The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Harmonization of LCA methodologies for the metal and mining industry
Open accessAbstract
The metal and mining industry routinely conducts life cycle assessment studies to monitor and document the potential environmental impacts of their products. These studies are typically conducted independently by the various commodity associations. To facilitate alignment of these methodologies, a working group comprised of interested industry organizations and their representatives was formed to propose uniform recommendations for key methodological choices. Existing methodologies used by the participating associations were reviewed to identify areas of alignment as well as areas which could benefit from discussions and alignment. Recommendations for selected topics were then developed through a series of moderated discussions among the participating organizations throughout 2012 and 2013. Efforts were taken in the creation of the document to ensure alignment with the international standards ISO 14040 ( 2006 ) and ISO 14044 ( 2006 ). Four methodology issues were chosen to be addressed with respect to industry alignment: system boundary, recycling allocation, co-product allocation, and impact assessment categories. Recommendations for system boundary conclude that boundaries should include end-of-life disposal and recycling and, whenever possible, the product use phase, particularly for material and product comparison. For co-product allocation methods, the recommendations were based on the type of co-products being produced and included a range of options to guide practitioners’ decisions. It was recommended for recycling allocation that practitioners use the avoided burden methodology. Lastly, for the life cycle impact assessment stage, it was recommended that life cycle assessments (LCAs) on metal and mining products should report the following impact categories: global warming potential, acidification potential, eutrophication potential, photochemical oxidant creation potential, and ozone depletion potential. It was recommended that inclusion of other impact categories will be periodically re-evaluated by the metal industry. Further, the recommendation is that, while impact categories included are limited to the five above, all life cycle inventory (LCI) datasets themselves should contain accurate and comprehensive inventory data, given reasonable accessibility and data collection cost constraints. Methodological alignment for LCA studies in the metal and mining industry will lead to improved consistency and applicability of the LCA data and results. Specifically, these recommendations improve the consistency of decisions regarding system boundary, recycling allocation, co-product allocation, and impact assessment categories. Further research is suggested to improve the specificity of certain recommendations (e.g., allocation), as well as expand the scope of the harmonization efforts to include other methodological decisions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
What Do We Know About Metal Recycling Rates?
Graedel, T. E., Allwood, J., Birat, J.-P., Buchert, M., Hagelüken, C., Reck, B. K., Sibley, S. F., & Sonnemann, G. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00342.x · Cited by 43
Research works printed but not linked: 6
- Ardente F, Cellura M (2012) Economic allocation in life cycle assessment. J Ind Ecol 16(3):387–398 · DOI · Paper page
- Atherton J (2007) Declaration of the metals industry on recycling principles. Int J Life Cycle Assess 12:59–60 · DOI
- Cooper JS (2003) Specifying functional units and reference flows for comparable alternatives. Int J Life Cycle Assess 8(6):337–349 · DOI
- Koffler C, Geyer R, Volz T (2014) Life cycle inventory. In: Schenk R, White P (eds.): Environmental life cycle assessment—measuring the environmental performance of products. American Center for Life Cycle Assessment, pp 46–58
- Reck BK, Graedel TE (2012) Challenges in metal recycling. Science 337(6095):690–695 · DOI · Paper page
- Tuusjarvi M, Vuori S, Maenpaa I (2012) Metal mining and environmental assessments: a new approach to allocation. J Ind Ecol 16(5):735–747 · doi:10.1111/j.1530-9290.2012.00469.x
Cited by
A review on the impact of mining and mineral processing industries through life cycle assessment
Farjana, S. H., Huda, N., Parvez Mahmud, M. A., & Saidur, R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.264 · Cited by 258
Water footprinting and mining: where are the limitations and opportunities?
Northey, S. A., Mudd, G. M., Saarivuori, E., Wessman-Jääskeläinen, H., & Haque, N. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.024 · Cited by 212
Sáez-Guinoa, J., García-Franco, E., Llera-Sastresa, E., & Romeo, L. M. (2024) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-023-02257-8 · Cited by 57
Munagala, M., Shastri, Y., Nagarajan, S., & Ranade, V. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115590 · Cited by 48
Production weighted water use impact characterisation factors for the global mining industry
Northey, S. A., Madrid López, C., Haque, N., Mudd, G. M., & Yellishetty, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.307 · Cited by 28
Metadata
- Authors
- Santero, N., & Hendry, J.
- Venue
- The International Journal of Life Cycle Assessment
- Published
- 2016-01-22
- Volume
- 21
- Issue
- 11
- Pages
- 1543-1553
- ISSN
- 0948-3349 (ISSN-L)
- 1614-7502
- OpenAlex
- W2260467401
- Cited by
- 173
- References
- 1
- FWCI
- 6.54
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Harmonization of LCA methodologies for the metal and mining industry. https://app.cochat.ai/papers/10.1007/s11367-015-1022-4
- The paper
- Santero, N., & Hendry, J. (2016). Harmonization of LCA methodologies for the metal and mining industry. The International Journal of Life Cycle Assessment. https://doi.org/10.1007/s11367-015-1022-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.