Fibers reinforced composite hydrogels with improved lubrication and load-bearing capacity
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Hydrogels as one kind of soft materials with a typical three-dimensional (3D) hydrophilic network have been getting great attention in the field of biolubrication. However, traditional hydrogels commonly show poor tribology performance under high-load conditions because of their poor mechanical strength and toughness. Herein, pure chemical-crosslinking hydrogels mixed with different types of the micron-scale fibers can meet the requirements of strength and toughness for biolubrication materials, meanwhile the corresponding tribology performance improves significantly. In a typical case, three kinds of reinforcement matrix including needle-punched fibers, alginate fibers, and cottons are separately combined with Poly( n -vinyl pyrrolidone)-poly(2-hydroxyethyl methacrylate (PVP-PHEMA) hydrogels to prepare fibers reinforced composite hydrogels. The experimental results show that the mechanical properties of fibers reinforced composite hydrogels improve greatly comparable with pure PVP-PHEMA hydrogels. Among three kinds of fibers reinforced composite hydrogel, the as-prepared composite hydrogels reinforced with needle-punched fibers possess the best strength, modulus, and anti-tearing properties. Friction tests indicate that the fibers reinforced composite hydrogels demonstrate stable water-lubrication performance comparable with pure PVP-PHEMA hydrogels. Besides, the hydrogel-spunlace fiber samples show the best load-bearing and anti-wear capacities. The improved tribology performance of the composite hydrogels is highly related to mechanical property and the interaction between the fibers and hydrogel network. Finally, spunlace fibers reinforced hydrogel materials with high load-bearing and low friction properties are expected to be used as novel biomimetic lubrication materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Similar behavior was reported by various research groups suggesting adding fiber improves the scaffold’s mechanical strength and that a higher density of fiber content in the hydrogel yielded high strength [29, 38–41].”
From Development of silk microfiber-reinforced bioink for muscle tissue engineering and in situ printing by a handheld 3D printer (2025) · cites this paper as [39]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogels for Tissue Engineering
Lee, K. Y., & Mooney, D. J. (2001) · Chemical Reviews · doi:10.1021/cr000108x · Cited by 5,277
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Physical hydrogels composed of polyampholytes demonstrate high toughness and viscoelasticity
Sun, T. L., Kurokawa, T., Kuroda, S., Ihsan, A. B., Akasaki, T., Sato, K., Haque, M. A., Nakajima, T., & Gong, J. P. (2013) · Nature Materials · doi:10.1038/nmat3713 · Cited by 2,089
Lin, P., Ma, S., Wang, X., & Zhou, F. (2015) · Advanced Materials · doi:10.1002/adma.201405022 · Cited by 915
Self-citationMoutos, F. T., Freed, L. E., & Guilak, F. (2007) · Nature Materials · doi:10.1038/nmat1822 · Cited by 738
Weak Hydrogen Bonding Enables Hard, Strong, Tough, and Elastic Hydrogels
Hu, X., Vatankhah‐Varnoosfaderani, M., Zhou, J., Li, Q., & Sheiko, S. S. (2015) · Advanced Materials · doi:10.1002/adma.201503724 · Cited by 596
Zhao, D., Huang, J., Zhong, Y., Li, K., Zhang, L., & Cai, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601645 · Cited by 539
Stiff, strong, and tough hydrogels with good chemical stability
Li, J., Suo, Z., & Vlassak, J. J. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb01194e · Cited by 381
Self-citationFracture toughness of hydrogels: measurement and interpretation
Long, R., & Hui, C.-Y. (2016) · Soft Matter · doi:10.1039/c6sm01694d · Cited by 303
Synthesis of Hydrogels with Extremely Low Surface Friction
Gong, J. P., Kurokawa, T., Narita, T., Kagata, G., Osada, Y., Nishimura, G., & Kinjo, M. (2001) · Journal of the American Chemical Society · doi:10.1021/ja003794q · Cited by 276
Liao, I., Moutos, F. T., Estes, B. T., Zhao, X., & Guilak, F. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300483 · Cited by 276
Mechanically Strong Hydrogels with Ultra‐Low Frictional Coefficients
Kaneko, D., Tada, T., Kurokawa, T., Gong, J. P., & Osada, Y. (2005) · Advanced Materials · doi:10.1002/adma.200400739 · Cited by 195
Molecularly engineered p(HEMA)-based hydrogels for implant biochip biocompatibility
Abraham, S., Brahim, S., Ishihara, K., & Guiseppi-Elie, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.01.031 · Cited by 180
Energy‐Dissipative Matrices Enable Synergistic Toughening in Fiber Reinforced Soft Composites
Huang, Y., King, D. R., Sun, T. L., Nonoyama, T., Kurokawa, T., Nakajima, T., & Gong, J. P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605350 · Cited by 179
Xiang, Y., Peng, Z., & Chen, D. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.04.003 · Cited by 170
Ma, S., Yu, B., Pei, X., & Zhou, F. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.053 · Cited by 159
Self-citationExtremely tough composites from fabric reinforced polyampholyte hydrogels
King, D. R., Sun, T. L., Huang, Y., Kurokawa, T., Nonoyama, T., Crosby, A. J., & Gong, J. P. (2015) · Materials Horizons · doi:10.1039/c5mh00127g · Cited by 146
Liu, G., Liu, Z., Li, N., Wang, X., Zhou, F., & Liu, W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506026e · Cited by 142
Self-citationPeng, L., Zhang, R., Wang, X., Cai, M., Yang, J. F., Yu, B., & Zhou, F. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00674 · Cited by 134
Self-citationHigh-strength, ultra-thin and fiber-reinforced pHEMA artificial skin
Young, C.-D., Wu, J., & Tsou, T. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00083-0 · Cited by 122
Bioinspired Imprinted PHEMA-Hydrogels for Ocular Delivery of Carbonic Anhydrase Inhibitor Drugs
Ribeiro, A., Veiga, F., Santos, D., Torres-Labandeira, J. J., Concheiro, A., & Alvarez-Lorenzo, C. (2011) · Biomacromolecules · doi:10.1021/bm101562v · Cited by 121
A tough double network hydrogel for cartilage tissue engineering
Fan, C., Liao, L., Zhang, C., & Liu, L. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20600a · Cited by 93
Yi, X., He, J., Wang, X., Zhang, Y., Tan, G., Zhou, Z., Chen, J., Chen, D., Wang, R., Tian, W., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18821 · Cited by 93
Friction characteristics of a potential articular cartilage biomaterial
Covert, R. J., Ott, R., & Ku, D. N. (2003) · Wear · doi:10.1016/s0043-1648(03)00113-3 · Cited by 85
Development and evaluation of fast forming nano-composite hydrogel for ocular delivery of diclofenac
Li, X., Zhang, Z., & Chen, H. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.03.024 · Cited by 81
Pan, Y., & Xiong, D. (2008) · Wear · doi:10.1016/j.wear.2008.08.012 · Cited by 81
Pan, Y., & Xiong, D. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3679-8 · Cited by 79
Tuning the Tribological Property with Thermal Sensitive Microgels for Aqueous Lubrication
Liu, G., Wang, X., Zhou, F., & Liu, W. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403041r · Cited by 75
Self-citationStudy on the tribological properties of pHEMA hydrogels for use in artificial articular cartilage
Bavaresco, V. P., Zavaglia, C. A. C., Reis, M. C., & Gomes, J. R. (2007) · Wear · doi:10.1016/j.wear.2007.10.009 · Cited by 62
Huang, Y., King, D. R., Cui, W. L., Sun, T. L., Guo, H., Kurokawa, T., Brown, H. R., Hui, C., & Gong, J. P. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta02326g · Cited by 62
Casadio, Y. S., Brown, D. H., Chirila, T. V., Kraatz, H.-B., & Baker, M. V. (2010) · Biomacromolecules · doi:10.1021/bm100756c · Cited by 56
Liu, G., Cai, M., Wang, X., Zhou, F., & Liu, W. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.5b00860 · Cited by 41
Self-citationLiu, G., Cai, M., Feng, Y., Wang, X., Zhou, F., & Liu, W. (2016) · Chemical Communications · doi:10.1039/c5cc09954d · Cited by 33
Self-citationChen, C., Dong, A., Yang, J., & Deng, L. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6075-6 · Cited by 29
Huang, J., Liu, G., Song, C., Saiz, E., & Tomsia, A. P. (2012) · Chemistry of Materials · doi:10.1021/cm203764f · Cited by 27
Marambio, O. G., Pizarro, G. D. C., Jeria‐Orell, M., & Geckeler, K. E. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29944 · Cited by 11
Cited by
Wang, Y., Zhai, W., Cheng, S., Li, J., & Zhang, H. (2023) · Friction · doi:10.1007/s40544-022-0710-x · Cited by 216
“[94] Li J, Gao L, Xu R, Ma S, Ma Z, Liu Y, Wu Y, Feng L, Cai M, Zhou F.”
BackgroundSelf-citationHydrogel scaffolds in bone regeneration: Their promising roles in angiogenesis
Liu, J., Yang, L., Liu, K., & Gao, F. (2023) · Frontiers in Pharmacology · doi:10.3389/fphar.2023.1050954 · Cited by 109
Chen, Q., Zhang, X., Chen, K., Feng, C., Wang, D., Qi, J., Li, X., Zhao, X., Chai, Z., & Zhang, D. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c13641 · Cited by 86
Bausch, B., Frankl, S. D., Becher, D., Menz, F., Baier, T., Bauer, M., Böse, O., & Hölzle, M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106841 · Cited by 63
Najihah, A. Z., Hassan, M. Z., & Ismail, Z. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132411 · Cited by 44
Metadata
- Authors
- Li, J., Gao, L., Xu, R., Ma, S., Ma, Z., Liu, Y., Wu, Y., Feng, L., Cai, M., & Zhou, F.
- Affiliations
- Chinese Academy of Sciences (CN)
- Lanzhou Jiaotong University (CN)
- Corresponding author
- Ma, Shuanhong
- Wu, Yang
- ORCID
- Venue
- Friction
- Publisher
- Tsinghua University Press
- Published
- 2020-10-21
- Volume
- 10
- Issue
- 1
- Pages
- 54-67
- ISSN
- 2223-7690 (ISSN-L)
- 2223-7704
- OpenAlex
- W3094356667
- Cited by
- 57
- References
- 36
- Citations by year
- 2026: 11 · 2025: 9 · 2024: 14 · 2023: 13 · 2022: 7 · 2021: 3
- FWCI
- 1.92
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Friction (publishedVersion, cc-by)
- Lanzhou University Institutional Repository (submittedVersion)
- Funders
- China Association for Science and Technology (2017QNRC0181)
- National Natural Science Foundation of China (51705507, 51828302, 51805514)
- Chinese Academy of Sciences (QYZDY-SSW-JSC013)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Mechanics of Materials › Tribology and Wear Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Keywords
- fiber-reinforced hydrogels, composite hydrogels, biolubrication, tribology, alginate fibers, cotton fiber, chemical crosslinking, mechanical strength, bearing capacity, anti-wear, water lubrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.