The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Electrical bearing failures in electric vehicles
Open accessAbstract
In modern electric equipment, especially electric vehicles, inverter control systems can lead to complex shaft voltages and bearing currents. Within an electric motor, many parts have electrical failure problems, and among which bearings are the most sensitive and vulnerable components. In recent years, electrical failures in bearing have been frequently reported in electric vehicles, and the electrical failure of bearings has become a key issue that restricts the lifetime of all-electric motor-based power systems in a broader sense. The purpose of this review is to provide a comprehensive overview of the bearing premature failure in the mechanical systems exposed in an electrical environment represented by electric vehicles. The electrical environments in which bearing works including the different components and the origins of the shaft voltages and bearing currents, as well as the typical modes of electrical bearing failure including various topographical damages and lubrication failures, have been discussed. The fundamental influence mechanisms of voltage/current on the friction/lubrication properties have been summarized and analyzed, and corresponding countermeasures have been proposed. Finally, a brief introduction to the key technical flaws in the current researches will be made and the future outlook of frontier directions will be discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrowetting: from basics to applications
Mugele, F., & Baret, J.-C. (2005) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/17/28/r01 · Cited by 2,092
Electric Vehicle Technology Explained
Larminie, J., & Lowry, J. (2012) · doi:10.1002/9781118361146 · Cited by 1,384
A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
Yong, J. Y., Ramachandaramurthy, V. K., Tan, K. M., & Mithulananthan, N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.130 · Cited by 1,081
Electric contacts; theory and application
Holm, R. (1967) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,049
Electric, Hybrid, and Fuel-Cell Vehicles: Architectures and Modeling
Chan, C. C., Bouscayrol, A., & Chen, K. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2033605 · Cited by 792
Effect of PWM inverters on AC motor bearing currents and shaft voltages
Erdman, J. M., Kerkman, R. J., Schlegel, D. W., & Skibinski, G. L. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.491472 · Cited by 738
A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2090839 · Cited by 706
A survey of condition monitoring and protection methods for medium voltage induction motors
Zhang, P., Du, Y., Habetler, T. G., & Lu, B. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316083 · Cited by 524
Habib, S., Khan, M. M., Abbas, F., Sang, L., Shahid, M. U., & Tang, H. (2018) · IEEE Access · doi:10.1109/access.2018.2812303 · Cited by 416
Aggregated Impact of Plug-in Hybrid Electric Vehicles on Electricity Demand Profile
Darabi, Z., & Ferdowsi, M. (2011) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2011.2158123 · Cited by 405
The Market for Electric Vehicles: Indirect Network Effects and Policy Design
Li, S., Tong, L., Xing, J., & Zhou, Y. (2017) · Journal of the Association of Environmental and Resource Economists · doi:10.1086/689702 · Cited by 393
Amjad, S., Neelakrishnan, S., & Rudramoorthy, R. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.001 · Cited by 387
Induction machine drive condition monitoring and diagnostic research—a survey
Singh, G. K., & Ahmed Saleh Al Kazzaz, S. (2003) · Electric Power Systems Research · doi:10.1016/s0378-7796(02)00172-4 · Cited by 362
Pelletier, S., Jabali, O., & Laporte, G. (2016) · Transportation Science · doi:10.1287/trsc.2015.0646 · Cited by 314
Realizing the electric-vehicle revolution
Tran, M., Banister, D., Bishop, J. D. K., & McCulloch, M. D. (2012) · Nature Climate Change · doi:10.1038/nclimate1429 · Cited by 312
Fundamental Aspects of Energy Dissipation in Friction
Park, J. Y., & Salmeron, M. (2014) · Chemical Reviews · doi:10.1021/cr200431y · Cited by 272
A Comparative Study of Power Supply Architectures in Wireless EV Charging Systems
Esteban, B., Sid-Ahmed, M., & Kar, N. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2440256 · Cited by 256
System electrical parameters and their effects on bearing currents
Busse, D., Erdman, J., Kerkman, R. J., Schlegel, D., & Skibinski, G. (1997) · IEEE Transactions on Industry Applications · doi:10.1109/28.568025 · Cited by 250
Development scheme and key technology of an electric vehicle: An overview
Kumar, M. S., & Revankar, S. T. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.027 · Cited by 236
Sweeney, J., Hausen, F., Hayes, R., Webber, G. B., Endres, F., Rutland, M. W., Bennewitz, R., & Atkin, R. (2012) · Physical Review Letters · doi:10.1103/physrevlett.109.155502 · Cited by 235
Electronic Control of Friction in Silicon pn Junctions
Park, J. Y., Ogletree, D. F., Thiel, P. A., & Salmeron, M. (2006) · Science · doi:10.1126/science.1125017 · Cited by 219
AC Motor Control and Electrical Vehicle Applications
Neapolitan, R. E., & Hee Nam, K. (2018) · CRC Press eBooks · doi:10.1201/9781315200149 · Cited by 165
A survey on comparison of electric motor types and drives used for electric vehicles
Yıldırım, M., Polat, M., & Kürüm, H. (2014) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2014.6980715 · Cited by 152
Medium-Voltage Drives: Challenges and existing technology
Abu‐Rub, H., Bayhan, S., Moinoddin, S., Malinowski, M., & Guziński, J. (2016) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2016.2551802 · Cited by 144
Breaking of an Emulsion under an ac Electric Field
Thiam, A. R., Brémond, N., & Bibette, J. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.188304 · Cited by 139
Film thickness in a grease lubricated ball bearing
Cen, H., & Lugt, P. M. (2019) · Tribology International · doi:10.1016/j.triboint.2019.01.032 · Cited by 133
Load shift potential of electric vehicles in Europe
Babrowski, S., Heinrichs, H., Jochem, P., & Fichtner, W. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.019 · Cited by 120
McHale, G., Orme, B. V., Wells, G. G., & Ledesma‐Aguilar, R. (2019) · Langmuir · doi:10.1021/acs.langmuir.8b04136 · Cited by 117
Battery electric vehicles: Looking behind to move forward
Safari, M. (2018) · Energy Policy · doi:10.1016/j.enpol.2017.12.053 · Cited by 116
Fajardo, O. Y., Bresme, F., Kornyshev, A. A., & Urbakh, M. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01802 · Cited by 114
Thin film lubrication in the past 20 years
Ma, L., & Luo, J. (2016) · Friction · doi:10.1007/s40544-016-0135-5 · Cited by 113
Self-citationLubrication under charged conditions
Xie, G., Guo, D., & Luo, J. (2014) · Tribology International · doi:10.1016/j.triboint.2014.11.018 · Cited by 101
Self-citationA Review of Shaft Voltages and Bearing Currents in EV and HEV Motors
Hadden, T., Jiang, J. W., Bilgin, B., Yang, Y., Sathyan, A., Dadkhah, H., & Emadi, A. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793357 · Cited by 97
Ultralow friction polymer composites incorporated with monodispersed oil microcapsules
Zhang, L., Xie, G., Wu, S., Peng, S., Zhang, X., Guo, D., Wen, S., & Luo, J. (2019) · Friction · doi:10.1007/s40544-019-0312-4 · Cited by 93
Self-citationPopa, M. E., Vollmer, M. K., Jordan, A., et al. (2014) · Atmospheric chemistry and physics · doi:10.5194/acp-14-2105-2014 · Cited by 90
Investigation of influence of bearing load and bearing temperature on EDM bearing currents
Magdun, O., Gemeinder, Y., & Binder, A. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5618061 · Cited by 89
Electric-Field-Induced Friction Reduction and Control
Drummond, C. (2012) · Physical Review Letters · doi:10.1103/physrevlett.109.154302 · Cited by 86
High efficiency SiC traction inverter for electric vehicle applications
Zhu, J., Kim, H., Chen, H., Erickson, R. W., & Maksimović, D. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341204 · Cited by 78
Tribotronic control of friction in oil-based lubricants with ionic liquid additives
Cooper, P. K., Li, H., Rutland, M. W., Webber, G. B., & Atkin, R. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp04405k · Cited by 68
Influence of carrier density on the friction properties of silicon pn junctions
Park, J. Y., Qi, Y., Ogletree, D. F., Thiel, P. A., & Salmerón, M. (2007) · Physical Review B · doi:10.1103/physrevb.76.064108 · Cited by 67
Asefi, M., & Nazarzadeh, J. (2017) · IET Electrical Systems in Transportation · doi:10.1049/iet-est.2016.0051 · Cited by 64
The Effect of AC Frequency on the Electrowetting Behavior of Ionic Liquids
Nanayakkara, Y. S., Perera, S., Bindiganavale, G. S., Wanigasekara, E., Moon, H., & Armstrong, D. W. (2010) · Analytical Chemistry · doi:10.1021/ac9021852 · Cited by 63
Nippes, P. I. (2004) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.827471 · Cited by 63
Surface-modified Pd nanoparticles as a superior additive for lubrication
Kołodziejczyk, Ł., Martínez-Martínez, D., Rojas, T. C., Fernández, A., & Sánchez-López, J. C. (2006) · Journal of Nanoparticle Research · doi:10.1007/s11051-006-9124-3 · Cited by 62
Detection of lubrication starved bearings in electrical motors by means of vibration analysis
Boškoski, P., Petrovc̆ic̆, J., Musizza, B., & Juričić, Đ. (2010) · Tribology International · doi:10.1016/j.triboint.2010.03.018 · Cited by 42
Li, Y., Zhang, H., Wu, B., & Guo, Z. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.07.054 · Cited by 42
Boundary layer friction of solvate ionic liquids as a function of potential
Li, H., Rutland, M. W., Watanabe, M., & Atkin, R. (2017) · Faraday Discussions · doi:10.1039/c6fd00236f · Cited by 41
Arora, T. G., Renge, M. M., & Aware, M. V. (2017) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2017.8282911 · Cited by 40
A review on electric vehicles and their interaction with smart grids: the case of Brazil
Teixeira, A. C. R., da Silva, D. L., Neto, L. D. V. B. M., Diniz, A. S. A. C., & Sodré, J. R. (2014) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-014-0865-x · Cited by 39
Prediction of motor bearing currents for converter operation
Kriese, M., Wittek, E., Gattermann, S., Tischmacher, H., Poll, G., & Ponick, B. (2010) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2010.5608127 · Cited by 32
Electrostatic discharge issues in electric vehicles
Krein, P. T. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.556629 · Cited by 27
Wang, J., Li, J., Li, C., et al. (2015) · Tribology Letters · doi:10.1007/s11249-015-0624-0 · Cited by 27
Tribological behavior of a charged atomic force microscope tip on graphene oxide films
Jiang, Y., Li, Y., Liang, B., Yang, X., Han, T., & Wang, Z. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/49/495703 · Cited by 25
The new full electric drivetrain of the Audi e-tron
Doerr, J., Ardey, N., Mendl, G., Fröhlich, G., Straßer, R., & Laudenbach, T. (2019) · Proceedings · doi:10.1007/978-3-658-26056-9_2 · Cited by 25
Rind, S. J., Ren, Y., & Jiang, L. (2014) · International Universities Power Engineering Conference (UPEC) · doi:10.1109/upec.2014.6934646 · Cited by 19
Xie, G., Luo, J., Liu, S., Guo, D., & Zhang, C. (2011) · Journal of Applied Physics · doi:10.1063/1.3587477 · Cited by 15
Self-citationThe effect of applied voltage on the frictional behaviour of carbon black filled elastomers
Hurricks, P. L. (1979) · Wear · doi:10.1016/0043-1648(79)90073-5 · Cited by 12
Optimal Design of an AC Filtering Inductor for a 3-Phase PWM Inverter Including Saturation Effect
Voldoire, A., Schanen, J., Ferrieux, J. P., Gautier, C., & Saber, C. (2019) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2019.8697246 · Cited by 6
A Generic Mechanism of Sliding Friction between Charged Soft Surfaces
Herminghaus, S. (2005) · Physical Review Letters · doi:10.1103/physrevlett.95.264301 · Cited by 4
EV and PHEV Battery Technologies
Williamson, S. S. (2013) · Springer eBooks · doi:10.1007/978-1-4614-7711-2_5 · Cited by 3
Cited by
Electrical bearing damage, a problem in the nano- and macro-range
Schneider, V., Behrendt, C., Höltje, P., Cornel, D., Becker-Dombrowsky, F. M., Puchtler, S., Gutiérrez Guzmán, F., Ponick, B., Jacobs, G., & Kirchner, E. (2022) · Lubricants · doi:10.3390/lubricants10080194 · Cited by 74
Gonda, A., Paulus, S., Graf, S., Koch, O., Götz, S., & Sauer, B. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109354 · Cited by 23
Metadata
- Authors
- He, F., Xie, G., & Luo, J.
- Venue
- Friction
- Publisher
- Tsinghua University Press
- Published
- 2020-01-23
- Volume
- 8
- Issue
- 1
- Pages
- 4-28
- ISSN
- 2223-7690 (ISSN-L)
- 2223-7704
- OpenAlex
- W3002612285
- Cited by
- 303
- References
- 60
- FWCI
- 7.43
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.