The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Solvometallurgy: An Emerging Branch of Extractive Metallurgy
Open accessAbstract
This position paper introduces the reader to the concept of solvometallurgy, the term used to describe the extraction of metals from ores, industrial process residues, production scrap, and urban waste using non-aqueous solutions. Here, non-aqueous is not used to imply anhydrous, but rather a low water content. The unit operations are as follows: solvent leaching; separation of the residue; purification of the leach solution by non-aqueous solvent extraction or non-aqueous ion exchange; and metal recovery by precipitation or electrolysis in non-aqueous electrolytes. Solvometallurgy is similar to hydrometallurgy in that both the branches of extractive metallurgy use low-temperature processes, but with solvometallurgy, there is no discrete water phase. Both branches use organic or inorganic solvents (excluding water in the case of solvometallurgy). However, for solvometallurgical processes to be sustainable, they must be based on green solvents, which means that all toxic or environmentally harmful solvents must be avoided. Solvometallurgy is complementary to pyrometallurgy and hydrometallurgy, but this new approach offers several advantages. First, the consumption of water is very limited, and so the generation of wastewater can be avoided. Second, the leaching and solvent extraction can be combined to form a single step, resulting in more simplified process flow sheets. Third, solvent leaching is often more selective than leaching with acidic aqueous solutions, leading to reduced acid consumption and fewer purification steps. Fourth, solvometallurgy is useful for the treatment of ores rich in soluble silica (e.g., eudialyte) because no silica gel is formed. In short, solvometallurgy is in a position to help develop the near-zero-waste metallurgical processes, and with levels of energy consumption that are much lower than those with the high-temperature processes. The Technology Readiness Level (TRL) of this emerging branch of extractive metallurgy is still low (TRL = 3–4), which is a disadvantage for short-term implementation, but offers a great opportunity for further research, development, and innovation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Room-Temperature Ionic Liquids: Solvents for Synthesis and Catalysis. 2
Hallett, J. P., & Welton, T. (2011) · Chemical Reviews · doi:10.1021/cr1003248 · Cited by 12,578
Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis
Welton, T. (1999) · Chemical Reviews · doi:10.1021/cr980032t · Cited by 11,852
Deep Eutectic Solvents (DESs) and Their Applications
Smith, E. L., Abbott, A. P., & Ryder, K. S. (2014) · Chemical Reviews · doi:10.1021/cr300162p · Cited by 7,378
Solvents and Solvent Effects in Organic Chemistry
Reichardt, C. (2002) · Wiley eBooks · doi:10.1002/3527601791 · Cited by 5,789
Abbott, A. P., Capper, G., Davies, D. L., Rasheed, R. K., & Tambyrajah, V. (2003) · Chemical Communications · doi:10.1039/b210714g · Cited by 5,738
Applications of ionic liquids in the chemical industry
Plechkova, N. V., & Seddon, K. R. (2008) · Chem. Soc. Rev. · doi:10.1039/b006677j · Cited by 5,686
Deep eutectic solvents: syntheses, properties and applications
Zhang, Q., De Oliveira Vigier, K., Royer, S., & Jérôme, F. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35178a · Cited by 4,899 · cited 1×
“A cheap alternative to ionic liquids are the deep-eutectic solvents (DESs) [22, 29, 89, 90], of which there are many different types.”
BackgroundAbbott, A. P., Boothby, D., Capper, G., Davies, D. L., & Rasheed, R. K. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048266j · Cited by 4,340 · cited 2×
“A cheap alternative to ionic liquids are the deep-eutectic solvents (DESs) [22, 29, 89, 90], of which there are many different types.”
BackgroundReview of biodiesel composition, properties, and specifications
Hoekman, S. K., Broch, A., Robbins, C., Ceniceros, E., & Natarajan, M. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.143 · Cited by 2,010
Molecular Separation with Organic Solvent Nanofiltration: A Critical Review
Marchetti, P., Jimenez Solomon, M. F., Szekely, G., & Livingston, A. G. (2014) · Chemical Reviews · doi:10.1021/cr500006j · Cited by 1,758
Singh, S. P., & Singh, D. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.017 · Cited by 1,386
Henderson, R. K., Jiménez-González, C., Constable, D. J. C., Alston, S. R., Inglis, G. G. A., Fisher, G., Sherwood, J., Binks, S. P., & Curzons, A. D. (2011) · Green Chemistry · doi:10.1039/c0gc00918k · Cited by 1,140
Green chemistry tools to influence a medicinal chemistry and research chemistry based organisation
Alfonsi, K., Colberg, J., Dunn, P. J., Fevig, T., Jennings, S., Johnson, T. A., Kleine, H. P., Knight, C., Nagy, M. A., Perry, D. A., et al. (2008) · Green Chem. · doi:10.1039/b711717e · Cited by 1,124
Jessop, P. G. (2011) · Green Chemistry · doi:10.1039/c0gc00797h · Cited by 1,060
H. Davis, J. (2004) · Chemistry Letters · doi:10.1246/cl.2004.1072 · Cited by 1,053
Updating and further expanding GSK's solvent sustainability guide
Alder, C. M., Hayler, J. D., Henderson, R. K., Redman, A. M., Shukla, L., Shuster, L. E., & Sneddon, H. F. (2016) · Green Chemistry · doi:10.1039/c6gc00611f · Cited by 1,041
Application of ionic liquids to the electrodeposition of metals
Abbott, A. P., & McKenzie, K. J. (2006) · Physical Chemistry Chemical Physics · doi:10.1039/b607329h · Cited by 817
Electrodeposition from Ionic Liquids
(2008) · Wiley eBooks · doi:10.1002/9783527622917 · Cited by 804
Solubility of Metal Oxides in Deep Eutectic Solvents Based on Choline Chloride
Abbott, A. P., Capper, G., Davies, D. L., McKenzie, K. J., & Obi, S. U. (2006) · Journal of Chemical & Engineering Data · doi:10.1021/je060038c · Cited by 769
Solvent extraction principles and practice
Rydberg, J. (2004) · M. Dekker eBooks · Cited by 692
Ionic Liquids: Solvents for the Electrodeposition of Metals and Semiconductors
Endres, F. (2002) · ChemPhysChem · doi:10.1002/1439-7641(20020215)3:2<144::aid-cphc144>3.0.co;2-# · Cited by 674
Lanthanides and Actinides in Ionic Liquids
Binnemans, K. (2007) · Chemical Reviews · doi:10.1021/cr050979c · Cited by 672
Self-citation(1997) · Wiley-VCH eBooks · Cited by 639
Binnemans, K., Jones, P. T., Blanpain, B., Van Gerven, T., & Pontikes, Y. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.089 · Cited by 625
Self-citationGlycerol as a sustainable solvent for green chemistry
Gu, Y., & Jérôme, F. (2010) · Green Chemistry · doi:10.1039/c001628d · Cited by 603
Biodegradation studies of ionic liquids
Coleman, D., & Gathergood, N. (2010) · Chemical Society Reviews · doi:10.1039/b817717c · Cited by 561
Solvent Extraction Principles and Practice, Revised and Expanded
(2004) · CRC Press eBooks · doi:10.1201/9780203021460 · Cited by 482
Task-Specific Ionic Liquid for Solubilizing Metal Oxides
Nockemann, P., Thijs, B., Pittois, S., Thoen, J., Glorieux, C., Van Hecke, K., Van Meervelt, L., Kirchner, B., & Binnemans, K. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0642995 · Cited by 457
Self-citationIonic Liquid Analogues Formed from Hydrated Metal Salts
Abbott, A. P., Capper, G., Davies, D. L., & Rasheed, R. K. (2004) · Chemistry – A European Journal · doi:10.1002/chem.200400127 · Cited by 431
Gas-to-liquids (GTL): A review of an industry offering several routes for monetizing natural gas
Wood, D. A., Nwaoha, C., & Towler, B. F. (2012) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2012.07.001 · Cited by 420
Solvents and sustainable chemistry
Welton, T. (2015) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2015.0502 · Cited by 412
Environmental benefits of methanesulfonic acid
Gernon, M. D., Wu, M., Buszta, T., & Janney, P. (1999) · Green Chemistry · doi:10.1039/a900157c · Cited by 403
Selective Extraction of Metals from Mixed Oxide Matrixes Using Choline-Based Ionic Liquids
Abbott, A. P., Capper, G., Davies, D. L., Rasheed, R. K., & Shikotra, P. (2005) · Inorganic Chemistry · doi:10.1021/ic0505450 · Cited by 354
Carboxyl-Functionalized Task-Specific Ionic Liquids for Solubilizing Metal Oxides
Nockemann, P., Thijs, B., Parac-Vogt, T. N., Van Hecke, K., Van Meervelt, L., Tinant, B., Hartenbach, I., Schleid, T., Ngan, V. T., Nguyen, M. T., et al. (2008) · Inorganic Chemistry · doi:10.1021/ic801213z · Cited by 250
Self-citationJenkin, G. R. T., Al-Bassam, A. Z. M., Harris, R. C., Abbott, A. P., Smith, D. J., Holwell, D. A., Chapman, R. J., & Stanley, C. J. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2015.09.026 · Cited by 231
Dupont, D., & Binnemans, K. (2015) · Green Chemistry · doi:10.1039/c4gc02107j · Cited by 223
Self-citationIonometallurgy: designer redox properties for metal processing
Abbott, A. P., Frisch, G., Gurman, S. J., Hillman, A. R., Hartley, J., Holyoak, F., & Ryder, K. S. (2011) · Chemical Communications · doi:10.1039/c1cc13616j · Cited by 180
Li, Z., Smith, K. H., & Stevens, G. W. (2016) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2015.07.021 · Cited by 172
Speciation, physical and electrolytic properties of eutectic mixtures based on CrCl3·6H2O and urea
Abbott, A. P., Al-Barzinjy, A. A., Abbott, P. D., Frisch, G., Harris, R. C., Hartley, J., & Ryder, K. S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00057a · Cited by 165
Processing of Electric Arc Furnace Dust using Deep Eutectic Solvents
Abbott, A. P., Collins, J., Dalrymple, I., Harris, R. C., Mistry, R., Qiu, F., Scheirer, J., & Wise, W. R. (2009) · Australian Journal of Chemistry · doi:10.1071/ch08476 · Cited by 160
Application of Ionic Liquids in Hydrometallurgy
Park, J., Jung, Y., Kusumah, P., Lee, J., Kwon, K., & Lee, C. K. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150915320 · Cited by 159
Green solvents from glycerol. Synthesis and physico-chemical properties of alkyl glycerol ethers
García, J. I., García-Marín, H., Mayoral, J. A., & Pérez, P. (2010) · Green Chemistry · doi:10.1039/b923631g · Cited by 158
Leaching behavior of copper from waste printed circuit boards with Brønsted acidic ionic liquid
Huang, J., Chen, M., Chen, H., Chen, S., & Sun, Q. (2013) · Waste Management · doi:10.1016/j.wasman.2013.10.027 · Cited by 157
‘Green’ leaching: recyclable and selective leaching of gold-bearing ore in an ionic liquid
Whitehead, J. A., Lawrance, G. A., & McCluskey, A. (2004) · Green Chemistry · doi:10.1039/b406148a · Cited by 153
Whitehead, J. A., Zhang, J., Pereira, N. G. A., McCluskey, A., & Lawrance, G. A. (2007) · Hydrometallurgy · doi:10.1016/j.hydromet.2007.03.009 · Cited by 147
“Organic Aqua Regia”—Powerful Liquids for Dissolving Noble Metals
Lin, W. J., Zhang, R., Jang, S., Wong, C., & Hong, J. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201001244 · Cited by 130
Application of ionic liquids in hydrometallurgy of nonferrous metals
Tian, G., Li, J., & Hua, Y. (2010) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(09)60171-0 · Cited by 130
COMPOSITION OF CYANEX® 923, CYANEX® 925, CYANEX® 921 AND TOPO
Dziwiński, E. J., & SZYMANOWSKI, J. (1998) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299808934592 · Cited by 122
Wellens, S., Hoogerstraete, T. V., Möller, C., Thijs, B., Luyten, J., & Binnemans, K. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.01.015 · Cited by 111
Self-citationElectrocatalytic recovery of elements from complex mixtures using deep eutectic solvents
Abbott, A. P., Harris, R. C., Holyoak, F., Frisch, G., Hartley, J. M., & Jenkin, G. R. T. (2014) · Green Chemistry · doi:10.1039/c4gc02246g · Cited by 102
Leaching of chalcopyrite with Brønsted acidic ionic liquid
Dong, T., Hua, Y., Zhang, Q., & Zhou, D. (2009) · Hydrometallurgy · doi:10.1016/j.hydromet.2009.06.001 · Cited by 97
A Study on Removal of Rare Earth Elements from U.S. Coal Byproducts by Ion Exchange
Rozelle, P. L., Khadilkar, A. B., Pulati, N., Soundarrajan, N., Klima, M. S., Mosser, M. M., Miller, C. E., & Pisupati, S. V. (2016) · Metallurgical and Materials Transactions E · doi:10.1007/s40553-015-0064-7 · Cited by 79
Separation of cobalt and nickel by solvent extraction with two mutually immiscible ionic liquids
Wellens, S., Thijs, B., Möller, C., & Binnemans, K. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50819f · Cited by 75
Self-citationDupont, D., Raiguel, S., & Binnemans, K. (2015) · Chemical Communications · doi:10.1039/c5cc02731d · Cited by 66
Self-citationProcessing metal oxides using ionic liquids
Abbott, A. P., Capper, G., Davies, D. L., & Shikotra, P. (2006) · Mineral Processing and Extractive Metallurgy Transactions of the Institutions of Mining and Metallurgy Section C · doi:10.1179/174328506x91293 · Cited by 63
Toward greener separations of rare earths: Bifunctional ionic liquid extractants in biodiesel
Liu, Y., Zhu, L., Sun, X., & Chen, J. (2010) · AIChE Journal · doi:10.1002/aic.12149 · Cited by 60
Renewable plant-based soybean oil methyl esters as alternatives to organic solvents
Spear, S. K., Griffin, S. T., Granger, K. S., Huddleston, J. G., & Rogers, R. D. (2007) · Green Chemistry · doi:10.1039/b702329d · Cited by 52
Batchu, N. K., Hoogerstraete, T. V., Banerjee, D., & Binnemans, K. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.10.039 · Cited by 51
Self-citationForeman, M. R. S. J. (2016) · Cogent Chemistry · doi:10.1080/23312009.2016.1139289 · Cited by 39
Metal finishing with ionic liquids: scale-up and pilot plants from IONMET consortium
Smith, E. L., Fullarton, C., Harris, R. C., Saleem, S., Abbott, A. P., & Ryder, K. S. (2010) · Transactions of the IMF · doi:10.1179/174591910x12856686485734 · Cited by 36
Hoogerstraete, T. V., Blockx, J., Coster, H. D., & Binnemans, K. (2015) · Chemistry - A European Journal · doi:10.1002/chem.201500825 · Cited by 22
Self-citationYao, A., & Chu, T. (2013) · Dalton Transactions · doi:10.1039/c3dt32832e · Cited by 19
The application of biodiesel and sec-octylphenoxyacetic acid (CA-12) for the yttrium separation
Wang, W., Yang, H., Liu, Y., Cui, H., & Chen, J. (2011) · Hydrometallurgy · doi:10.1016/j.hydromet.2011.05.010 · Cited by 18
Cited by
Neumann, J., Petranikova, M., Meeus, M., Gamarra, J. D., Younesi, R., Winter, M., & Nowak, S. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102917 · Cited by 805
The Materials Science behind Sustainable Metals and Alloys
Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 526
Peeters, N., Binnemans, K., & Riaño, S. (2020) · Green Chemistry · doi:10.1039/d0gc00940g · Cited by 355
Self-citationThe green solvent: a critical perspective
Winterton, N. (2021) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02188-8 · Cited by 307
Metadata
- Authors
- Binnemans, K., & Jones, P. T.
- Venue
- Journal of Sustainable Metallurgy
- Published
- 2017-04-19
- Volume
- 3
- Issue
- 3
- Pages
- 570-600
- ISSN
- 2199-3823 (ISSN-L)
- 2199-3831
- OpenAlex
- W2606946454
- Cited by
- 340
- References
- 63
- FWCI
- 13.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.