The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
A review of wood thermal pretreatments to improve wood composite properties
Open accessAbstract
The objective of this paper is to review the published literature on improving properties of wood composites through thermal pretreatment of wood. Thermal pretreatment has been conducted in moist environments using hot water or steam at temperatures up to 180 and 230 °C, respectively, or in dry environments using inert gases at temperatures up to 240 °C. In these conditions, hemicelluloses are removed, crystallinity index of cellulose is increased, and cellulose degree of polymerization is reduced, while lignin is not considerably affected. Thermally modified wood has been used to manufacture wood–plastic composites, particleboard, oriented strand board, binderless panels, fiberboard, waferboard, and flakeboard. Thermal pretreatment considerably reduced water absorption and thickness swelling of wood composites, which has been attributed mainly to the removal of hemicelluloses. Mechanical properties have been increased or sometimes reduced, depending on the product and the conditions of the pretreatment. Thermal pretreatment has also shown to improve the resistance of composites to decay.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Features of promising technologies for pretreatment of lignocellulosic biomass
MOSIER, N. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.06.025 · Cited by 6,251
Hydrolysis of lignocellulosic materials for ethanol production: a review
Sun, Y., & Cheng, J. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00212-7 · Cited by 6,070
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Alvira, P., Tomás-Pejó, E., Ballesteros, M., & Negro, M. J. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.11.093 · Cited by 3,912 · cited 1×
“…of cellulosic ethanol (Mosier et al. 2005a; Öhgren et al. 2007; Carvalheiro et al. 2008; Taherzadeh and Karimi 2008; Hendriks and Zeeman 2009; Alvira et al. 2010; Girio et al. 2010), pretreatment via torrefaction for the production of synthetic fuels by means of gasification and for…”
Funke, A., & Ziegler, F. (2010) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.198 · Cited by 2,001 · cited 2×
“…treatment (Kobayashi et al. 2009; Xiao et al. 2011), water hydrolysis (Harris 1952), wet torrefaction (Yan et al. 2010), hydrothermal carbonization (Funke and Ziegler 2010; Falco et al. 2011; Hoekman et al. 2011; Libra et al. 2011), aqueous fractionation, solvolysis or aquasolv (Agbor et al.…”
Pretreatment: the key to unlocking low‐cost cellulosic ethanol
Yang, B., & Wyman, C. E. (2008) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.49 · Cited by 1,524 · cited 2×
“…recalcitrance to make cellulose and hemicelluloses susceptible to enzymatic hydrolysis for the production of fermentable sugars (Sun and Cheng 2002; Yang and Wyman 2008; Hendriks and Zeeman 2009; Wang et al. 2009; Zhu and Pan 2010; Agbor et al. 2011); the production of wood composites requires…”
Biomass upgrading by torrefaction for the production of biofuels: A review
van der Stelt, M. J. C., Gerhauser, H., Kiel, J. H. A., & Ptasinski, K. J. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.06.023 · Cited by 1,262
Hydrothermal processing of lignocellulosic materials
Garrote, G., Domínguez, H., & Parajó, J. C. (1999) · Holz als Roh- und Werkstoff · doi:10.1007/s001070050039 · Cited by 880 · cited 8×
“The mechanisms involved in the thermal pretreatment of wood have been reviewed by Garrote et al. (1999), Boonstra (2008), and Liu (2010).”
InfluentialPyrolysis kinetics of lignocellulosic materials—three independent reactions model
Orfão, J. J. M., Antunes, F. J. A., & Figueiredo, J. L. (1999) · Fuel · doi:10.1016/s0016-2361(98)00156-2 · Cited by 771 · cited 8×
“The thermal degradation and evaporation of extractives are overlapped with that of hemicelluloses, cellulose, and lignin (Órfão et al. 1999).”
InfluentialKlyosov, A. A. (2007) · doi:10.1002/9780470165935 · Cited by 673
Forest Products and Wood Science An Introduction
Shmulsky, R., & Jones, P. D. (2011) · doi:10.1002/9780470960035 · Cited by 620
Chen, W.-H., & Kuo, P.-C. (2010) · Energy · doi:10.1016/j.energy.2010.02.054 · Cited by 603
An investigation of the grindability of two torrefied energy crops
Bridgeman, T. G., Jones, J. M., Williams, A., & Waldron, D. J. (2010) · Fuel · doi:10.1016/j.fuel.2010.06.043 · Cited by 319
Felfli, F. F., Luengo, C. A., Suárez, J. A., & Beatón, P. A. (2005) · Energy for Sustainable Development · doi:10.1016/s0973-0826(08)60519-0 · Cited by 221 · cited 2×
“The mechanism of biomass torrefaction has been widely studied and reported elsewhere (Fonseca et al. 2005; Bellais et al. 2003; Turner et al. 2010; Repellin et al. 2010a; Ciolkosz and Wallace 2011).”
BackgroundPretreatment and feeding of biomass for pressurized entrained flow gasification
Svoboda, K., Pohořelý, M., Hartman, M., & Martinec, J. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.12.005 · Cited by 192
Cited by
Progress in biomass torrefaction: Principles, applications and challenges
Chen, W.-H., Lin, B.-J., Lin, Y.-Y., Chu, Y.-S., Ubando, A. T., Show, P. L., Ong, H. C., Chang, J.-S., Ho, S.-H., Culaba, A. B., et al. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100887 · Cited by 925
Wood modification technologies - a review
Sandberg, D., Kutnar, A., & Mantanis, G. (2017) · iForest - Biogeosciences and Forestry · doi:10.3832/ifor2380-010 · Cited by 486
Thermal modification of wood—a review: chemical changes and hygroscopicity
Hill, C., Altgen, M., & Rautkari, L. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05722-z · Cited by 378
Composites of Wood and Biodegradable Thermoplastics: A Review
Chan, C. M., Vandi, L.-J., Pratt, S., Halley, P., Richardson, D., Werker, A., & Laycock, B. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1380039 · Cited by 207
Perspectives of Engineered Biochar for Environmental Applications: A Review
Haghighi Mood, S., Pelaez-Samaniego, M. R., & Garcia-Perez, M. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01201 · Cited by 104
Metadata
- Authors
- Pelaez-Samaniego, M. R., Yadama, V., Lowell, E., & Espinoza-Herrera, R.
- Venue
- Wood Science and Technology
- Published
- 2013-07-27
- Volume
- 47
- Issue
- 6
- Pages
- 1285-1319
- ISSN
- 0043-7719 (ISSN-L)
- 1432-5225
- OpenAlex
- W2000583451
- Cited by
- 223
- References
- 15
- FWCI
- 18.48
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.