The DOI matches its Crossref record; 347 of the 347 references it cites were found in a registry or an index.
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Open accessAbstract
As an emerging technology in the era of Industry 4.0, digital twin is gaining unprecedented attention because of its promise to further optimize process design, quality control, health monitoring, decision and policy making, and more, by comprehensively modeling the physical world as a group of interconnected digital models. In a two-part series of papers, we examine the fundamental role of different modeling techniques, twinning enabling technologies, and uncertainty quantification and optimization methods commonly used in digital twins. This first paper presents a thorough literature review of digital twin trends across many disciplines currently pursuing this area of research. Then, digital twin modeling and twinning enabling technologies are further analyzed by classifying them into two main categories: physical-to-virtual, and virtual-to-physical, based on the direction in which data flows. Finally, this paper provides perspectives on the trajectory of digital twin technology over the next decade, and introduces a few emerging areas of research which will likely be of great use in future digital twin research. In part two of this review, the role of uncertainty quantification and optimization are discussed, a battery digital twin is demonstrated, and more perspectives on the future of digital twin are shared. Code and preprocessed data for generating all the results and figures presented in the battery digital twin case study in part 2 of this review are available on Github.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hochreiter, S., & Schmidhuber, J. (1997) · Neural Computation · doi:10.1162/neco.1997.9.8.1735 · Cited by 102,318
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Human-level control through deep reinforcement learning
Mnih, V., Kavukcuoglu, K., Silver, D., Rusu, A. A., Veness, J., Bellemare, M. G., Graves, A., Riedmiller, M., Fidjeland, A. K., Ostrovski, G., et al. (2015) · Nature · doi:10.1038/nature14236 · Cited by 30,357
Raissi, M., Perdikaris, P., & Karniadakis, G. E. (2019) · Journal of Computational Physics · doi:10.1016/j.jcp.2018.10.045 · Cited by 20,384
A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking
Arulampalam, M. S., Maskell, S., Gordon, N., & Clapp, T. (2002) · IEEE Transactions on Signal Processing · doi:10.1109/78.978374 · Cited by 11,502
Physics-informed machine learning
Karniadakis, G. E., Kevrekidis, I. G., Lu, L., Perdikaris, P., Wang, S., & Yang, L. (2021) · Nature Reviews Physics · doi:10.1038/s42254-021-00314-5 · Cited by 8,718
Federated Machine Learning: Concept and Applications
Yang, Q., Liu, Y., Chen, T., & Tong, Y. (2019) · ACM Transactions on Intelligent Systems and Technology · doi:10.1145/3298981 · Cited by 6,322
Federated learning: Challenges, methods, and future directions
Li, T., Sahu, A. K., Talwalkar, A., & Smith, V. (2020) · IEEE Signal Processing Magazine · doi:10.1109/msp.2020.2975749 · Cited by 6,210
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871 · cited 1×
“Qi and Tao are the the most highly-cited researchers in this field at this time (Tao et al., 2018; Qi and Tao, 2018; Tao and Zhang, 2017; Qi et al., 2018).”
BackgroundAdversarial Discriminative Domain Adaptation
Tzeng, E., Hoffman, J., Saenko, K., & Darrell, T. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.316 · Cited by 5,154
Optimal State Estimation: Kalman, H∞, and Nonlinear Approaches
Simon, D. (2006) · doi:10.1002/0470045345 · Cited by 4,875
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
Friedman, N., Geiger, D., & Goldszmidt, M. (1997) · Machine Learning · doi:10.1023/a:1007465528199 · Cited by 4,742
Learning Transferable Features with Deep Adaptation Networks
Long, M., Cao, Y., Wang, J., & Jordan, M. I. (2015) · arXiv · doi:10.48550/arxiv.1502.02791 · Cited by 4,505
Bayesian calibration of computer models
Kennedy, M. C., & O'Hagan, A. (2001) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/1467-9868.00294 · Cited by 4,222
Ljung, L. (1999) · Wiley Encyclopedia of Electrical and Electronics Engineering · doi:10.1002/047134608x.w1046 · Cited by 3,778
Learning Entity and Relation Embeddings for Knowledge Graph Completion
Lin, Y., Liu, Z., Sun, M., Liu, Y., & Zhu, X. (2015) · Proceedings of the AAAI Conference on Artificial Intelligence · doi:10.1609/aaai.v29i1.9491 · Cited by 3,749
Digital Twin in manufacturing: A categorical literature review and classification
Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.474 · Cited by 3,612
The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 3,395 · cited 4×
“Amongst the many definitions of digital twin, the one specified in Glaessgen and Stargel (2012) is considered one of the most broadly accepted definitions, even though the definition may vary from application to application.”
BackgroundMethodInfluentialDigital twin: Enabling technologies, challenges and open research
Fuller, A., Fan, Z., Day, C., & Barlow, C. (2020) · IEEE Access · doi:10.1109/access.2020.2998358 · Cited by 2,965
A Survey on Knowledge Graphs: Representation, Acquisition, and Applications
Ji, S., Pan, S., Cambria, E., Marttinen, P., & Yu, P. S. (2022) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2021.3070843 · Cited by 2,947
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
An eigensystem realization algorithm for modal parameter identification and model reduction
Juang, J.-N., & Pappa, R. S. (1985) · Journal of Guidance, Control, and Dynamics · doi:10.2514/3.20031 · Cited by 2,762
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744
Knowledge Graph Embedding: A Survey of Approaches and Applications
Wang, Q., Mao, Z., Wang, B., & Guo, L. (2017) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2017.2754499 · Cited by 2,654
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
An introduction to structural health monitoring
Farrar, C. R., & Worden, K. (2007) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2006.1928 · Cited by 2,628
Dynamic bayesian networks: representation, inference and learning
Murphy, K. P., & Russell, S. (2002) · Cited by 2,616
DeepXDE: A Deep Learning Library for Solving Differential Equations
Lu, L., Meng, X., Mao, Z., & Karniadakis, G. E. (2021) · SIAM Review · doi:10.1137/19m1274067 · Cited by 2,512
Characterising the Digital Twin: A systematic literature review
Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2020.02.002 · Cited by 2,422 · cited 1×
“Aiming to reduce the risk of diluting the digital twin concept by a large number of definitions, efforts have been made in recent years to consolidate digital twin definitions and terminologies in several review papers (Barricelli et al. 2019; Jones et al. 2020; VanDerHorn and Mahadevan 2021; Liu et al. 2021b).”
BackgroundBox, G. E. P. (1976) · Journal of the American Statistical Association · doi:10.1080/01621459.1976.10480949 · Cited by 2,114
Vibration-based Damage Identification Methods: A Review and Comparative Study
Fan, W., & Qiao, P. (2011) · Structural Health Monitoring · doi:10.1177/1475921710365419 · Cited by 2,045
Digital twin: values, challenges and enablers from a modeling perspective
Rasheed, A., San, O., & Kvamsdal, T. (2020) · IEEE Access · doi:10.1109/access.2020.2970143 · Cited by 1,952
Degradation diagnostics for lithium ion cells
Birkl, C. R., Roberts, M. R., McTurk, E., Bruce, P. G., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.011 · Cited by 1,945 · cited 1×
“In this discipline, a better alternative to the term “fault diagnostics” is “degradation diagnostics”, which identifies and quantifies degradation modes and mechanisms driving cell-level degradation (Birkl et al., 2017).”
BackgroundZhu, L., & Han, S. (2020) · Lecture Notes in Computer Science · doi:10.1007/978-3-030-63076-8_2 · Cited by 1,906
Review of digital twin about concepts, technologies, and industrial applications
Liu, M., Fang, S., Dong, H., & Xu, C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.017 · Cited by 1,875
Modal identification of output-only systems using frequency domain decomposition
Brincker, R., Zhang, L., & Andersen, P. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/3/303 · Cited by 1,825
Bayesian Filtering and Smoothing
Särkkä, S. (2013) · doi:10.1017/cbo9781139344203 · Cited by 1,784
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768 · cited 2×
“Two notable applications of the dual extended Kalman filter are battery state (SOC) and parameter (capacity) estimation Plett (2004) and vehicle state (e.g., longitudinal and lateral velocities) and parameter (e.g., vehicle mass and moments of inertia) estimation Wenzel et al.”
BackgroundRemaining useful life estimation in prognostics using deep convolution neural networks
Li, X., Ding, Q., & Sun, J.-Q. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.11.021 · Cited by 1,755
Digital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison
Qi, Q., & Tao, F. (2018) · IEEE Access · doi:10.1109/access.2018.2793265 · Cited by 1,716
A Tutorial on Learning with Bayesian Networks
Heckerman, D. (2008) · Studies in Computational Intelligence · doi:10.1007/978-3-540-85066-3_3 · Cited by 1,693
Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
Enabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579 · cited 1×
“Five-dimensional digital twin (Qi et al., 2021) State”
A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring
Lynch, J. P. (2006) · The Shock and Vibration Digest · doi:10.1177/0583102406061499 · Cited by 1,533
REFERENCE-BASED STOCHASTIC SUBSPACE IDENTIFICATION FOR OUTPUT-ONLY MODAL ANALYSIS
PEETERS, B., & DE ROECK, G. (1999) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.1999.1249 · Cited by 1,520
Statistics versus machine learning
Bzdok, D., Altman, N., & Krzywinski, M. (2018) · Nature Methods · doi:10.1038/nmeth.4642 · Cited by 1,508
System identification—A survey
Åström, K. J., & Eykhoff, P. (1971) · Automatica · doi:10.1016/0005-1098(71)90059-8 · Cited by 1,495
A survey on digital twin: definitions, characteristics, applications, and design implications
Barricelli, B. R., Casiraghi, E., & Fogli, D. (2019) · IEEE Access · doi:10.1109/access.2019.2953499 · Cited by 1,480
The SSN ontology of the W3C semantic sensor network incubator group
Compton, M., Barnaghi, P., Bermudez, L., García-Castro, R., Corcho, O., Cox, S., Graybeal, J., Hauswirth, M., Henson, C., Herzog, A., et al. (2012) · Journal of Web Semantics · doi:10.1016/j.websem.2012.05.003 · Cited by 1,424
Digital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397
Antoni, J., & Randall, R. B. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.002 · Cited by 1,333
Towards a semantic Construction Digital Twin: Directions for future research
Boje, C., Guerriero, A., Kubicki, S., & Rezgui, Y. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103179 · Cited by 1,324
Hu, X., Xu, L., Lin, X., & Pecht, M. (2020) · Joule · doi:10.1016/j.joule.2019.11.018 · Cited by 1,320
Active Learning with Statistical Models
Cohn, D. A., Ghahramani, Z., & Jordan, M. I. (1996) · Journal of Artificial Intelligence Research · doi:10.1613/jair.295 · Cited by 1,317
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305
A physics-informed deep learning framework for inversion and surrogate modeling in solid mechanics
Haghighat, E., Raissi, M., Moure, A., Gomez, H., & Juanes, R. (2021) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2021.113741 · Cited by 1,305
A recurrent neural network based health indicator for remaining useful life prediction of bearings
Guo, L., Li, N., Jia, F., Lei, Y., & Lin, J. (2017) · Neurocomputing · doi:10.1016/j.neucom.2017.02.045 · Cited by 1,231
Jagtap, A. D., Kharazmi, E., & Karniadakis, G. E. (2020) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2020.113028 · Cited by 1,208
Rotating machinery prognostics: State of the art, challenges and opportunities
Heng, A., Zhang, S., Tan, A. C. C., & Mathew, J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.06.009 · Cited by 1,207
Data-driven health estimation and lifetime prediction of lithium-ion batteries: A review
Li, Y., Liu, K., Foley, A. M., Zülke, A., Berecibar, M., Nanini-Maury, E., Van Mierlo, J., & Hoster, H. E. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109254 · Cited by 1,193
Peng, Z. K., & Chu, F. L. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00075-x · Cited by 1,192
Efficient Global Reliability Analysis for Nonlinear Implicit Performance Functions
Bichon, B. J., Eldred, M., Swiler, L. P., Mahadevan, S., & McFarland, J. M. (2008) · AIAA Journal · doi:10.2514/1.34321 · Cited by 1,183
Self-citationAsymptotic behavior of the extended Kalman filter as a parameter estimator for linear systems
Ljung, L. (1979) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1979.1101943 · Cited by 1,162
Past, present and future of nonlinear system identification in structural dynamics
Kerschen, G., Worden, K., Vakakis, A. F., & Golinval, J.-C. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.04.008 · Cited by 1,141
A review on the application of deep learning in system health management
Khan, S., & Yairi, T. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.024 · Cited by 1,133
Review on model predictive control: an engineering perspective
Schwenzer, M., Ay, M., Bergs, T., & Abel, D. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07682-3 · Cited by 1,132
Adaptive activation functions accelerate convergence in deep and physics-informed neural networks
Jagtap, A. D., Kawaguchi, K., & Karniadakis, G. E. (2020) · Journal of Computational Physics · doi:10.1016/j.jcp.2019.109136 · Cited by 1,127
Critical review of state of health estimation methods of Li-ion batteries for real applications
Berecibar, M., Gandiaga, I., Villarreal, I., Omar, N., Van Mierlo, J., & Van den Bossche, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.042 · Cited by 1,126
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119
He, W., Williard, N., Osterman, M., & Pecht, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.040 · Cited by 1,105
Recent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090
Survey of Multifidelity Methods in Uncertainty Propagation, Inference, and Optimization
Peherstorfer, B., Willcox, K., & Gunzburger, M. (2018) · SIAM Review · doi:10.1137/16m1082469 · Cited by 1,061
Waag, W., Fleischer, C., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.064 · Cited by 1,059
A review: Knowledge reasoning over knowledge graph
Chen, X., Jia, S., & Xiang, Y. (2020) · Expert Systems with Applications · doi:10.1016/j.eswa.2019.112948 · Cited by 1,035
Zhu, Y., Zabaras, N., Koutsourelakis, P.-S., & Perdikaris, P. (2019) · Journal of Computational Physics · doi:10.1016/j.jcp.2019.05.024 · Cited by 1,030
A Hybrid Approach to Privacy-Preserving Federated Learning
Truex, S., Baracaldo, N., Anwar, A., Steinke, T., Ludwig, H., Zhang, R., & Zhou, Y. (2019) · Proceedings of the 12th ACM Workshop on Artificial Intelligence and Security · doi:10.1145/3338501.3357370 · Cited by 1,029
An Overview of Existing Methods and Recent Advances in Sequential Monte Carlo
Cappe, O., Godsill, S. J., & Moulines, E. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.893250 · Cited by 1,009
The Digital Twin: Realizing the Cyber-Physical Production System for Industry 4.0
Uhlemann, T. H.-J., Lehmann, C., & Steinhilper, R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.11.152 · Cited by 994
The ‘Digital Twin’ to enable the vision of precision cardiology
Corral-Acero, J., Margara, F., Marciniak, M., Rodero, C., Loncaric, F., Feng, Y., Gilbert, A., Fernandes, J. F., Bukhari, H. A., Wajdan, A., et al. (2020) · European Heart Journal · doi:10.1093/eurheartj/ehaa159 · Cited by 932
Digital Twin: Generalization, characterization and implementation
VanDerHorn, E., & Mahadevan, S. (2021) · Decision Support Systems · doi:10.1016/j.dss.2021.113524 · Cited by 918
Self-citationDeep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
Review of digital twin applications in manufacturing
Cimino, C., Negri, E., & Fumagalli, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.103130 · Cited by 874
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
Residual-life distributions from component degradation signals: A Bayesian approach
GEBRAEEL, N. Z., LAWLEY, M. A., LI, R., & RYAN, J. K. (2005) · IIE Transactions · doi:10.1080/07408170590929018 · Cited by 788
Learning long-term dependencies in NARX recurrent neural networks
Lin, T., Horne, B. G., Tino, P., & Giles, C. L. (1996) · IEEE Transactions on Neural Networks · doi:10.1109/72.548162 · Cited by 784
A Novel Cloud-Based Framework for the Elderly Healthcare Services Using Digital Twin
Liu, Y., Zhang, L., Yang, Y., Zhou, L., Ren, L., Wang, F., Liu, R., Pang, Z., & Deen, M. J. (2019) · IEEE Access · doi:10.1109/access.2019.2909828 · Cited by 763
Digital Twin for maintenance: A literature review
Errandonea, I., Beltrán, S., & Arrizabalaga, S. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103316 · Cited by 741
Gaussian process regression for forecasting battery state of health
Richardson, R. R., Osborne, M. A., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.004 · Cited by 732
Representation Learning of Knowledge Graphs with Entity Descriptions
Xie, R., Liu, Z., Jia, J., Luan, H., & Sun, M. (2016) · Proceedings of the AAAI Conference on Artificial Intelligence · doi:10.1609/aaai.v30i1.10329 · Cited by 725
Particle filter theory and practice with positioning applications
Gustafsson, F. (2010) · IEEE Aerospace and Electronic Systems Magazine · doi:10.1109/maes.2010.5546308 · Cited by 720
Neural networks for nonlinear dynamic system modelling and identification
CHEN, S., & BILLINGS, S. A. (1992) · International Journal of Control · doi:10.1080/00207179208934317 · Cited by 720
Perspectives on system identification
Ljung, L. (2010) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2009.12.001 · Cited by 707
Lim, K. Y. H., Zheng, P., & Chen, C.-H. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01512-w · Cited by 700
Zhuang, C., Liu, J., & Xiong, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1617-6 · Cited by 693
An Improved Exponential Model for Predicting Remaining Useful Life of Rolling Element Bearings
Li, N., Lei, Y., Lin, J., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2455055 · Cited by 686
Stochastic modelling and analysis of degradation for highly reliable products
Ye, Z., & Xie, M. (2015) · Applied Stochastic Models in Business and Industry · doi:10.1002/asmb.2063 · Cited by 685
Rezvanizaniani, S. M., Liu, Z., Chen, Y., & Lee, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.085 · Cited by 684
Yin, X., Zhu, Y., & Hu, J. (2022) · ACM Computing Surveys · doi:10.1145/3460427 · Cited by 638
Toward a Digital Twin for real-time geometry assurance in individualized production
Söderberg, R., Wärmefjord, K., Carlson, J. S., & Lindkvist, L. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.038 · Cited by 637
Using Simulation and Domain Adaptation to Improve Efficiency of Deep Robotic Grasping
Bousmalis, K., Irpan, A., Wohlhart, P., Bai, Y., Kelcey, M., Kalakrishnan, M., Downs, L., Ibarz, J., Pastor, P., Konolige, K., et al. (2018) · 2018 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2018.8460875 · Cited by 636
Digital twin-based sustainable intelligent manufacturing: a review
He, B., & Bai, K.-J. (2021) · Advances in Manufacturing · doi:10.1007/s40436-020-00302-5 · Cited by 621
Gao, H., Sun, L., & Wang, J.-X. (2021) · Journal of Computational Physics · doi:10.1016/j.jcp.2020.110079 · Cited by 621
An accelerated calendar and cycle life study of Li-ion cells
Bloom, I., Cole, B. W., Sohn, J. J., Jones, S. A., Polzin, E. G., Battaglia, V. S., Henriksen, G. L., Motloch, C., Richardson, R., Unkelhaeuser, T., et al. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00783-2 · Cited by 619
Relational retrieval using a combination of path-constrained random walks
Lao, N., & Cohen, W. W. (2010) · Machine Learning · doi:10.1007/s10994-010-5205-8 · Cited by 614
Mind the Class Weight Bias: Weighted Maximum Mean Discrepancy for Unsupervised Domain Adaptation
Yan, H., Ding, Y., Li, P., Wang, Q., Xu, Y., & Zuo, W. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.107 · Cited by 613
How to tell the difference between a model and a digital twin
Wright, L., & Davidson, S. (2020) · Advanced Modeling and Simulation in Engineering Sciences · doi:10.1186/s40323-020-00147-4 · Cited by 601
An application framework of digital twin and its case study
Zheng, Y., Yang, S., & Cheng, H. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0911-3 · Cited by 593
Li, X., Zhang, W., & Ding, Q. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.11.011 · Cited by 582
Li, W., Rentemeister, M., Badeda, J., Jöst, D., Schulte, D., & Sauer, D. U. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101557 · Cited by 582
Sliced Wasserstein Discrepancy for Unsupervised Domain Adaptation
Lee, C.-Y., Batra, T., Baig, M. H., & Ulbricht, D. (2019) · 2019 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2019.01053 · Cited by 577
Hu, C., Youn, B. D., & Chung, J. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.002 · Cited by 560
Self-citationHaag, S., & Anderl, R. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.02.006 · Cited by 559 · cited 1×
“As an initial digital twin proof of concept, Haag and Anderl (2018) demonstrated simultaneous simulation and measurement of forces in a beam bending test bench.”
MethodGenerative adversarial networks for data augmentation in machine fault diagnosis
Shao, S., Wang, P., & Yan, R. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.01.001 · Cited by 556
Digital Twin for rotating machinery fault diagnosis in smart manufacturing
Wang, J., Ye, L., Gao, R. X., Li, C., & Zhang, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1552032 · Cited by 552
Fink, O., Wang, Q., Svensén, M., Dersin, P., Lee, W.-J., & Ducoffe, M. (2020) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2020.103678 · Cited by 549
Self-citationA digital twin smart city for citizen feedback
White, G., Zink, A., Codecá, L., & Clarke, S. (2021) · Cities · doi:10.1016/j.cities.2020.103064 · Cited by 548
Shen, S., Sadoughi, M., Li, M., Wang, Z., & Hu, C. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114296 · Cited by 537
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Developing a Digital Twin at Building and City Levels: Case Study of West Cambridge Campus
Lu, Q., Parlikad, A. K., Woodall, P., Don Ranasinghe, G., Xie, X., Liang, Z., Konstantinou, E., Heaton, J., & Schooling, J. (2020) · Journal of Management in Engineering · doi:10.1061/(asce)me.1943-5479.0000763 · Cited by 531
Neurocontrol of nonlinear dynamical systems with Kalman filter trained recurrent networks
Puskorius, G. V., & Feldkamp, L. A. (1994) · IEEE Transactions on Neural Networks · doi:10.1109/72.279191 · Cited by 528
Huang, R., Xi, L., Li, X., Liu, C., Qiu, H., & Lee, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.11.008 · Cited by 523
A hybrid predictive maintenance approach for CNC machine tool driven by Digital Twin
Luo, W., Hu, T., Ye, Y., Zhang, C., & Wei, Y. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.101974 · Cited by 519
A review of vibration-based techniques for helicopter transmission diagnostics
Samuel, P. D., & Pines, D. J. (2005) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.02.058 · Cited by 518
A BIM-data mining integrated digital twin framework for advanced project management
Pan, Y., & Zhang, L. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103564 · Cited by 518
A Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning
Xu, Y., Sun, Y., Liu, X., & Zheng, Y. (2019) · IEEE Access · doi:10.1109/access.2018.2890566 · Cited by 509
Mitchell, T., Cohen, W., Hruschka, E., Talukdar, P., Yang, B., Betteridge, J., Carlson, A., Dalvi, B., Gardner, M., Kisiel, B., et al. (2018) · Communications of the ACM · doi:10.1145/3191513 · Cited by 507
Digital twin and its implementations in the civil engineering sector
Jiang, F., Ma, L., Broyd, T., & Chen, K. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103838 · Cited by 500
Digital Twin Service towards Smart Manufacturing
Qi, Q., Tao, F., Zuo, Y., & Zhao, D. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.103 · Cited by 485
Digital twin-enabled anomaly detection for built asset monitoring in operation and maintenance
Lu, Q., Xie, X., Parlikad, A. K., & Schooling, J. M. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103277 · Cited by 481
A Bidirectional LSTM Prognostics Method Under Multiple Operational Conditions
Huang, C.-G., Huang, H.-Z., & Li, Y.-F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2891463 · Cited by 476
On the estimation of state variables and parameters for noisy dynamic systems
Cox, H. (1964) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1964.1105635 · Cited by 475
Digital twin-driven manufacturing cyber-physical system for parallel controlling of smart workshop
Leng, J., Zhang, H., Yan, D., Liu, Q., Chen, X., & Zhang, D. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0881-5 · Cited by 475
A Digital Twin Approach for Fault Diagnosis in Distributed Photovoltaic Systems
Jain, P., Poon, J., Singh, J. P., Spanos, C., Sanders, S. R., & Panda, S. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911594 · Cited by 462
Ding, K., Chan, F. T. S., Zhang, X., Zhou, G., & Zhang, F. (2019) · International Journal of Production Research · doi:10.1080/00207543.2019.1566661 · Cited by 456
Self-citationDigital Twin for Intelligent Context-Aware IoT Healthcare Systems
Elayan, H., Aloqaily, M., & Guizani, M. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3051158 · Cited by 438
Machine Learning based Digital Twin Framework for Production Optimization in Petrochemical Industry
Min, Q., Lu, Y., Liu, Z., Su, C., & Wang, B. (2019) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2019.05.020 · Cited by 436 · cited 2×
“2020), oil refinery management (Min et al. 2019), risk identification, and city planning (Lu et al.”
BackgroundMethodSelf-citationDirect importance estimation for covariate shift adaptation
Sugiyama, M., Suzuki, T., Nakajima, S., Kashima, H., von Bünau, P., & Kawanabe, M. (2008) · Annals of the Institute of Statistical Mathematics · doi:10.1007/s10463-008-0197-x · Cited by 426
Systems Engineering with SysML/UML: Modeling, Analysis, Design
Weilkiens, T. (2007) · Cited by 423
Digital Twin for 5G and Beyond
Nguyen, H. X., Trestian, R., To, D., & Tatipamula, M. (2021) · IEEE Communications Magazine · doi:10.1109/mcom.001.2000343 · Cited by 419
The Digital Twin of the City of Zurich for Urban Planning
Schrotter, G., & Hürzeler, C. (2020) · PFG – Journal of Photogrammetry, Remote Sensing and Geoinformation Science · doi:10.1007/s41064-020-00092-2 · Cited by 415
An Adaptation of the Vector-Space Model for Ontology-Based Information Retrieval
Castells, P., Fernandez, M., & Vallet, D. (2007) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2007.22 · Cited by 412
Dual extended Kalman filter for vehicle state and parameter estimation
Wenzel, T. A., Burnham, K. J., Blundell, M. V., & Williams, R. A. (2006) · Vehicle System Dynamics · doi:10.1080/00423110500385949 · Cited by 406
Xia, K., Sacco, C., Kirkpatrick, M., Saidy, C., Nguyen, L., Kircaliali, A., & Harik, R. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.012 · Cited by 406
Deep learning of vortex-induced vibrations
Raissi, M., Wang, Z., Triantafyllou, M. S., & Karniadakis, G. E. (2019) · Journal of Fluid Mechanics · doi:10.1017/jfm.2018.872 · Cited by 404
A deep-learning-based surrogate model for data assimilation in dynamic subsurface flow problems
Tang, M., Liu, Y., & Durlofsky, L. J. (2020) · Journal of Computational Physics · doi:10.1016/j.jcp.2020.109456 · Cited by 394
Model-Based Systems Engineering: An Emerging Approach for Modern Systems
Ramos, A. L., Ferreira, J. V., & Barcelo, J. (2012) · IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2011.2106495 · Cited by 382
Dynamic Bayesian Network for Aircraft Wing Health Monitoring Digital Twin
Li, C., Mahadevan, S., Ling, Y., Choze, S., & Wang, L. (2017) · AIAA Journal · doi:10.2514/1.j055201 · Cited by 381
Self-citationRemaining useful lifetime prediction via deep domain adaptation
da Costa, P. R. D. O., Akçay, A., Zhang, Y., & Kaymak, U. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2019.106682 · Cited by 381
Intelligent fault diagnosis of machinery using digital twin-assisted deep transfer learning
Xia, M., Shao, H., Williams, D., Lu, S., Shu, L., & de Silva, C. W. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107938 · Cited by 378
Fault diagnosis and remaining useful life estimation of aero engine using LSTM neural network
Yuan, M., Wu, Y., & Lin, L. (2016) · 2016 IEEE International Conference on Aircraft Utility Systems (AUS) · doi:10.1109/aus.2016.7748035 · Cited by 377
Tian, Z. (2009) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-009-0356-9 · Cited by 376
Fusing physics-based and deep learning models for prognostics
Chao, M. A., Kulkarni, C. S., Goebel, K., & Fink, O. (2022) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000506035 · Cited by 369
Self-citationDigital twin, physics-based model, and machine learning applied to damage detection in structures
Ritto, T. G., & Rochinha, F. A. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107614 · Cited by 367
Deep learning of vortex-induced vibrationsPreprint
Raissi, M., Wang, Z., Triantafyllou, M. S., & Karniadakis, G. E. (2019) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 361
Industry-scale knowledge graphs: lessons and challenges
Noy, N., Gao, Y., Jain, A., Narayanan, A., Patterson, A., & Taylor, J. (2019) · Communications of the ACM · doi:10.1145/3331166 · Cited by 360
Wang, D., Miao, Q., & Pecht, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.129 · Cited by 351 · cited 1×
“2012), relevance vector machine (Wang et al. 2013), Gaussian process regression (Richardson et al.”
BackgroundThe role of data fusion in predictive maintenance using digital twin
Liu, Z., Meyendorf, N., & Mrad, N. (2018) · AIP Conference Proceedings · doi:10.1063/1.5031520 · Cited by 350
Digital twin for CNC machine tool: modeling and using strategy
Luo, W., Hu, T., Zhang, C., & Wei, Y. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0946-5 · Cited by 350
A probabilistic graphical model foundation for enabling predictive digital twins at scale
Kapteyn, M. G., Pretorius, J. V. R., & Willcox, K. E. (2021) · Nature Computational Science · doi:10.1038/s43588-021-00069-0 · Cited by 346
Linearly Recurrent Autoencoder Networks for Learning Dynamics
Otto, S. E., & Rowley, C. W. (2019) · SIAM Journal on Applied Dynamical Systems · doi:10.1137/18m1177846 · Cited by 345
Leng, J., Liu, Q., Ye, S., Jing, J., Wang, Y., Zhang, C., Zhang, D., & Chen, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101895 · Cited by 342
Wagg, D. J., Worden, K., Barthorpe, R. J., & Gardner, P. (2020) · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering · doi:10.1115/1.4046739 · Cited by 339
Digital Twin Enhanced Dynamic Job-Shop Scheduling
Zhang, M., Tao, F., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.008 · Cited by 337
Quantification of Model Uncertainty: Calibration, Model Discrepancy, and Identifiability
Arendt, P. D., Apley, D. W., & Chen, W. (2012) · Journal of Mechanical Design · doi:10.1115/1.4007390 · Cited by 332
DeepMPC: Learning Deep Latent Features for Model Predictive Control
Lenz, I., Knepper, R., & Saxena, A. (2015) · Robotics: Science and Systems XI · doi:10.15607/rss.2015.xi.012 · Cited by 332
Adaptive Federated Learning and Digital Twin for Industrial Internet of Things
Sun, W., Lei, S., Wang, L., Liu, Z., & Zhang, Y. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3034674 · Cited by 327
Multivariate process monitoring and fault diagnosis by multi-scale PCA
Misra, M., Yue, H. H., Qin, S. J., & Ling, C. (2002) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00093-5 · Cited by 325
A Deep Learning Model for Smart Manufacturing Using Convolutional LSTM Neural Network Autoencoders
Essien, A., & Giannetti, C. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2967556 · Cited by 318
Fluid–structure interaction modeling of wind turbines: simulating the full machine
Hsu, M.-C., & Bazilevs, Y. (2012) · Computational Mechanics · doi:10.1007/s00466-012-0772-0 · Cited by 317
A Mathematical Introduction to Fluid Mechanics
Chorin, A. J., & Marsden, J. E. (1990) · Texts in Applied Mathematics · doi:10.1007/978-1-4684-0364-0 · Cited by 316
Calibration drift in regression and machine learning models for acute kidney injury
Davis, S. E., Lasko, T. A., Chen, G., Siew, E. D., & Matheny, M. E. (2017) · Journal of the American Medical Informatics Association · doi:10.1093/jamia/ocx030 · Cited by 312
Liu, Q., Leng, J., Yan, D., Zhang, D., Wei, L., Yu, A., Zhao, R., Zhang, H., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.012 · Cited by 312
AutoDIAL: Automatic Domain Alignment Layers
Carlucci, F. M., Porzi, L., Caputo, B., Ricci, E., & Bulo, S. R. (2017) · 2017 IEEE International Conference on Computer Vision (ICCV) · doi:10.1109/iccv.2017.542 · Cited by 311
Shim, C.-S., Dang, N.-S., Lon, S., & Jeon, C.-H. (2019) · Structure and Infrastructure Engineering · doi:10.1080/15732479.2019.1620789 · Cited by 311
A Digital Twin Based Estimation Method for Health Indicators of DC–DC Converters
Peng, Y., Zhao, S., & Wang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3009600 · Cited by 305
Deep Reinforcement Learning for Stochastic Computation Offloading in Digital Twin Networks
Dai, Y., Zhang, K., Maharjan, S., & Zhang, Y. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3016320 · Cited by 296
A physics-informed deep learning approach for bearing fault detection
Shen, S., Lu, H., Sadoughi, M., Hu, C., Nemani, V., Thelen, A., Webster, K., Darr, M., Sidon, J., & Kenny, S. (2021) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2021.104295 · Cited by 293
Self-citationA High Precision Coulometry Study of the SEI Growth in Li/Graphite Cells
Smith, A. J., Burns, J. C., Zhao, X., Xiong, D., & Dahn, J. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3557892 · Cited by 288
TossingBot: Learning to Throw Arbitrary Objects With Residual Physics
Zeng, A., Song, S., Lee, J., Rodriguez, A., & Funkhouser, T. (2020) · IEEE Transactions on Robotics · doi:10.1109/tro.2020.2988642 · Cited by 282
Digital-Twin-Based Job Shop Scheduling Toward Smart Manufacturing
Fang, Y., Peng, C., Lou, P., Zhou, Z., Hu, J., & Yan, J. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2938572 · Cited by 271
Perspective—Combining Physics and Machine Learning to Predict Battery Lifetime
Aykol, M., Gopal, C. B., Anapolsky, A., Herring, P. K., van Vlijmen, B., Berliner, M. D., Bazant, M. Z., Braatz, R. D., Chueh, W. C., & Storey, B. D. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abec55 · Cited by 264
Zhang, Z., Wang, Y., & Wang, K. (2013) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-012-0657-2 · Cited by 254
Yi, Y., Yan, Y., Liu, X., Ni, Z., Feng, J., & Liu, J. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.013 · Cited by 253
Digital Twin-enabled Collaborative Data Management for Metal Additive Manufacturing Systems
Liu, C., Le Roux, L., Körner, C., Tabaste, O., Lacan, F., & Bigot, S. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.05.010 · Cited by 252
Studies on Fluid-Thermal-Structural Coupling for Aerothermoelasticity in Hypersonic Flow
Culler, A. J., & McNamara, J. J. (2010) · AIAA Journal · doi:10.2514/1.j050193 · Cited by 251
Angjeliu, G., Coronelli, D., & Cardani, G. (2020) · Computers & Structures · doi:10.1016/j.compstruc.2020.106282 · Cited by 251
Theoretical prediction of high melting temperature for a Mo–Ru–Ta–W HCP multiprincipal element alloy
Hong, Q.-J., Schroers, J., Hofmann, D., Curtarolo, S., Asta, M., & van de Walle, A. (2021) · npj Computational Materials · doi:10.1038/s41524-020-00473-6 · Cited by 249
Tran, V. T., Thom Pham, H., Yang, B.-S., & Tien Nguyen, T. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.02.015 · Cited by 248
Bzdok, D., Krzywinski, M., & Altman, N. (2017) · Nature Methods · doi:10.1038/nmeth.4526 · Cited by 246
Wei, Z., Quan, Z., Wu, J., Li, Y., Pou, J., & Zhong, H. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3070514 · Cited by 243
A review on degradation models in reliability analysis
Gorjian, N., Ma, L., Mittinty, M., Yarlagadda, P., & Sun, Y. (2010) · Engineering Asset Lifecycle Management · doi:10.1007/978-0-85729-320-6_42 · Cited by 239
Issues in Deciding Whether to Use Multifidelity Surrogates
Fernández-Godino, M. G., Park, C., Kim, N. H., & Haftka, R. T. (2019) · AIAA Journal · doi:10.2514/1.j057750 · Cited by 235
Choi, S. H., Park, K.-B., Roh, D. H., Lee, J. Y., Mohammed, M., Ghasemi, Y., & Jeong, H. (2022) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102258 · Cited by 235
A digital twin-driven approach for the assembly-commissioning of high precision products
Sun, X., Bao, J., Li, J., Zhang, Y., Liu, S., & Zhou, B. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101839 · Cited by 234
Data‐driven physics‐based digital twins via a library of component‐based reduced‐order models
Kapteyn, M. G., Knezevic, D. J., Huynh, D. B. P., Tran, M., & Willcox, K. E. (2022) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.6423 · Cited by 234
Compositional Vector Space Models for Knowledge Base Completion
Neelakantan, A., Roth, B., & McCallum, A. (2015) · Proceedings of the 53rd Annual Meeting of the Association for Computational Linguistics and the 7th International Joint Conference on Natural Language Processing (Volume 1: Long Papers) · doi:10.3115/v1/p15-1016 · Cited by 230
Dual Extended Kalman Filter Methods
Wan, E. A., & Nelson, A. T. (2001) · Kalman Filtering and Neural Networks · doi:10.1002/0471221546.ch5 · Cited by 226
Jegadeeshwaran, R., & Sugumaran, V. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.08.007 · Cited by 222
Digital twin and cloud-side-end collaboration for intelligent battery management system
Wang, Y., Xu, R., Zhou, C., Kang, X., & Chen, Z. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.11.006 · Cited by 219
Cited by
Kong, X., & Hucks, R. G. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.104928 · Cited by 125
Metadata
- Authors
- Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z.
- Venue
- Structural and Multidisciplinary Optimization
- Published
- 2022-11-28
- Volume
- 65
- Issue
- 12
- ISSN
- 1615-147X (ISSN-L)
- 1615-1488
- OpenAlex
- W4310155374
- Cited by
- 441
- References
- 347
- FWCI
- 35.63
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.