CoChat

Synthesis and characterization of bioresorbable in situ crosslinkable ultra low molecular weight poly(lactide) macromer

Jabbari, Esmaiel, He, Xuezhong · 2008 · Journal of Materials Science: Materials in Medicine

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Abstract

Reactive low molecular weight poly(L-lactide) (PLA) is required to produce in situ hardened scaffolds with fast rate of crosslinking, high crosslink density, and adequate mechanical strength. The objective of this work was to synthesize unsaturated ultra low molecular weight PLA (ULMW PLA) as an injectable in situ crosslinkable macromer for biomedical applications. Low molecular weight PLA was synthesized by ring-opening polymerization of L-lactide (LA) using diethylene glycol (DEG) as the initiator. The molar ratio of the LA to DEG ranged from 5 to 20. Non-solvents methanol, ether, and hexane were used for purification and fractionation. The PLA samples that were precipitated in methanol and ether had narrow distributions (PDI=1.2) and resulted in a powder with M(n) of 4.8 and a wax with M(n) of 3.6 kDa, respectively. The PLA sample in which the supernatant from ether was re-precipitated in hexane produced a viscous ULMW PLA with M(n) and PDI of 1.2 kDa and 1.2, respectively. The ULMW PLA was reacted with fumaryl chloride to produce unsaturated in situ crosslinkable poly(lactide fumarate) (PLAF) macromer. Porous scaffolds were produced after injection and in situ crosslinking of the PLAF macromer with NVP crosslinker in the presence of a porogen. New bone was formed in the scaffold when it was implanted in nude mice which demonstrated that the scaffold was osteoconductive. PLAF is potentially useful as a reactive macromer in fabrication of bioresorbable injectable in situ crosslinkable scaffolds for tissue regeneration.

Overview

Integrity signals

Registry

Crossref · 10.1007/s10856-006-0020-2

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 36 references

Research works printed but not linked: 7

  1. Y. CHARBIT, C. HITZIG, M. BOLLA, C. BITTON and M. F. BERTRAND, Biomed. Instrum. Technol. 33 (1999) 71
  2. E. JABBARI, K. W. LEE, A. C. ELLISON, M. J. MOORE, J. A. TESK and M. J. YASZEMSKI, Trans. Soc. Biomater. (2004) 1348
  3. E. JABBARI, A. V. FLORSCHUTZ, L. G. PETERSEN, N. LIU, L. LU, B. L. CURRIER, M. J. YASZEMSKI, Trans. Soc. Biomaterials (2004) 512
  4. E. JABBARI, J. A. GRUETZMACHER, L. LU, B. L. CURRIER and M. J. YASZEMSKI, Trans. IEEE Med. Biol. (2003) 1219
  5. E. JABBARI, J. A. GRUETZMACHER, L. LU, B. L. CURRIER, M. J. YASZEMSKI, Trans. Soc. Biomaterials 986 (2004)
  6. E. JABBARI, Q. K. KANG and Y. H. AN, MUSC Orthopaedic J. 8 (2005) 47
  7. E. JABBARI, Trans. Soc. Biomaterials 491 (2006)

Cited by

See all 42

Metadata

Authors
Jabbari, E., & He, X.
Affiliations
University of South Carolina (US)
Corresponding author
Jabbari, Esmaiel
Venue
Journal of Materials Science: Materials in Medicine
Published
2007-06-28
Volume
19
Issue
1
Pages
311-318
ISSN
  • 0957-4530 (ISSN-L)
  • 1573-4838
OpenAlex
W2170145624
Cited by
42
References
34
Citations by year
2023: 1 · 2021: 1 · 2020: 1 · 2018: 1 · 2017: 1 · 2016: 1 · 2015: 1 · 2013: 4 · 2012: 11
FWCI
2.88
Type
journal article
Language
en
Open access
closed
Licence
www.springer.com/tdm (tdm)
Locations
  • Journal of Materials Science Materials in Medicine (publishedVersion)
  • PubMed (publishedVersion)
  • Scholar Commons (University of South Carolina) (submittedVersion)
Funders
Aircast Foundation
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
  • Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
Keywords
injectable scaffolds, ring-opening polymerization, osteoconduction, bone regeneration, bioresorbable scaffolds, molecular weight distribution
MeSH terms
Methanol, Animals, Biocompatible Materials, Biomedical Engineering, Calorimetry, Differential Scanning, Fumarates, Materials Testing, Mice, Nude, Molecular Weight, Polyesters, Subcellular Fractions, Porosity, Absorbable Implants, Tissue Engineering, Mice

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Synthesis and characterization of bioresorbable in situ crosslinkable ultra low molecular weight poly(lactide) macromer. https://app.cochat.ai/papers/10.1007/s10856-006-0020-2
The paper
Jabbari, E., & He, X. (2008). Synthesis and characterization of bioresorbable in situ crosslinkable ultra low molecular weight poly(lactide) macromer. Journal of Materials Science: Materials in Medicine. https://doi.org/10.1007/s10856-006-0020-2

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.