CoChat

A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales

Open access
Schwiedrzik, J. J., Wolfram, U., Zysset, P. K. · 2013 · Biomechanics and Modeling in Mechanobiology

The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.

Abstract

Nonlinear computational analysis of materials showing elasto-plasticity or damage relies on knowledge of their yield behavior and strengths under complex stress states. In this work, a generalized anisotropic quadric yield criterion is proposed that is homogeneous of degree one and takes a convex quadric shape with a smooth transition from ellipsoidal to cylindrical or conical surfaces. If in the case of material identification, the shape of the yield function is not known a priori, a minimization using the quadric criterion will result in the optimal shape among the convex quadrics. The convexity limits of the criterion and the transition points between the different shapes are identified. Several special cases of the criterion for distinct material symmetries such as isotropy, cubic symmetry, fabric-based orthotropy and general orthotropy are presented and discussed. The generality of the formulation is demonstrated by showing its degeneration to several classical yield surfaces like the von Mises, Drucker-Prager, Tsai-Wu, Liu, generalized Hill and classical Hill criteria under appropriate conditions. Applicability of the formulation for micromechanical analyses was shown by transformation of a criterion for porous cohesive-frictional materials by Maghous et al. In order to demonstrate the advantages of the generalized formulation, bone is chosen as an example material, since it features yield envelopes with different shapes depending on the considered length scale. A fabric- and density-based quadric criterion for the description of homogenized material behavior of trabecular bone is identified from uniaxial, multiaxial and torsional experimental data. Also, a fabric- and density-based Tsai-Wu yield criterion for homogenized trabecular bone from in silico data is converted to an equivalent quadric criterion by introduction of a transformation of the interaction parameters. Finally, a quadric yield criterion for lamellar bone at the microscale is identified from a nanoindentation study reported in the literature, thus demonstrating the applicability of the generalized formulation to the description of the yield envelope of bone at multiple length scales.

Overview

Integrity signals

Registry

Crossref · 10.1007/s10237-013-0472-5

Cites

45 of 45 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 45 references

Research works printed but not linked: 2

  1. Cowin SC (1989) Bone mechanics. CRC press, Boca Raton, FL
  2. Prager W, Drucker D (1952) Soil mechanics and plastic analysis or limit design, 0. Appi Math 10(2):157–165

Cited by

See all 84

Metadata

Authors
Schwiedrzik, J. J., Wolfram, U., & Zysset, P. K.
Affiliations
University of Bern (CH)
Corresponding author
Schwiedrzik, J. J.
Venue
Biomechanics and Modeling in Mechanobiology
Published
2013-02-15
Volume
12
Issue
6
Pages
1155-1168
ISSN
  • 1617-7940 (ISSN-L)
  • 1617-7959
OpenAlex
W2085035891
Cited by
77
References
45
Citations by year
2026: 6 · 2025: 6 · 2024: 5 · 2023: 7 · 2022: 8 · 2021: 4 · 2020: 6 · 2019: 6 · 2018: 6 · 2017: 6 · 2016: 6 · 2015: 6 · 2014: 3 · 2013: 2
FWCI
6.53
Type
journal article
Language
en
Open access
Licence
  • other-oa
  • www.springer.com/tdm (tdm)
Locations
  • Biomechanics and Modeling in Mechanobiology (publishedVersion)
  • PubMed (publishedVersion)
  • reroDoc Digital Library (submittedVersion)
  • Bern Open Repository and Information System (University of Bern) (submittedVersion, other-oa)
  • Open Access CRIS of the University of Bern
Topics
  • Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
  • Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
  • Physical Sciences › Engineering › Mechanical Engineering › Metal Forming Simulation Techniques
Keywords
yield surface, bone, trabecular bone, lamellar bone, Tsai-Wu criterion, von Mises yield criterion, Drucker-Prager model, Hill criterion, orthotropy, material identification, micromechanical homogenization, nanoindentation, multiaxial loading, torsional loading, length scale effects
MeSH terms
Biomechanical Phenomena, Bone and Bones, Models, Biological, Stress, Mechanical, Tensile Strength, Porosity, Anisotropy, Compressive Strength

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales. https://app.cochat.ai/papers/10.1007/s10237-013-0472-5
The paper
Schwiedrzik, J. J., Wolfram, U., & Zysset, P. K. (2013). A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-013-0472-5

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.