik, A., & Rølvåg, T. (2020) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2020.104517 · Cited by 118
Generating Digital Twin Models using Knowledge Graphs for Industrial Production Lines
Banerjee, A., Dalal, R., Mittal, S., & Joshi, K. P. (2017) · Proceedings of the 2017 ACM on Web Science Conference · doi:10.1145/3091478.3162383 · Cited by 117
Fluid–structure interactions of a parachute crossing the far wake of an aircraft
Tezduyar, T. E., & OSAWA, Y. (2001) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(01)00311-5 · Cited by 117
Structural Health Management of Damaged Aircraft Structures Using Digital Twin Concept
Seshadri, B. R., & Krishnamurthy, T. (2017) · AIAA/AHS Adaptive Structures Conference · doi:10.2514/6.2017-1675 · Cited by 117
Real-time digital twin-based optimization with predictive simulation learning
Goodwin, T., Xu, J., Çelik, N., & Chen, C. (2022) · Journal of Simulation · doi:10.1080/17477778.2022.2046520 · Cited by 117
Tadeja, S., Seshadri, P., & Kristensson, P. O. (2020) · The Aeronautical Journal · doi:10.1017/aer.2020.49 · Cited by 113
Zhou, Y., Xing, T., Song, Y., Li, Y., Zhu, X., Li, G., & Ding, S. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.019 · Cited by 113
Development of a method for ontology-based empirical knowledge representation and reasoning
Chen, Y. (2010) · Decision Support Systems · doi:10.1016/j.dss.2010.02.010 · Cited by 111
Remaining useful life assessment of lithium-ion batteries in implantable medical devices
Hu, C., Ye, H., Jain, G., & Schmidt, C. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.056 · Cited by 110
Self-citationConstruction method of shop-floor digital twin based on MBSE
Liu, J., Liu, J., Zhuang, C., Liu, Z., & Miao, T. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.004 · Cited by 109
Bangalore, P., & Patriksson, M. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.08.073 · Cited by 108
Support Vector Machines for Nonlinear Kernel ARMA System Identification
Martínez‐Ramón, M., Rojo‐Álvarez, J. L., Camps‐Valls, G., Muñoz-Marí, J., Navia-Vázquez, A., Soria‐Olivas, E., & Figueiras-Vidal, A. R. (2006) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2006.879767 · Cited by 106
Intelligent scheduling of a feature-process-machine tool supernetwork based on digital twin workshop
Liu, Z., Chen, W., Zhang, C., Yang, C., & Cheng, Q. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.016 · Cited by 106
Zhang, P., & Yin, Z. (2021) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2021.113858 · Cited by 106
An age- and state-dependent Markov model for degradation processes
Giorgio, M., Guida, M., & Pulcini, G. (2011) · IIE Transactions · doi:10.1080/0740817x.2010.532855 · Cited by 104
Semi-Markov models for degradation-based reliability
Kharoufeh, J. P., Solo, C. J., & Ulukuş, M. Y. (2010) · IIE Transactions · doi:10.1080/07408170903394371 · Cited by 103
Model-Based Design of Complex Aeronautical Systems Through Digital Twin and Thread Concepts
Bachelor, G., Brusa, E. G. M., Ferretto, D., & Mitschke, A. (2019) · IEEE Systems Journal · doi:10.1109/jsyst.2019.2925627 · Cited by 102
Digital Twin for Verification and Validation of Industrial Automation Systems – a Survey
Löcklin, A., Müller, M. S., Jung, T., Jazdi, N., White, D., & Weyrich, M. (2020) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa46521.2020.9212051 · Cited by 102
Internet of Things Ontology for Digital Twin in Cyber Physical Systems
Steinmetz, C., Rettberg, A., Ribeiro, F. G. C., Schroeder, G. N., & Pereira, C. E. (2018) · Brazilian Symposium on Computing System Engineering (SBESC) · doi:10.1109/sbesc.2018.00030 · Cited by 101
Yu, J., Liu, P., & Li, Z. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110077 · Cited by 101
Wang, M., Feng, S., İncecik, A., Królczyk, G., & Li, Z. (2022) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2021.114512 · Cited by 101
Frequency domain versus time domain methods in system identification
Lennart Ljung, A., & Glover, K. (1981) · Automatica · doi:10.1016/0005-1098(81)90085-6 · Cited by 100
Kapusuzoglu, B., & Mahadevan, S. (2020) · JOM · doi:10.1007/s11837-020-04438-4 · Cited by 100
Self-citationReal-time model calibration with deep reinforcement learning
Tian, Y., Chao, M. A., Kulkarni, C. S., Goebel, K., & Fink, O. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108284 · Cited by 100
Self-citationMulti-scale evolution mechanism and knowledge construction of a digital twin mimic model
Liu, S., Lu, Y., Li, J., Song, D., Sun, X., & Bao, J. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102123 · Cited by 95
Self-citationMicro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin
Lohtander, M., Ahonen, N., Lanz, M., Ratava, J., & Kaakkunen, J. J. J. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.06.057 · Cited by 93
Gasper, P. J., Gering, K. L., Dufek, E. J., & Smith, K. A. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abdde1 · Cited by 91
A Physics-informed Neural Network for Wind Turbine Main Bearing Fatigue
Yucesan, Y., & Viana, F. A. C. (2023) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2020.v11i1.2594 · Cited by 89
Russell, M. B., & Wang, P. E. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108709 · Cited by 88
Yucesan, Y. A., & Viana, F. (2022) · Mechanical systems and signal processing · doi:10.1016/j.ymssp.2022.108875 · Cited by 88
Inspection Data to Support a Digital Twin for Geometry Assurance
Wärmefjord, K., Söderberg, R. C., Lindkvist, L., Lindau, B., & Carlson, J. S. (2017) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2017-70398 · Cited by 86
FEA-Net: A physics-guided data-driven model for efficient mechanical response prediction
Yao, H., Gao, Y., & Liu, Y. (2020) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2020.112892 · Cited by 85
Remaining useful life prediction for multi-phase deteriorating process based on Wiener process
Liao, G., Yin, H., Mĭn, C., & Lin, Z. H. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107361 · Cited by 84
Zhang, X., Chan, F. T. S., & Mahadevan, S. (2022) · Knowledge-Based Systems · doi:10.1016/j.knosys.2022.108418 · Cited by 84
Self-citationMachine Learning and Digital Twin Driven Diagnostics and Prognostics of Light‐Emitting Diodes
Ibrahim, M. S., Fan, J., Yung, W. K. C., Prisacaru, A., van Driel, W. D., Fan, X., & Zhang, G. (2020) · Laser & Photonics Review · doi:10.1002/lpor.202000254 · Cited by 82
Digital Twin: Values, Challenges and Enablers
Rasheed, A., San, O., & Kvamsdal, T. (2019) · arXiv · doi:10.48550/arxiv.1910.01719 · Cited by 81
Allu, S., Kalnaus, S., Elwasif, W. R., Simunovic, S., Turner, J., & Pannala, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.040 · Cited by 81
Modular Fault Ascription and Corrective Maintenance Using a Digital Twin
Vathoopan, M., Johny, M., Zoitl, A., & Knoll, A. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.470 · Cited by 81
Digital twin for propulsion drive of autonomous electric vehicle
Rassõlkin, A., Vaimann, T., Kallaste, A., & Kuts, V. (2019) · IEEE International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON) · doi:10.1109/rtucon48111.2019.8982326 · Cited by 81
Embedding data analytics and CFD into the digital twin concept
Molinaro, R., Singh, J.-S., Catsoulis, S., Narayanan, C., & Lakehal, D. (2020) · Computers & Fluids · doi:10.1016/j.compfluid.2020.104759 · Cited by 79
Electrochemical Model-Based Fast Charging: Physical Constraint-Triggered PI Control
Li, Y., Vilathgamuwa, D. M., Wikner, E., Wei, Z., Zhang, X., Thiringer, T., Wik, T., & Zou, C. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2021.3065983 · Cited by 78
Self-citationLeser, P. E., Warner, J. E., Leser, W. P., Bomarito, G., Newman, J. A., & Hochhalter, J. D. (2020) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2020.106903 · Cited by 77
Im, S.-Y., Lee, J., & Cho, M. (2021) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2021.114030 · Cited by 77
Ma, C., Gui, H., & Liu, J. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-021-01821-z · Cited by 77
Creation of helicopter dynamic systems digital twin using multibody simulations
Guivarch, D., Mermoz, E., Mariño, Y. A., & Sartor, M. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.04.041 · Cited by 75
Model-Based Fault Diagnosis of a Planetary Gear: A Novel Approach Using Transmission Error
Park, J., Ha, J. M., Oh, H., Youn, B. D., Choi, J.-H., & Kim, N. H. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2016.2590997 · Cited by 74
Self-citationZohdi, T. I. (2020) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2020.112907 · Cited by 73
Wu, Z., Yu, S., Zhu, X., Ji, Y., & PECHT, M. G. (2019) · IEEE Access · doi:10.1109/access.2019.2943076 · Cited by 72
Surrogate Modeling of Nonlinear Dynamic Systems: A Comparative Study
Zhao, Y., Jiang, C., Vega, M. A., Todd, M. D., & Hu, Z. Y. (2022) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4054039 · Cited by 71
Self-citationDiagnosis and Prognosis of Degradation Process via Hidden Semi-Markov Model
Liu, T., Zhu, K., & Zeng, L. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2018.2823320 · Cited by 70
Missing-Class-Robust Domain Adaptation by Unilateral Alignment
Wang, Q., Michau, G., & Fink, O. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2962438 · Cited by 70
Self-citationProbabilistic methods for risk assessment of airframe digital twin structures
Millwater, H. R., Ocampo, J., & Crosby, N. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.106674 · Cited by 69
A Markov chains prognostics framework for complex degradation processes
Chiachío, J., Jalón, M. L., Chiachío, M., & Kolios, A. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2019.106621 · Cited by 68
Real-Time Prediction of Probabilistic Crack Growth with a Helicopter Component Digital Twin
Zhou, X., He, S., Dong, L., & Atluri, S. N. (2022) · AIAA Journal · doi:10.2514/1.j060890 · Cited by 67
Ward, R. M., Choudhary, R., Gregory, A., Jans-Singh, M., & Girolami, M. (2021) · Data-Centric Engineering · doi:10.1017/dce.2021.12 · Cited by 65
Learning optimization proxies for large-scale Security-Constrained Economic Dispatch
Chen, W., Park, S., Tanneau, M., & Hentenryck, P. V. (2022) · Electric Power Systems Research · doi:10.1016/j.epsr.2022.108566 · Cited by 65
Hu, W., He, Y., Liu, Z., Tan, J., Yang, M. Y., & Chen, J.-C. (2020) · Journal of Mechanical Design · doi:10.1115/1.4048414 · Cited by 63
Nemani, V. P., Lü, H., Thelen, A., Hu, C. K., & Zimmerman, A. T. (2021) · Neurocomputing · doi:10.1016/j.neucom.2021.12.035 · Cited by 63
Self-citationZhou, T., Zhang, X., Droguett, E. L., & Mosleh, A. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108835 · Cited by 62
Self-citationA digital twin framework for the simulation and optimization of production systems
Ricondo, I., Porto, A., & Ugarte, M. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.11.128 · Cited by 61
Worden, K., Becker, W. E., Rogers, T. J., & Cross, E. J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.09.032 · Cited by 59
The digital twin of the quality monitoring and control in the series solar cell production line
Pei, F., Tong, Y., Yuan, M., Ding, K., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.02.001 · Cited by 59
Controlled generation of unseen faults for Partial and Open-Partial domain adaptation
Rombach, K., Michau, G., & Fink, O. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108857 · Cited by 58
Self-citationBuilding blocks for digital twin of reconfigurable machine tools from design perspective
Huang, S., Wang, G., & Yan, Y. (2020) · International Journal of Production Research · doi:10.1080/00207543.2020.1847340 · Cited by 57
Zambal, S., Eitzinger, C., Clarke, M., Klintworth, J., & Mechin, P.-Y. (2018) · 2018 IEEE 16th International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2018.8472014 · Cited by 56
Kim, Y., Na, K., & Youn, B. D. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108575 · Cited by 54
Self-citationA Digital Twin for Human-Robot Interaction
Pairet, È., Ardón, P., Liu, X.-K., Lopes, J., Hastie, H., & Lohan, K. (2019) · IEEE/ACM International Conference on Human-Robot Interaction · doi:10.1109/hri.2019.8673015 · Cited by 52
Technical note: Deep learning for creating surrogate models of precipitation in Earth system models
Weber, T., Corotan, A., Hutchinson, B., Kravitz, B., & Link, R. (2020) · Atmospheric chemistry and physics · doi:10.5194/acp-20-2303-2020 · Cited by 51
Huang, X., Xie, T., Wang, Z., Chen, L., Zhou, Q., & Hu, Z. Y. (2021) · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B Mechanical Engineering · doi:10.1115/1.4051749 · Cited by 50
Self-citationMachine Learning for Optimal Power Flows
Hentenryck, P. V. (2021) · doi:10.1287/educ.2021.0234 · Cited by 50
Pre- and Post-identification Merging for Multi-Setup OMA with Covariance-Driven SSI
Döhler, M., Reynders, E. P. B., Magalhães, F., Mevel, L., Roeck, G. D., & Cunha, Á. A. M. F. (2011) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-1-4419-9825-5_7 · Cited by 43
Domain Adaptation Digital Twin for Rolling Element Bearing Prognostics
Liu, C., Mauricio, A., Qi, J., Peng, D., & Gryllias, K. (2020) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2020.v12i1.1294 · Cited by 42
Case study for design optimization using the digital twin approach
Bellalouna, F. (2021) · Procedia CIRP · doi:10.1016/j.procir.2021.05.129 · Cited by 39
Hu, W., Wang, C., Liu, F., et al. (2022) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102371 · Cited by 39
A Deep-Learning-Based Surrogate Model for Thermal Signature Prediction in Laser Metal Deposition
Guo, S., Guo, W., Bian, L., & Guo, Y. B. (2022) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2022.3158204 · Cited by 34
Semi-Markov Model for the Oxidation Degradation Mechanism in Gas Turbine Nozzles
Compare, M., Martini, F., Mattafirri, S., et al. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2015.2506610 · Cited by 32
A prescriptive Dirichlet power allocation policy with deep reinforcement learning
Tian, Y., Han, M., Kulkarni, C. S., & Fink, O. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108529 · Cited by 28
Self-citationHybrid support vector machine and ARIMA model in building cooling prediction
Li, X., Ding, L., Yuyuan, D., & Li, L. (2010) · International Symposium on Computer, Communication, Control and Automation (3CA) · doi:10.1109/3ca.2010.5533864 · Cited by 27
Vega, M. A., Hu, Z. Y., Fillmore, T. B., Smith, M. D., & Todd, M. D. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107561 · Cited by 26
Self-citationHu, W., Shao, J., Jiao, Q., Wang, C., Cheng, J., Liu, Z., & Tan, J. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-01971-8 · Cited by 24
Robust identification of non-linear dynamic systems using support vector machine
Zhang, H., Wang, X., Zhang, C., & Cai, X. (2006) · IEE Proceedings - Science Measurement and Technology · doi:10.1049/ip-smt:20050004 · Cited by 23
Li, S., & Yang, Y. (2021) · Nonlinear Dynamics · doi:10.1007/s11071-021-06772-x · Cited by 21
A Survey of Model Predictive Control Development in Automotive Industries
Swief, A., El-Zawawi, A., & El-Habrouk, M. (2019) · International Conference on Applied Automation and Industrial Diagnostics (ICAAID) · doi:10.1109/icaaid.2019.8934974 · Cited by 17
Method for estimating capacity and predicting remaining useful life of lithium-ion battery
Hu, C. K., Jain, G., Tamirisa, P. A., & Gorka, T. (2014) · International Conference on Prognostics and Health Management (PHM) · doi:10.1109/icphm.2014.7036362 · Cited by 13
Self-citationA Digital-Twin Methodology for the Non-destructive Certification of Lattice Structures
Almalki, A., Downing, D., Lozanovski, B., Tino, R., du Plessis, A., Qian, M., Brandt, M., & Leary, M. (2022) · JOM · doi:10.1007/s11837-021-05144-5 · Cited by 13
Zhang, Y., Wang, S., Sun, G., & Mao, J. (2021) · Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering · doi:10.1177/09544100211027023 · Cited by 12
Hu, Z. Y., & Mourelatos, Z. P. (2018) · Journal of Mechanical Design · doi:10.1115/1.4040626 · Cited by 8
Self-citation
Cited by
Kong, X., & Hucks, R. G. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.104928 · Cited by 125
Metadata
- Authors
- Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z.
- Venue
- Structural and Multidisciplinary Optimization
- Published
- 2022-11-28
- Volume
- 65
- Issue
- 12
- ISSN
- 1615-147X (ISSN-L)
- 1615-1488
- OpenAlex
- W4310155374
- Cited by
- 441
- References
- 347
- FWCI
- 35.63
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.