The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy
Open accessAbstract
Laser powder bed fusion (LPBF) additive manufacturing technology is sensitive to variations in powder particle morphology and size distribution. However, the absence of a clear link between the powder characteristics and the LPBF performances complicates the development, selection and quality control of LPBF powder feedstock. In this work, three Ti-6Al-4 V powder lots produced by two different techniques, namely, plasma atomization and gas atomization, were selected and characterized. Following the micro-computed tomography analysis of the powder particles’ morphology, size and density, the flowability of these powder lots was concurrently evaluated using Hall and Gustavsson flowmeters and an FT4 powder rheometer. Using established rheology-based criteria, a figure of merit was proposed to quantify the overall powder suitability for the LPBF process. Next, the same three powder lots were used to 3D-print and post-process a series of testing specimens with different layer thicknesses and build orientations, in order to establish a correlation between the powder characteristics and the geometric and mechanical properties of a final product. This study demonstrates that the use of highly spherical powders with a limited amount of fine particles promotes their flowability and yields LPBF components with improved mechanical and geometric characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Spierings, A. B., Herres, N., & Levy, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124770 · Cited by 614
Characterization of Metal Powders Used for Additive Manufacturing
Slotwinski, J. A., Garboczi, E. J., Stutzman, P. E., Ferraris, C. F., Watson, S. S., & Peltz, M. A. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.018 · Cited by 506
Powders for powder bed fusion: a review
Vock, S., Klöden, B., Kirchner, A., Weißgärber, T., & Kieback, B. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00078-6 · Cited by 500
Campbell, I., Diegel, O., Kowen, J., & Wohlers, T. T. (2018) · ResearchSpace (University of Auckland) · Cited by 377
Characterization and Control of Powder Properties for Additive Manufacturing
Strondl, A., Lyckfeldt, O., Brodin, H., & Ackelid, U. (2015) · JOM · doi:10.1007/s11837-015-1304-0 · Cited by 340
3D FE simulation for temperature evolution in the selective laser sintering process
Kolossov, S., Boillat, É., Glardon, R., Fischer, P., & Locher, M. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2003.10.019 · Cited by 338
Chen, G., Zhao, S. Y., Tan, P., Wang, J., Xiang, C. S., & Tang, H. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.04.013 · Cited by 321
Matsumoto, M., Shiomi, M., Osakada, K., & Abe, F. (2002) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(01)00093-1 · Cited by 307
Monzón, M. D., Ortega, Z., Martínez, A., & Ortega, F. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6334-1 · Cited by 251
Mani, M., Lane, B., Donmez, A., Feng, S., Moylan, S., & Fesperman, R. (2015) · doi:10.6028/nist.ir.8036 · Cited by 242
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
In-situ alloying in laser-based additive manufacturing processes: A critical review
Mosallanejad, M. H., Niroumand, B., Aversa, A., & Saboori, A. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.159567 · Cited by 271
A Review on the Processing of Aero-Turbine Blade Using 3D Print Techniques
Sinha, A., Swain, B., Behera, A., Mallick, P., Samal, S. K., Vishwanatha, H. M., & Behera, A. (2022) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6010016 · Cited by 98
Metadata
- Authors
- Brika, S. E., Letenneur, M., Dion, C. A., & Brailovski, V.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 31
- Pages
- 100929
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2983997499
- Cited by
- 343
- References
- 20
- FWCI
- 19.26
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy. https://app.cochat.ai/papers/10.1016/j.addma.2019.100929
- The paper
- Brika, S. E., Letenneur, M., Dion, C. A., & Brailovski, V. (2020). Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy. Additive Manufacturing. https://doi.org/10.1016/j.addma.2019.100929
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.