Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
This study investigates the effect of propellant gas, helium, and nitrogen during cold spraying of titanium coatings. Coatings were characterized by SEM and were evaluated for their deposition efficiency (DE), microhardness, and porosity. In selected conditions, three particle velocities were investigated in which for each condition, the propelling gases’ temperature and pressure were attuned to attain similar particle velocities for each gas. Observations show that loosely bonded particles can be detached by high-pressure supersonic gas stream. Selected coatings were characterized by XPS to analyze the occurrence of oxidation and nitridation. Although generally accepted that coating characteristics can be affected by particle temperature, results show that for the same particle velocity, DE and coating density are also a function of substrate temperature. In addition, a thick and fully dense cold sprayed titanium coating was achieved with optimized spray parameters and nozzle using helium. The corresponding average particle velocity was 1173 m/s.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bonding mechanism in cold gas spraying
Assadi, H., Gärtner, F., Stoltenhoff, T., & Kreye, H. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00274-x · Cited by 1,811
Development of a generalized parameter window for cold spray deposition
Schmidt, T., Gärtner, F., Assadi, H., & Kreye, H. (2006) · Acta Materialia · doi:10.1016/j.actamat.2005.10.005 · Cited by 1,183
From Particle Acceleration to Impact and Bonding in Cold Spraying
Schmidt, T., Assadi, H., Gärtner, F., Richter, H., Stoltenhoff, T., Kreye, H., & Klassen, T. (2009) · Journal of Thermal Spray Technology · doi:10.1007/s11666-009-9357-7 · Cited by 638
Characterization of Cold Spray Titanium Supersonic Jet
Zahiri, S. H., Yang, W., & Jahedi, M. (2009) · Journal of Thermal Spray Technology · doi:10.1007/s11666-008-9278-x · Cited by 61
Cited by
Solid-state cold spraying of Ti and its alloys: A literature review
Li, W., Cao, C., & Yin, S. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100633 · Cited by 257
Adhesion strength of titanium particles to alumina substrates: A combined cold spray and LIPIT study
Imbriglio, S. I., Hassani-Gangaraj, M., Veysset, D., Aghasibeig, M., Gauvin, R., Nelson, K. A., Schuh, C. A., & Chromik, R. R. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.01.071 · Cited by 47
Application of a holistic 3D model to estimate state of cold spray titanium particles
Faizan-Ur-Rab, M., Zahiri, S. H., Masood, S. H., Phan, T. D., Jahedi, M., & Nagarajah, R. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.075 · Cited by 41
Metadata
- Authors
- Wong, W., Irissou, E., Ryabinin, A. N., Legoux, J.-G., & Yue, S.
- Venue
- Journal of Thermal Spray Technology
- Published
- 2010-11-02
- Volume
- 20
- Issue
- 1-2
- Pages
- 213-226
- ISSN
- 1059-9630 (ISSN-L)
- 1544-1016
- OpenAlex
- W2044274291
- Cited by
- 172
- References
- 4
- FWCI
- 16.90
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings. https://app.cochat.ai/papers/10.1007/s11666-010-9568-y
- The paper
- Wong, W., Irissou, E., Ryabinin, A. N., Legoux, J.-G., & Yue, S. (2011). Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings. Journal of Thermal Spray Technology. https://doi.org/10.1007/s11666-010-9568-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.