The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
A review on the recycling of waste carbon fibre/glass fibre-reinforced composites: fibre recovery, properties and life-cycle analysis
Open accessAbstract
The growing use of carbon and glass fibres has increased awareness about their waste disposal methods. Tonnes of composite waste containing valuable carbon fibres and glass fibres have been cumulating every year from various applications. These composite wastes must be cost-effectively recycled without causing negative environmental impact. This review article presents an overview of the existing methods to recycle the cumulating composite wastes containing carbon fibre and glass fibre, with emphasis on fibre recovery and understanding their retained properties. Carbon and glass fibres are assessed via focused topics, each related to a specific treatment method: mechanical recycling; thermal recycling, including fluidised bed and pyrolysis; chemical recycling and solvolysis using critical conditions. Additionally, a brief analysis of their environmental and economic aspects are discussed, prioritising the methods based on sustainable values. Finally, research gaps are identified to highlight the factors of circular economy and its significant role in closing the life-cycle loop of these valuable fibres into re-manufactured composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Writing narrative literature reviews for peer-reviewed journals: secrets of the trade
Green, B. N., Johnson, C. D., & Adams, A. (2006) · Journal of Chiropractic Medicine · doi:10.1016/s0899-3467(07)60142-6 · Cited by 2,224
Oliveux, G., Dandy, L. O., & Leeke, G. A. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.004 · Cited by 1,287
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Recent advances in carbon-fiber-reinforced thermoplastic composites: A review
Yao, S.-S., Jin, F., Rhee, K. Y., Hui, D., & Park, S. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.12.007 · Cited by 976
Pimenta, S., & Pinho, S. T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.09.019 · Cited by 967
Naqvi, S. R., Prabhakara, H. M., Bramer, E. A., Dierkes, W., Akkerman, R., & Brem, G. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.013 · Cited by 484
Witik, R. A., Teuscher, R., Michaud, V., Ludwig, C., & Månson, J.-A. E. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.02.009 · Cited by 408
Wind turbine blade recycling: Experiences, challenges and possibilities in a circular economy
Jensen, J. P., & Skelton, K. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.08.041 · Cited by 401
Recycling glass fiber thermoplastic composites from wind turbine blades
Cousins, D. S., Suzuki, Y., Murray, R. E., Samaniuk, J. R., & Stebner, A. P. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.286 · Cited by 383
Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water
Piñero-Hernanz, R., Dodds, C., Hyde, J., García-Serna, J., Poliakoff, M., Lester, E., Cocero, M. J., Kingman, S., Pickering, S., & Wong, K. H. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.01.001 · Cited by 366
Successful closed-loop recycling of thermoset composites
Palmer, J., Ghita, O. R., Savage, L., & Evans, K. E. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.02.002 · Cited by 363
Meng, F., Olivetti, E. A., Zhao, Y., Chang, J. C., Pickering, S. J., & McKechnie, J. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01026 · Cited by 323
A new technology for recycling materials from waste printed circuit boards
Zhou, Y., & Qiu, K. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.083 · Cited by 317
Piñero-Hernanz, R., García‐Serna, J., Dodds, C., Hyde, J. R., Poliakoff, M., Cocero, M. J., Kingman, S., Pickering, S. J., & Lester, E. H. (2008) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.02.008 · Cited by 304
JIANG, G., PICKERING, S., LESTER, E., TURNER, T., WONG, K., & WARRIOR, N. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.10.007 · Cited by 271
Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres
Meng, F., McKechnie, J., Turner, T. A., & Pickering, S. J. (2017) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.05.008 · Cited by 259
Morin, C., Loppinet-Serani, A., Cansell, F., & Aymonier, C. (2012) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2012.02.001 · Cited by 246
Bachmann, J., Hidalgo, C., & Bricout, S. (2017) · Science China Technological Sciences · doi:10.1007/s11431-016-9094-y · Cited by 240
Kim, Y. N., Kim, Y.-O., Kim, S. Y., Park, M., Yang, B., Kim, J., & Jung, Y. C. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.01.026 · Cited by 236
Economic and environmental assessment of recovery and disposal pathways for CFRP waste management
Vo Dong, P. A., Azzaro-Pantel, C., & Cadene, A.-L. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.01.024 · Cited by 224
Chemical recycling of glass fiber reinforced epoxy resin cured with amine using nitric acid
Dang, W., Kubouchi, M., Sembokuya, H., & Tsuda, K. (2005) · Polymer · doi:10.1016/j.polymer.2004.12.035 · Cited by 222
Bai, Y., Wang, Z., & Feng, L. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.057 · Cited by 209
Xu, P., Li, J., & Ding, J. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.04.002 · Cited by 208
An Efficient Method of Recycling of CFRP Waste Using Peracetic Acid
Das, M., Chacko, R., & Varughese, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01456 · Cited by 200
Chemical recycling of carbon fiber reinforced plastic using supercritical methanol
Okajima, I., Hiramatsu, M., Shimamura, Y., Awaya, T., & Sako, T. (2014) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2014.04.011 · Cited by 197
Lefeuvre, A., Garnier, S., Jacquemin, L., Pillain, B., & Sonnemann, G. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.06.023 · Cited by 197
Li, J., Xu, P.-L., Zhu, Y.-K., Ding, J.-P., Xue, L.-X., & Wang, Y.-Z. (2012) · Green Chemistry · doi:10.1039/c2gc36294e · Cited by 196
La Rosa, A. D., Banatao, D. R., Pastine, S. J., Latteri, A., & Cicala, G. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.08.015 · Cited by 188
Lefeuvre, A., Garnier, S., Jacquemin, L., Pillain, B., & Sonnemann, G. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.10.008 · Cited by 177
Environmental Aspects of Use of Recycled Carbon Fiber Composites in Automotive Applications
Meng, F., McKechnie, J., Turner, T., Wong, K. H., & Pickering, S. J. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b04069 · Cited by 176
On the successful chemical recycling of carbon fiber/epoxy resin composites under the mild condition
Jiang, J., Deng, G., Chen, X., Gao, X., Guo, Q., Xu, C., & Zhou, L. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.08.007 · Cited by 166
Chemical recycling of glass fibre reinforced composites using subcritical water
Oliveux, G., Bailleul, J.-L., & Salle, E. L. G. L. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.06.008 · Cited by 160
Khalil, Y. F. (2018) · Waste Management · doi:10.1016/j.wasman.2018.03.026 · Cited by 148
Mazzocchetti, L., Benelli, T., D’Angelo, E., Leonardi, C., Zattini, G., & Giorgini, L. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.07.007 · Cited by 148
Recycling of carbon fibre reinforced composites using water in subcritical conditions
Yuyan, L., Guohua, S., & Linghui, M. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.05.030 · Cited by 146
Recycling of fiber reinforced plastics using depolymerization by solvothermal reaction with catalyst
Iwaya, T., Tokuno, S., Sasaki, M., Goto, M., & Shibata, K. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-2017-8 · Cited by 135
Okajima, I., Watanabe, K., Haramiishi, S., Nakamura, M., SHIMAMURA, Y., & Sako, T. (2016) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2016.08.015 · Cited by 123
Zhou, Y., Wu, W.-B., & Qiu, K. (2010) · Waste Management · doi:10.1016/j.wasman.2010.06.012 · Cited by 122
Roux, M., Eguémann, N., Dransfeld, C. A., Thiebaud, F., & Perreux, D. (2015) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705715599431 · Cited by 105
Treatment of waste printed circuit board by green solvent using ionic liquid
Zhu, P., Chen, Y., Wang, L. Y., & Zhou, M. J. (2012) · Waste Management · doi:10.1016/j.wasman.2012.05.025 · Cited by 103
Beauson, J., Lilholt, H., & Brøndsted, P. (2014) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684414537131 · Cited by 99
Fast recovery process of carbon fibers from waste carbon fibers-reinforced thermoset plastics
Jeong, J.-S., Kim, K., An, K.-H., & Kim, B.-J. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.07.002 · Cited by 94
Yamaguchi, A., Hashimoto, T., Kakichi, Y., Urushisaki, M., Sakaguchi, T., Kawabe, K., Kondo, K., & Iyo, H. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27575 · Cited by 87
Recycling fiber-reinforced plastic using supercritical acetone
Okajima, I., & Sako, T. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.02.018 · Cited by 87
Hadi, P., Ning, C., Ouyang, W., Xu, M., Lin, C. S. K., & McKay, G. (2014) · Waste Management · doi:10.1016/j.wasman.2014.09.020 · Cited by 85
Oliveux, G., Bailleul, J., Salle, E. L. G. L., Lefèvre, N., & Biotteau, G. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.12.010 · Cited by 76
Nunes, A. O., Viana, L. R., Guineheuc, P.-M., Moris, V. A. D. S., de Paiva, J. M. F., Barna, R., & Soudais, Y. (2017) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-017-1416-6 · Cited by 70
Circulating flow reactor for recycling of carbon fiber from carbon fiber reinforced epoxy composite
Lee, S., Choi, H.-O., Kim, J., Lee, C.-K., Kim, Y.-K., & Ju, C.-S. (2011) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-010-0394-1 · Cited by 67
Yousef, S., Tatariants, M., Tichonovas, M., Bendikienė, R., & Денафас, Г. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.227 · Cited by 67
Liu, K., Zhang, Z., & Zhang, F.-S. (2016) · Waste Management · doi:10.1016/j.wasman.2016.05.022 · Cited by 66
Chemical recycling of fiber-reinforced epoxy resin using a polyethylene glycol/NaOH system
Yang, P., Zhou, Q., Li, X., Yang, K., & Wang, Y. (2014) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684414555745 · Cited by 64
A physical process for recycling and reusing waste printed circuit boards
Muo, P., Layiding, W., Xiang, D., Gao, J., & Duan, G. (2004) · IEEE International Symposium on Electronics and the Environment (ISEE) · doi:10.1109/isee.2004.1299722 · Cited by 49
Pillain, B., Gemechu, E. D., & Sonnemann, G. (2016) · Ecological Indicators · doi:10.1016/j.ecolind.2016.08.056 · Cited by 35
Products obtained from decomposition of glass fibre-reinforced composites using microwave pyrolysis
Åkesson, D., Foltynowicz, Z., Christéen, J., et al. (2013) · Polimery · doi:10.14314/polimery.2013.582 · Cited by 33
Catalytic degradation of a carbon fibre reinforced polymer for recycling applications
Keith, M. J., Leeke, G. A., Khan, P., & Ingram, A. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.05.020 · Cited by 30
Pillain, B., Viana, L. R., Lefeuvre, A., Jacquemin, L., & Sonnemann, G. (2019) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-019-01593-y · Cited by 24
Hydrothermal modification and recycling of nonmetallic particles from waste print circuit boards
Gao, X., Li, Q., & Qiu, J. H. (2018) · Waste Management · doi:10.1016/j.wasman.2018.01.004 · Cited by 23
Nzioka, A. M., Yan, C., Kim, M.-G., Sim, Y.-J., Lee, C., & Kim, Y. (2018) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x18790351 · Cited by 11
Cited by
Composite Material Recycling Technology—State-of-the-Art and Sustainable Development for the 2020s
Krauklis, A. E., Karl, C. W., Gagani, A. I., & Jørgensen, J. K. (2021) · Journal of Composites Science · doi:10.3390/jcs5010028 · Cited by 477
Khalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Metadata
- Authors
- Karuppannan Gopalraj, S., & Kärki, T.
- Venue
- SN Applied Sciences
- Published
- 2020-02-18
- Volume
- 2
- Issue
- 3
- ISSN
- 2523-3963 (ISSN-L)
- 2523-3971
- OpenAlex
- W3007829071
- Cited by
- 452
- References
- 58
- FWCI
- 26.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.