A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales
Open accessThe DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Abstract
Nonlinear computational analysis of materials showing elasto-plasticity or damage relies on knowledge of their yield behavior and strengths under complex stress states. In this work, a generalized anisotropic quadric yield criterion is proposed that is homogeneous of degree one and takes a convex quadric shape with a smooth transition from ellipsoidal to cylindrical or conical surfaces. If in the case of material identification, the shape of the yield function is not known a priori, a minimization using the quadric criterion will result in the optimal shape among the convex quadrics. The convexity limits of the criterion and the transition points between the different shapes are identified. Several special cases of the criterion for distinct material symmetries such as isotropy, cubic symmetry, fabric-based orthotropy and general orthotropy are presented and discussed. The generality of the formulation is demonstrated by showing its degeneration to several classical yield surfaces like the von Mises, Drucker-Prager, Tsai-Wu, Liu, generalized Hill and classical Hill criteria under appropriate conditions. Applicability of the formulation for micromechanical analyses was shown by transformation of a criterion for porous cohesive-frictional materials by Maghous et al. In order to demonstrate the advantages of the generalized formulation, bone is chosen as an example material, since it features yield envelopes with different shapes depending on the considered length scale. A fabric- and density-based quadric criterion for the description of homogenized material behavior of trabecular bone is identified from uniaxial, multiaxial and torsional experimental data. Also, a fabric- and density-based Tsai-Wu yield criterion for homogenized trabecular bone from in silico data is converted to an equivalent quadric criterion by introduction of a transformation of the interaction parameters. Finally, a quadric yield criterion for lamellar bone at the microscale is identified from a nanoindentation study reported in the literature, thus demonstrating the applicability of the generalized formulation to the description of the yield envelope of bone at multiple length scales.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Therefore, more generalized failure criteria (30–32), such as those based on the Tsai–Wu criterion, have been applied to cortical bone.”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [31]
Citations
Cites
The Mathematical Theory Of Plasticity
Hill, R. (1998) · doi:10.1093/oso/9780198503675.001.0001 · Cited by 7,830
The mathematical Theory of Plasticity
(2008) · Computational Methods for Plasticity · doi:10.1002/9780470694626.ch6 · Cited by 4,836
Soil mechanics and plastic analysis or limit design
Drucker, D. C., & Prager, W. (1952) · Quarterly of Applied Mathematics · doi:10.1090/qam/48291 · Cited by 4,160
A General Theory of Strength for Anisotropic Materials
Tsai, S. W., & Wu, E. M. (1971) · Journal of Composite Materials · doi:10.1177/002199837100500106 · Cited by 3,393
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
Mechanik der festen Körper im plastisch- deformablen Zustand
Mises, R. V. (1913) · Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse · Cited by 2,371
Discriminants, Resultants, and Multidimensional Determinants
Gelfand, I. M., Kapranov, M. M., & Zelevinsky, A. V. (1994) · Birkhäuser Boston eBooks · doi:10.1007/978-0-8176-4771-1 · Cited by 2,306
Hildebrand, T., Laib, A., Müller, R., Dequeker, J., & Rüegsegger, P. (1999) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.1999.14.7.1167 · Cited by 1,303
The mechanical behaviour of cancellous bone
Gibson, L. J. (1985) · Journal of Biomechanics · doi:10.1016/0021-9290(85)90287-8 · Cited by 932
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Distribution of directional data and fabric tensors
Ken-Ichi, K. (1984) · International Journal of Engineering Science · doi:10.1016/0020-7225(84)90090-9 · Cited by 663
Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor
Harrigan, T. P., & Mann, R. W. (1984) · Journal of Materials Science · doi:10.1007/bf00540446 · Cited by 603
The quantitative morphology of anisotropic trabecular bone
Whitehouse, W. J. (1974) · Journal of Microscopy · doi:10.1111/j.1365-2818.1974.tb03878.x · Cited by 579
The relationship between the elasticity tensor and the fabric tensor
Cowin, S. C. (1985) · Mechanics of Materials · doi:10.1016/0167-6636(85)90012-2 · Cited by 570
Parfitt, A. M. (1984) · Calcified Tissue International · doi:10.1007/bf02406145 · Cited by 441
EIGENTENSORS OF LINEAR ANISOTROPIC ELASTIC MATERIALS
MEHRABADI, M. M., & COWIN, S. C. (1990) · The Quarterly Journal of Mechanics and Applied Mathematics · doi:10.1093/qjmam/43.1.15 · Cited by 386
EIGENTENSORS OF LINEAR ANISOTROPIC ELASTIC MATERIALS
MEHRABADI, M. M., & COWIN, S. C. (1991) · The Quarterly Journal of Mechanics and Applied Mathematics · doi:10.1093/qjmam/44.2.331 · Cited by 270
Deformation and Fracture Mechanisms of Bone and Nacre
Wang, R., & Gupta, H. S. (2011) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-062910-095806 · Cited by 238
A review of morphology–elasticity relationships in human trabecular bone: theories and experiments
Zysset, P. K. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00128-3 · Cited by 223
Self-citationAn alternative model for anisotropic elasticity based on fabric tensors
Zysset, P. K., & Curnier, A. (1995) · Mechanics of Materials · doi:10.1016/0167-6636(95)00018-6 · Cited by 210
Self-citationMulti-axial mechanical properties of human trabecular bone
Rincón-Kohli, L., & Zysset, P. K. (2009) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-008-0128-z · Cited by 177
Self-citationMicromechanical approach to the strength properties of frictional geomaterials
Maghous, S., Dormieux, L., & Barthélémy, J. F. (2009) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2008.03.002 · Cited by 163
Nanogranular Origins of the Strength of Bone
Tai, K., Ulm, F.-J., & Ortiz, C. (2006) · Nano Letters · doi:10.1021/nl061877k · Cited by 154
Are mineralized tissues open crystal foams reinforced by crosslinked collagen?—some energy arguments
Hellmich, C., & Ulm, F. (2002) · Journal of Biomechanics · doi:10.1016/s0021-9290(02)00080-5 · Cited by 131
Fracture of bone tissue: The ‘hows’ and the ‘whys’
Gupta, H. S., & Zioupos, P. (2008) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2008.09.007 · Cited by 129
Krstić, R. V. (1991) · Springer eBooks · doi:10.1007/978-3-662-02676-2 · Cited by 128
On the asymmetric yield surface of plastically orthotropic materials: A phenomenological study
Liu, C. (1997) · Acta Materialia · doi:10.1016/s1359-6454(96)00349-7 · Cited by 124
Matsuura, M., Eckstein, F., Lochmüller, E.-M., & Zysset, P. K. (2008) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-006-0073-7 · Cited by 117 · cited 2×
“In the particular case of the Zysset– Curnier model (Zysset and Curnier 1995), the influence of these two factors on its homogenized mechanical properties is governed by two exponents p and q that need to be determined experimentally (Matsuura et al. 2008; Rincón-Kohli and Zysset 2009; Zysset and Rincón 2006; Wolfram…”
BackgroundSelf-citationFurther Developments in Anisotropic Plasticity
SHIH, C. F., & Lee, D. (1978) · Journal of Engineering Materials and Technology · doi:10.1115/1.3443493 · Cited by 112
On the Strength Anisotropy of Bone and Wood
Cowin, S. C. (1979) · Journal of Applied Mechanics · doi:10.1115/1.3424663 · Cited by 103
Computational Methods in Solid Mechanics
Curnier, A. (1994) · Solid mechanics and its applications · doi:10.1007/978-94-011-1112-6 · Cited by 100
The Modified Super-Ellipsoid Yield Criterion for Human Trabecular Bone
Bayraktar, H. H., Gupta, A., Kwon, R. Y., Papadopoulos, P., & Keaveny, T. M. (2004) · Journal of Biomechanical Engineering · doi:10.1115/1.1763177 · Cited by 99
Fabric dependence of an anisotropic strength criterion
Cowin, S. C. (1986) · Mechanics of Materials · doi:10.1016/0167-6636(86)90022-0 · Cited by 87
Fabric-based Tsai–Wu yield criteria for vertebral trabecular bone in stress and strain space
Wolfram, U., Gross, T. J., Pahr, D. H., Schwiedrzik, J. J., Wilke, H., & Zysset, P. K. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.07.005 · Cited by 78
Self-citationCarnelli, D., Lucchini, R., Ponzoni, M., Contro, R., & Vena, P. (2011) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2011.04.020 · Cited by 77
Elastic anisotropy of bone lamellae as a function of fibril orientation pattern
Reisinger, A., Pahr, D. H., & Zysset, P. K. (2010) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-010-0218-6 · Cited by 72
Self-citationA multidimensional anisotropic strength criterion based on Kelvin modes
Arramon, Y. P., Mehrabadi, M. M., Martin, D. W., & Cowin, S. C. (2000) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(98)00338-2 · Cited by 51
Wang, X., Allen, M. R., Burr, D. B., Lavernia, E. J., Jeremić, B., & Fyhrie, D. P. (2008) · Bone · doi:10.1016/j.bone.2008.05.023 · Cited by 47
Carnelli, D., Gastaldi, D., Sassi, V., Contro, R., Ortiz, C., & Vena, P. (2010) · Journal of Biomechanical Engineering · doi:10.1115/1.4001358 · Cited by 41
An Alternative Fabric-based Yield and Failure Criterion for Trabecular Bone
Zysset, P., & Rincón, L. (2006) · Mechanics of Biological Tissue · doi:10.1007/3-540-31184-x_33 · Cited by 39 · cited 13×
“(1997), generalized Hill (Zysset and Rincón 2006) and classical (Hill 1951) criteria.”
BackgroundMethodInfluentialSelf-citationTensile and compressive stress yield criteria for cancellous bone
Cowin, S. C., & He, Q. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.03.003 · Cited by 34
Yeni, Y. N., Dong, X., Fyhrie, D. P., & Les, C. M. (2004) · PubMed · Cited by 32
Smith, C. I., Faraldos, M., & Fernández–Jalvo, Y. (2008) · Palaeogeography Palaeoclimatology Palaeoecology · doi:10.1016/j.palaeo.2008.03.028 · Cited by 21
Research works printed but not linked: 2
- Cowin SC (1989) Bone mechanics. CRC press, Boca Raton, FL
- Prager W, Drucker D (1952) Soil mechanics and plastic analysis or limit design, 0. Appi Math 10(2):157–165
Cited by
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
Post-yield and failure properties of cortical bone
Wolfram, U., & Schwiedrzik, J. J. (2016) · BoneKEy Reports · doi:10.1038/bonekey.2016.60 · Cited by 112
Self-citationSchwiedrzik, J. J., Gross, T., Bina, M., Pretterklieber, M. L., Zysset, P. K., & Pahr, D. H. (2015) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2739 · Cited by 64
Self-citationHosseini, H. S., Dünki, A., Fabech, J., Stauber, M., Vilayphiou, N., Pahr, D. H., Pretterklieber, M. L., Wandel, J., van Rietbergen, B., & Zysset, P. K. (2017) · Bone · doi:10.1016/j.bone.2017.01.003 · Cited by 61
Self-citationA Review on Recent Advances in the Constitutive Modeling of Bone Tissue
Pahr, D. H., & Reisinger, A. (2020) · Current Osteoporosis Reports · doi:10.1007/s11914-020-00631-1 · Cited by 57
Metadata
- Authors
- Schwiedrzik, J. J., Wolfram, U., & Zysset, P. K.
- Affiliations
- University of Bern (CH)
- Corresponding author
- Schwiedrzik, J. J.
- Venue
- Biomechanics and Modeling in Mechanobiology
- Published
- 2013-02-15
- Volume
- 12
- Issue
- 6
- Pages
- 1155-1168
- ISSN
- 1617-7940 (ISSN-L)
- 1617-7959
- OpenAlex
- W2085035891
- Cited by
- 77
- References
- 45
- Citations by year
- 2026: 6 · 2025: 6 · 2024: 5 · 2023: 7 · 2022: 8 · 2021: 4 · 2020: 6 · 2019: 6 · 2018: 6 · 2017: 6 · 2016: 6 · 2015: 6 · 2014: 3 · 2013: 2
- FWCI
- 6.53
- Type
- journal article
- Language
- en
- Open access
- green
- boris.unibe.ch
- Licence
- other-oa
- www.springer.com/tdm (tdm)
- Locations
- Biomechanics and Modeling in Mechanobiology (publishedVersion)
- PubMed (publishedVersion)
- reroDoc Digital Library (submittedVersion)
- Bern Open Repository and Information System (University of Bern) (submittedVersion, other-oa)
- Open Access CRIS of the University of Bern
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Physical Sciences › Engineering › Mechanical Engineering › Metal Forming Simulation Techniques
- Keywords
- yield surface, bone, trabecular bone, lamellar bone, Tsai-Wu criterion, von Mises yield criterion, Drucker-Prager model, Hill criterion, orthotropy, material identification, micromechanical homogenization, nanoindentation, multiaxial loading, torsional loading, length scale effects
- MeSH terms
- Biomechanical Phenomena, Bone and Bones, Models, Biological, Stress, Mechanical, Tensile Strength, Porosity, Anisotropy, Compressive Strength
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.