The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Microporous bamboo biochar for lithium-sulfur batteries
Open accessAbstract
Being simple, inexpensive, scalable and environmentally friendly, microporous biomass biochars have been attracting enthusiastic attention for application in lithium-sulfur (Li-S) batteries. Herein, porous bamboo biochar is activated via a KOH/annealing process that creates a microporous structure, boosts surface area and enhances electronic conductivity. The treated sample is used to encapsulate sulfur to prepare a microporous bamboo carbon-sulfur (BC-S) nanocomposite for use as the cathode for Li-S batteries for the first time. The BC-S nanocomposite with 50 wt.% sulfur content delivers a high initial capacity of 1,295 mA·h/g at a low discharge rate of 160 mA/g and high capacity retention of 550 mA·h/g after 150 cycles at a high discharge rate of 800 mA/g with excellent coulombic efficiency (⩾95%). This suggests that the BC-S nanocomposite could be a promising cathode material for Li-S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
KOH activation of carbon-based materials for energy storage
Wang, J., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34066f · Cited by 2,726
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Kannan, N., & Sundaram, M. M. (2001) · Dyes and Pigments · doi:10.1016/s0143-7208(01)00056-0 · Cited by 1,969
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Fibrous Hybrid of Graphene and Sulfur Nanocrystals for High-Performance Lithium–Sulfur Batteries
Zhou, G., Yin, L.-C., Wang, D.-W., Li, L., Pei, S., Gentle, I. R., Li, F., & Cheng, H.-M. (2013) · ACS Nano · doi:10.1021/nn401228t · Cited by 761
Li, Z., Jiang, Y., Yuan, L., Yi, Z., Wu, C., Liu, Y., Strasser, P., & Huang, Y. (2014) · ACS Nano · doi:10.1021/nn503220h · Cited by 590
Tailoring Porosity in Carbon Nanospheres for Lithium–Sulfur Battery Cathodes
He, G., Evers, S., Liang, X., Cuisinier, M., Garsuch, A., & Nazar, L. F. (2013) · ACS Nano · doi:10.1021/nn404439r · Cited by 475
Xi, K., Cao, S., Peng, X., Ducati, C., Vasant Kumar, R., & Cheetham, A. K. (2013) · Chemical Communications · doi:10.1039/c3cc38009b · Cited by 376
Wei, S., Zhang, H., Huang, Y., Wang, W., Xia, Y., & Yu, Z. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00505c · Cited by 350
Jiang, J., Zhu, J., Ai, W., Fan, Z., Shen, X., Zou, C., Liu, J., Zhang, H., & Yu, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00602j · Cited by 323
Zhang, J., Xiang, J., Dong, Z., Liu, Y., Wu, Y., Xu, C., & Du, G. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.035 · Cited by 288
A Solid Sulfur Cathode for Aqueous Batteries
Peramunage, D., & Licht, S. L. (1993) · Science · doi:10.1126/science.261.5124.1029 · Cited by 285
Huang, J.-Q., Liu, X.-F., Zhang, Q., Chen, C.-M., Zhao, M.-Q., Zhang, S.-M., Zhu, W., Qian, W.-Z., & Wei, F. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.10.003 · Cited by 254
Self-citationZhang, K., Zhao, Q., Tao, Z., & Chen, J. (2013) · Nano Research · doi:10.1007/s12274-012-0279-1 · Cited by 241
Ahn, W., Kim, K.-B., Jung, K.-N., Shin, K.-H., & Jin, C.-S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.074 · Cited by 230
Ding, B., Yuan, C., Shen, L., Xu, G., Nie, P., & Zhang, X. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201202127 · Cited by 223
Tao, X., Chen, X., Xia, Y., Huang, H., Gan, Y., Wu, R., Chen, F., & zhang, W. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01213h · Cited by 212
A novel porous nanocomposite of sulfur/carbon obtained from fish scales for lithium–sulfur batteries
Zhao, S., Li, C., Wang, W., Zhang, H., Gao, M., Xiong, X., Wang, A., Yuan, K., Huang, Y., & Wang, F. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta01220d · Cited by 190
Gas-phase elemental mercury removal by novel carbon-based sorbents
Tan, Z., Sun, L., Xiang, J., Zeng, H., Liu, Z., Hu, S., & Qiu, J. (2012) · Carbon · doi:10.1016/j.carbon.2011.08.036 · Cited by 178
Self-citationChung, S., & Manthiram, A. (2014) · ChemSusChem · doi:10.1002/cssc.201301287 · Cited by 137
Lithium–sulfur batteries with activated carbons derived from olive stones
Moreno, N., Caballero, Á., Hernan, L., & Morales, J. (2014) · Carbon · doi:10.1016/j.carbon.2014.01.002 · Cited by 134
Bio-inspired fabrication of carbon nanotiles for high performance cathode of Li–S batteries
Tao, X., Zhang, J., Xia, Y., Huang, H., Du, J., Xiao, H., Zhang, W., & Gan, Y. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta14113f · Cited by 108
Zhou, X., Li, L., Dong, S., Chen, X., Han, P., Xu, H., Yao, J., Shang, C., Liu, Z., & Cui, G. (2011) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-011-1435-3 · Cited by 99
Wang, W., Wang, X., Tian, L. Y., Wang, Y., & Ye, S. H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta14459c · Cited by 98
Self-citation
Cited by
Tan, X.-F., Liu, S.-B., Liu, Y.-G., Gu, Y.-L., Zeng, G.-M., Hu, X.-J., Wang, X., Liu, S.-H., & Jiang, L.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.12.083 · Cited by 711
Biomass derived porous carbon for CO2 capture
Singh, G., Lakhi, K. S., Sil, S., Bhosale, S. V., Kim, I., Albahily, K., & Vinu, A. (2019) · Carbon · doi:10.1016/j.carbon.2019.03.050 · Cited by 555
Biomass-derived renewable carbon materials for electrochemical energy storage
Gao, Z., Zhang, Y., Song, N., & Li, X. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1250834 · Cited by 551
Nanostructured Anode Materials for Lithium Ion Batteries: Progress, Challenge and Perspective
Mahmood, N., Tang, T., & Hou, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600374 · Cited by 514
Self-citationDutta, A., Mitra, S., Basak, M., & Banerjee, T. (2023) · Energy Storage · doi:10.1002/est2.339 · Cited by 472
Metadata
- Authors
- Gu, X., Wang, Y., Lai, C., Qiu, J., Li, S., Hou, Y., Martens, W., Mahmood, N., & Zhang, S.
- Venue
- Nano Research
- Publisher
- Tsinghua University Press
- Published
- 2014-11-07
- Volume
- 8
- Issue
- 1
- Pages
- 129-139
- ISSN
- 1998-0000 (ISSN-L)
- 1998-0124
- OpenAlex
- W1979323697
- Cited by
- 320
- References
- 29
- FWCI
- 14.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.