CoChat

Strategy for the realisation of the International Height Reference System (IHRS)

Open access

The DOI matches its Crossref record; 97 of the 100 references it cites were found in a registry or an index.

Abstract

In 2015, the International Association of Geodesy defined the International Height Reference System (IHRS) as the conventional gravity field-related global height system. The IHRS is a geopotential reference system co-rotating with the Earth. Coordinates of points or objects close to or on the Earth’s surface are given by geopotential numbers C(P) referring to an equipotential surface defined by the conventional value W0 = 62,636,853.4 m 2 s−2, and geocentric Cartesian coordinates X referring to the International Terrestrial Reference System (ITRS). Current efforts concentrate on an accurate, consistent, and well-defined realisation of the IHRS to provide an international standard for the precise determination of physical coordinates worldwide. Accordingly, this study focuses on the strategy for the realisation of the IHRS; i.e. the establishment of the International Height Reference Frame (IHRF). Four main aspects are considered: (1) methods for the determination of IHRF physical coordinates; (2) standards and conventions needed to ensure consistency between the definition and the realisation of the reference system; (3) criteria for the IHRF reference network design and station selection; and (4) operational infrastructure to guarantee a reliable and long-term sustainability of the IHRF. A highlight of this work is the evaluation of different approaches for the determination and accuracy assessment of IHRF coordinates based on the existing resources, namely (1) global gravity models of high resolution, (2) precise regional gravity field modelling, and (3) vertical datum unification of the local height systems into the IHRF. After a detailed discussion of the advantages, current limitations, and possibilities of improvement in the coordinate determination using these options, we define a strategy for the establishment of the IHRF including data requirements, a set of minimum standards/conventions for the determination of potential coordinates, a first IHRF reference network configuration, and a proposal to create a component of the International Gravity Field Service (IGFS) dedicated to the maintenance and servicing of the IHRS/IHRF.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s00190-021-01481-0

Cites

97 of 97 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Fig. 3 Heights and reference surfaces (modified from Sánchez et al. 2018)
Fig. 3 Heights and reference surfaces (modified from Sánchez et al. 2018)CC-BY · From the PDF
Fig. 4 Geopotential number differences with respect to the mean value (model-mean) at the 223 GSVS17 benchmarks. Solutions are grouped according to the main data processing approach
Fig. 4 Geopotential number differences with respect to the mean value (model-mean) at the 223 GSVS17 benchmarks. Solutions are grouped according to the main data processing approachCC-BY · From the PDF
Image 5
CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Fig. 6 Baseline-length depending comparison between model-based ( C mod ) and levelling-based ( C lev ) potential differences (see Eq. (9)). a Comparison of the regional solutions; b comparison of the GGM-HRs
Fig. 6 Baseline-length depending comparison between model-based ( C mod ) and levelling-based ( C lev ) potential differences (see Eq. (9)). a Comparison of the regional solutions; b comparison of the GGM-HRsCC-BY · From the PDF
Image 8
CC-BY · From the PDF
Image 9
CC-BY · From the PDF
Image 10
CC-BY · From the PDF
Image 11
CC-BY · From the PDF
Fig. 11 IHRF realisation, maintenance, and servicing within the IGFS
Fig. 11 IHRF realisation, maintenance, and servicing within the IGFSCC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 97 references

Research works printed but not linked: 15

  1. Ågren J, Ellmann A (2019) Report of the Sub-commission 2.2: Methodology for Geoid and Physical Height Systems, Reports 2015–2019 of the International Association of Geodesy (IAG). Travaux de l’AIG 41:155–160
  2. Ahlgren K, Wang YM, Li X, Youngman M (2018) Towards a more consistent geoid model for North America. In: FIG congress 2018 proceedings, Istanbul
  3. Andersen OB (2010) The DTU10 gravity field and mean sea surface 2010. In: 2nd international symposium of the gravity field of the earth (IGFS-2), Fairbanks, Sept 2010
  4. Drewes H, Kuglitsch F, Ádám J, Rózsa S (2016) Geodesist’s handbook 2016. J Geod 90:907. https://doi.org/10.1007/s00190-016-0948-z · DOI · Paper page
  5. Forsberg R, Tscherning C (1997) Topographic effects in gravity field modelling for boundary-value problems. Geodetic boundary-value problems in view of the 1 cm—geoid. Lecture Notes in Earth Sciences 65. In: Sanso F, Rummel R (eds) Springer, Berlin, pp 241–272
  6. Heck B (1989) A contribution to the scalar free boundary value problem of physical geodesy. Manu Geod 14:87–99
  7. Hofmann-Wellenhof B, Moritz H (2005) Physical geodesy. Springer, Wien
  8. Huang J, Wang YM (2019) Report of Joint Study Group 0.15: Regional geoid/quasigeoid modelling—theoretical framework for the sub-centimetre, Reports 2015–2019 of the International Association of Geodesy (IAG). Travaux de l’AIG 41:495–499
  9. Kaula WM (1966) Theory of satellite geodesy. Blaisdell, Toronto
  10. Sacerdote F, Sansò F (1986) The scalar boundary value problem of physical geodesy. Manuscr Geod 11:15–28
  11. Sansò F (1995) The long road from measurements to boundary value problems in physical geodesy. Manu Geod 20(5):326–344
  12. (ed) Proceedings of the international summer school on local gravity field approximation, Beijing, 21 Aug-4 Sept 1984. Publ 60003
  13. Tscherning CC (1986) Functional methods for gravity field approximation in mathematical and numerical techniques in physical Geodesy. In: Sunkel H (ed) Lecture notes in earth sciences, vol. 7. Springer, Berlin, pp 3–47
  14. Tscherning CC (1993) Computation of covariances of derivatives of the anomalous gravity potential in a rotated reference frame. Man Geod 18(3):115–123
  15. Wang YM, Forsberg R (2019) Report of the Joint Working Group 2.2.2: the 1 cm geoid experiment, Reports 2015–2019 of the International Association of Geodesy (IAG). Travaux de l’AIG 41:178–179

Cited by

See all 99

Metadata

Authors
Sánchez, L., Ågren, J., Huang, J., Wang, Y. M., Mäkinen, J., Pail, R., Barzaghi, R., Vergos, G. S., Ahlgren, K., & Liu, Q.
Affiliations
  • University of Gävle (SE)
  • Natural Resources Canada (CA)
  • NOAA National Geodetic Survey (US)
  • Finnish Geospatial Research Institute (FI)
  • Technical University of Munich (DE)
  • Politecnico di Milano (IT)
  • Aristotle University of Thessaloniki (GR)
Venue
Journal of Geodesy
Published
2021-02-22
Volume
95
Issue
3
ISSN
  • 0949-7714 (ISSN-L)
  • 1432-1394
OpenAlex
W3130975274
Cited by
84
References
100
Citations by year
2026: 22 · 2025: 12 · 2024: 16 · 2023: 15 · 2022: 11 · 2021: 4
FWCI
5.53
Type
journal article
Language
en
Open access
Licence
Locations
  • Journal of Geodesy (publishedVersion, cc-by)
  • NOAA Institutional Repository (submittedVersion, cc-by)
  • Virtual Community of Pathological Anatomy (University of Castilla La Mancha) (submittedVersion, cc-by)
  • KTH Publication Database DiVA (KTH Royal Institute of Technology) (submittedVersion, other-oa)
  • Geo-Leo e-docs (Deutsche Initiative für Netzwerkinformation) (submittedVersion, cc-by-nd)
  • Informationszentrum Lebenswissenschaften (ZB MED) (submittedVersion, cc-by)
  • Työväentutkimus Vuosikirja (submittedVersion, cc-by)
  • mediaTUM – the media and publications repository of the Technical University Munich (Technical University Munich) (submittedVersion, cc-by)
  • mediaTUM – the media and publications repository of the Technical University Munich (Technical University Munich) (submittedVersion, other-oa)
Funders
  • Strong
  • Deutsche Forschungsgemeinschaft (SCHM 2433/11-1)
  • Natural Resources Canada
  • Natural Environment Research Council (BIGF010001)
Topics
  • Physical Sciences › Earth and Planetary Sciences › Geophysics › Geophysics and Gravity Measurements
  • Physical Sciences › Engineering › Aerospace Engineering › GNSS positioning and interference
  • Social Sciences › Geography, Planning and Development › Historical Geography and Cartography
Keywords
International Height Reference System, International Height Reference Frame, geopotential numbers, equipotential surfaces, global gravity field models, vertical datum unification, station selection

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Strategy for the realisation of the International Height Reference System (IHRS). https://app.cochat.ai/papers/10.1007/s00190-021-01481-0
The paper
Sánchez, L., Ågren, J., Huang, J., Wang, Y. M., Mäkinen, J., Pail, R., Barzaghi, R., Vergos, G. S., Ahlgren, K., & Liu, Q. (2021). Strategy for the realisation of the International Height Reference System (IHRS). Journal of Geodesy. https://doi.org/10.1007/s00190-021-01481-0

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.