The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
The mechanical properties of human tibial trabecular bone as a function of metaphyseal location
Abstract
Experimental determination of the elastic modulus and ultimate strength of human tibial trabecular bone as a function of metaphyseal location is presented. A 1 cm cubic matrix with planes parallel to the subchondral plate was defined on five fresh frozen cadaver tibias. Approximately 400, 7 mm X 10 mm cylindrical bone plugs were cut from the locations defined by the matrix and tested in uniaxial compressive stress at a strain rate of 0.1%S-1. Results of the study indicate that the trabecular bone properties vary as much as two orders of magnitude from one location to another. As might be predicted from Wolff's law, and noted by previous investigators, concentrations of strength arise from the medial and lateral metaphyseal cortices toward the major medial and lateral contact regions. These results may be valuable for improved analytical modeling and optimal prosthetic design.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Young’s modulus can vary by as much as 100-fold, and strength as much as fivefold, within a single epiphysis (88).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [88]
In the citing paper
“Young’s modulus can vary by as much as 100-fold, and strength as much as fivefold, within a single epiphysis (88).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [88]
Citations
Cites
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
Bone Compressive Strength: The Influence of Density and Strain Rate
Carter, D. R., & Hayes, W. C. (1976) · Science · doi:10.1126/science.996549 · Cited by 709
Koch, J. C. (1917) · American Journal of Anatomy · doi:10.1002/aja.1000210202 · Cited by 628
The mechanical properties of bone.
Evans, F. G. (1969) · PubMed · Cited by 562
Properties and an Anisotropic Model of Cancellous Bone From the Proximal Tibial Epiphysis
Williams, J. L., & Lewis, J. L. (1982) · Journal of Biomechanical Engineering · doi:10.1115/1.3138303 · Cited by 418
Physical properties of trabecular bone
Galante, J. O., Rostoker, W., & Ray, R. D. (1970) · Calcified Tissue International · doi:10.1007/bf02017552 · Cited by 302
Mechanical Property Distributions in the Cancellous Bone of the Human Proximal Femur
Brown, T. D., & Ferguson, A. B. (1980) · Acta Orthopaedica Scandinavica · doi:10.3109/17453678008990819 · Cited by 280
Performance of the tibial component in total knee replacement.
Bartel, D. L., Burstein, A. H., Santavicca, E. A., & Insall, J. N. (1982) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-198264070-00009 · Cited by 266
Tibiofemoral Contact Area-Determination and Implications
Kettelkamp, D. B., & Jacobs, A. W. (1972) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-197254020-00013 · Cited by 247
The load-bearing area in the knee joint
Walker, P. S., & Hajek, J. (1972) · Journal of Biomechanics · doi:10.1016/0021-9290(72)90030-9 · Cited by 231
Research works printed but not linked: 5
- Hayes, 1979, Correlations between stress and morphology in trabecular bone of the patella, Vol. 4, 88
- Kummer, 1966, Photoelastic studies on the functional structure of bone, Folia biotheor., 6, 31
- Meyer, 1867, Die Architektur der Spongiosa, Arch. Anat. Physiol., 47, 615
- Pauwels, 1948, Bedentung and Kausale Erklung der Spongiosaarchitektur in neuer Auffassung, Arztl. Wschr., 3, 379
- Wolff, 1870, Uber die innere Architektur der Knochen and ihre Bedeutung fur die Frame von Knockenwaschstum, Virchows Arch. path. Anat. Physiol., 50
Cited by
Sorted by citations
Items 201–292 of 292
A validated finite element study of stress shielding in a novel hybrid knee implant
Mahboob, Z. (2021) · doi:10.32920/ryerson.14649990.v1 · Cited by 7
Sannmann, F., Larédo, J.-D., Chappard, C., & Engelke, K. (2020) · Bone · doi:10.1016/j.bone.2020.115292 · Cited by 6
Призов, А. П., Tchetina, E. V., Volkov, A. V., Eremin, I., Zagorodniy, N. V., Леонидович, Л. Ф., Pulin, A. A., Belyak, E. A., Kotenko, K. V., Eshmotova, G., et al. (2024) · Biomedicines · doi:10.3390/biomedicines12051044 · Cited by 6
“Bone volume (bone present per unit volume of a specimen) is the most common histomorphometric parameter measured as it is correlated with biomechanical properties, such as bone stiffness and strength [46].”
BackgroundOut of Academics: Education, Entrepreneurship and Enterprise
Banes, A. J. (2013) · Annals of Biomedical Engineering · doi:10.1007/s10439-013-0839-x · Cited by 6
Hu, H., Huang, B., Lee, Y.-T., Hu, J. P., Wong, S., Ko, C., & You, W. (2018) · ACS Omega · doi:10.1021/acsomega.7b01924 · Cited by 6
Shore, S. W., Unnikrishnan, G. U., Hussein, A. I., & Morgan, E. F. (2012) · CRC Press eBooks · doi:10.1201/b13733-3 · Cited by 6
Future of Orthopaedic Sports Medicine and Soft Tissue Healing: The Important Role of Engineering
Woo, S. L., Liang, R., & Fisher, M. B. (2009) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-009-0065-7 · Cited by 6
Ahemd, A. M., Tissakht, M., Shrivastava, S. C., & Chan, K. (1990) · Journal of Orthopaedic Research® · doi:10.1002/jor.1100080315 · Cited by 6
“The regions assigned for the various materials and the properties of these materials assumed in the analysis (Table 1) were based on the results available in the literature (5,7,8,17).”
MethodHany, E., El‐Wassefy, N. A., Yahia, S., Elkhier, M. T. A., & El-sherbiny, I. M. (2022) · Journal of Oral and Maxillofacial Surgery Medicine and Pathology · doi:10.1016/j.ajoms.2022.07.001 · Cited by 5
Pedicle screw pull-out testing in polyurethane foam blocks: Effect of block orientation and density
Bennie, S., Crowley, J. D., Wang, T., Pelletier, M. H., & Walsh, W. R. (2024) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119241236873 · Cited by 5
Computational Modeling of Trabecular Bone Mechanics
Niebur, G. L., & Keaveny, T. M. (2009) · Springer eBooks · doi:10.1007/978-90-481-3575-2_9 · Cited by 5
“The heterogeneity of the bone requires that a large number of experiments be performed to adequately describe the behavior found within even a single anatomic site [25, 26 ].”
BackgroundCole, J. H., & van der Meulen, M. C. H. (2009) · Humana Press eBooks · doi:10.1007/978-1-59745-459-9_7 · Cited by 5
Kumar, M., Vasanthavel, S., Khan, M. I. K., Dhayalan, A., & Kannan, S. (2019) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34502 · Cited by 5
Saghaei, Z., & Hashemi, A. (2023) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119221144811 · Cited by 5
“Also, in the trabecular region, a significant amount of the variation in previously reported modulus in the trabecular region has been due to anatomic location, direction, and testing protocol.(49) Therefore, using patient-specific models in future work can be more reliable.”
MethodRemodelling of Trabecular Bone at the Proximal Tibia after Total Knee Replacement. A CT-Scan Study
Hvid, I., Bentzen, S. M., & Jørgensen, J. B. (1986) · Engineering in Medicine · doi:10.1243/emed_jour_1986_015_025_02 · Cited by 5
Design of Reverse Materials Resurfacing Implants for Mild–Moderate Medial Osteoarthritis of the Knee
Chan, H. Y., Walker, P. S., Lerner, A., Chaudhary, M. E., & Bosco, J. A. (2016) · Journal of Medical Devices · doi:10.1115/1.4035083 · Cited by 5
Chen, D., Zheng, L., Wang, C., Ai, L., Wang, W., & Fan, Y. (2026) · Biomaterials · doi:10.1016/j.biomaterials.2026.124055 · Cited by 4
Costa, A. J., Lustıg, S., Scholes, C. J., Balestro, J.-C., Fatima, M., & Parker, D. A. (2013) · Bone and Joint Research · doi:10.1302/2046-3758.21.2000130 · Cited by 4
Stresses and deformations of an osteosynthesis plate in a lateral tibia plateau fracture
Münch, M., Barth, T., Studt, A., Dehoust, J., Seide, K., Hartel, M. J., & Frosch, K. (2022) · Biomedizinische Technik/Biomedical Engineering · doi:10.1515/bmt-2021-0166 · Cited by 4
Peter, S. J., Kim, P., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1998) · MRS Proceedings · doi:10.1557/proc-530-87 · Cited by 4
Bone strength measurements at the proximal tibia
Hvid, I., Jensen, J., & Nielsen, S. (1986) · International Orthopaedics · doi:10.1007/bf00454408 · Cited by 4
Biomechanical Behavior Characterization and Constitutive Models of Porcine Trabecular Tibiae
Quintana-Barcia, C., Rodríguez, C., Álvarez, G., & Maestro, A. (2021) · Biology · doi:10.3390/biology10060532 · Cited by 4
Lin, A., Boyd, G., Varela, A., & Guldberg, R. E. (2017) · Molecular and integrative toxicology · doi:10.1007/978-3-319-56192-9_7 · Cited by 4
New method to determine the Young’s modulus of single trabeculae
Lorenzetti, S. (2006) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-005339099 · Cited by 4
Nanomaterials for Bone Tissue Regeneration and Orthopedic Implants
Gülseren, G., Goktas, M., Ceylan, H., Tekinay, A. B., & Guler, M. O. (2016) · doi:10.1002/9781118987483.ch6 · Cited by 4
“Elastic modulus of cancellous bone can vary between 50 and 100 MPa (Beddoe et al., 1976; Goldstein et al., 1983).”
BackgroundA validated finite element study of stress shielding in a novel hybrid knee implant
Mahboob, Z. (2021) · doi:10.32920/ryerson.14649990 · Cited by 4
Алексеевич, В. И. (2013) · Traumatology and Orthopedics of Russia · doi:10.21823/2311-2905-2013--3-57-63 · Cited by 3
Zhu, Z., Yang, Y., Li, L., Zhu, S. J., & Zhang, L. (2024) · PLoS ONE · doi:10.1371/journal.pone.0299996 · Cited by 3
Development of mechanical equivalent porous structures for 3D-printed artificial femoral heads
Liu, M., Wang, J., Li, Y., Cheng, K.-Y., Huan, Y., & Li, N. (2024) · Acta Mechanica Sinica · doi:10.1007/s10409-024-24089-x · Cited by 3
Sobczak, S., Baillon, B., Feipel, V., Jan, S. V. S., Patrick Salvia, A., & Rooze, M. A. (2010) · Surgical and Radiologic Anatomy · doi:10.1007/s00276-010-0753-y · Cited by 3
“In comparison with the CBTPE Young’s modulus [15], the resin Young’s modulus is thus 2.”
ResultSynthesis and characterization of silk fibroin-bioactive glass hybrid xerogels
Wu, X., Yan, F., Liu, W., Zhan, H., & Yang, W. R. (2014) · Biomaterials & biomedical engineering · doi:10.12989/bme.2014.1.2.063 · Cited by 3
“The value of elastic modulus was 311 MPa and the hardness value was 0.032 GPa, which were close to (but lower than) those of trabecular bone (Goldstein et al. 1983).”
InfluentialCarbonated-Apatite/Gelatine Porous Scaffolds for Bone Replacement
Landi, E., Martorana, S., Tampieri, A., Guicciardi, S., & Melandri, C. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.361-363.547 · Cited by 3
Sobczak, S., Patrick Salvia, A., Dugailly, P.-M., Lefèvre, P., Feipel, V., Jan, S. V. S., & Rooze, M. A. (2011) · Journal of Orthopaedic Surgery and Research · doi:10.1186/1749-799x-6-12 · Cited by 3
“Previous studies [13-15] reported results on deformations of the cancellous bone of the tibial proximal epiphysis (CBTPE) in static conditions evaluating the mechanical characteristics of different extracted bone portion in compression, traction and/or torsion.”
ResultMechanical Behavior of Trabecular Bone
Mostakhdemin, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804634-0.00003-3 · Cited by 3
Poumarat, G., & Dabonneville, M. (1992) · European Journal of Orthopaedic Surgery & Traumatology · doi:10.1007/bf01742445 · Cited by 3
“De nombreuses informations sont disponibles dans la littdrature en ce qui concerne l 'os trabdculaire humain [3, 7, 8, 13], l 'os cortical humain [5, 10, 12], et l 'os trabdculaire de bovin [1, 3, 20].”
BackgroundThe physiological basis for a flexible condylar tibial plateau design
Wevers, H. W., Dujovne, A. R., Guzzwell, J. A., & Cooke, T. D. V. (1991) · Journal of Biomedical Engineering · doi:10.1016/0141-5425(91)90117-p · Cited by 3
Fabrication of customized open-cell titanium foams by direct foaming for biomedical applications
Oliver-Urrutia, C., Casas-Luna, M., Koledova, Z. S., Slámečka, K., Zikmund, T., Kaiser, J., Čelko, L., & Montufar, E. B. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.09.136 · Cited by 2
Thangprasert, A., Chakhumanee, K., Rooying, P., Pasitsuparoad, P., & Meesane, J. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.133057 · Cited by 2
Microstructural Assessment of Cancellous Bone Using 3D Microtomography
Silva, A. M. H., Alves, J. M., Silva, O. L. D., da Silva, N. F., Gazziro, M., Pereira, J. C., Lasso, P. R. O., Vaz, C. M. P., Pereira, C. A. M., Leiva, T. P., et al. (2011) · Journal of Physics Conference Series · doi:10.1088/1742-6596/313/1/012008 · Cited by 2
Singh, A. D. (2016) · Journal of Clinical Orthopaedics and Trauma · doi:10.1016/j.jcot.2016.07.005 · Cited by 2
“Conversely, tibial underhang results in subsidence of the tibial tray and loosening.(12,13) Traditionally, it has been proposed that maximizing tibial coverage to increase fixation by improving load transfer from the implant to the proximal tibia avoids subsidence”
BackgroundAnalysis of an early intervention distal femoral resurfacing implant for medial osteoarthritis
Chaudhary, M. E., & Walker, P. S. (2016) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2016.09.039 · Cited by 2
ChemInform Abstract: Microenvironmental Regulation of Stem Cells by Biophysical and Material Cues
Keung, A. J., Kumar, S., & Schaffer, D. V. (2011) · ChemInform · doi:10.1002/chin.201127263 · Cited by 3
van Lenthe, H., & Huiskes, R. (1999) · Solid mechanics and its applications · doi:10.1007/0-306-46939-1_30 · Cited by 2
Alberts, L. R., Pao, Y. C., & Lippiello, L. (1993) · Journal of Biomechanics · doi:10.1016/0021-9290(93)90353-g · Cited by 2
Norio, I. N. O. U., Fujiwara, H., & Umetani, Y. (1993) · Transactions of the Society of Instrument and Control Engineers · doi:10.9746/sicetr1965.29.1221 · Cited by 2
Huang, C.-W., Dai, X.-C., & Wang, Y. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114205 · Cited by 1
Chen, D., Guo, M., Wang, C., Zheng, L., Ai, L., Apicella, A. M., & Fan, Y. (2026) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2026.118402 · Cited by 1
Les prothèses de genou à plateau mobile
Aglietti, P., & Baldini, A. (2007) · Springer eBooks · doi:10.1007/2-287-30285-9_45 · Cited by 1
Bone Mineral Density and Fracture Risk Assessment for Patients Undergoing Total Hip Replacement
Pétursson, Þ. (2014) · Cited by 1
Cole, J. H., & van der Meulen, M. C. H. (2020) · Contemporary Endocrinology · doi:10.1007/978-3-319-69287-6_10 · Cited by 1
Scolan, J.-B., Vennat, E., Smaniotto, B., Pillard, L., Corlay, F., & Haumont, R. (2023) · International Journal of Gastronomy and Food Science · doi:10.1016/j.ijgfs.2023.100767 · Cited by 1
Kim, K., Won, Y., Baek, M., Cui, W.-Q., Kwon, S. H., Lee, J.-H., & Kim, Y.-B. (2009) · The Journal of the Korean Orthopaedic Association · doi:10.4055/jkoa.2009.44.5.507 · Cited by 1
Davis, J. M. (2012) · OakTrust (Texas A&M University Libraries) · Cited by 1
Angadi, D. S. (2017) · University of Birmingham Institutional Research Archive (University of Birmingham) · Cited by 1
Time-sequence of biomechanical adaption in trabecular tissue during estrogen deficiency
O’Sullivan, L. (2020) · Arrow@dit (Dublin Institute of Technology) · doi:10.13025/17271 · Cited by 1
小林, 千., 敏充, 百., 浩之, 中., 高沢彰, 純, 佐., & 安田, 岳. (2012) · 中部日本整形外科災害外科学会雑誌 · doi:10.11359/chubu.2012.1099
Improvement in the Design of Bone Screws for External Fixation
Evans, M., White, S. H., & Cunningham, J. L. (1991) · Springer eBooks · doi:10.1007/978-94-011-3852-9_25
MODELO ELÁSTICO-LINEAR DE SÓLIDO POROSO TRANSVERSALMENTE ISOTRÓPICO
da Rocha, G. L., & Aguiar, A. R. (2014) · Cadernos de Engenharia de Estruturas
Stresses in the neighbourhood of an exterior crack in a bone specimen
Misra, J. C., & Roy, S. (1989) · Computers & Mathematics with Applications · doi:10.1016/0898-1221(89)90082-5
Carrera, I., Chary, G., Gelber, P. E., Monllau, J. C., & Noailly, J. (2015) · Revista Española de Artroscopia y Cirugía Articular · doi:10.1016/j.reaca.2015.02.001
White, A. A. (2002) · Proceedings of the Indiana Academy of Science
Lucas, M. W. (2010) · OakTrust (Texas A&M University Libraries)
Translational studies into the effects of exercise on estimated bone strength
Weatherholt, A. M. (2015) · IUScholarWorks (Indiana University) · doi:10.7912/c2/1391
The mobile plateau in total knee arthroplasty
Aglietti, P., & Baldini, A. (2008) · Springer eBooks · doi:10.1007/978-2-287-74175-3_34
Penetration tests and epiphyseal compressive strength
Hvid, I., Jensen, J., & Nielsen, S. (1986)
Rischke, B. (2000) · Hefte zur Zeitschrift Der Unfallchirurg · doi:10.1007/978-3-642-59731-2_20
Nakamura, E., Mizuta, H., Kudo, S., Takagi, K., & Sakamoto, K. (2000) · Orthopedics & Traumatology · doi:10.5035/nishiseisai.49.32
Characterisation of Hydrogel Scaffolds Under Compression
Tong, J., Hsu, Y.-C., Madi, K., Cossey, A. J., & Au, A. (2016) · Springer series in biomaterials science and engineering · doi:10.1007/978-3-662-53574-5_11
ON INFLUENCE OF MODEL ON PREDICTING MODULUS VALUE OF TRABECULAR BONE TISSUE
Nyashin, Y. I., Osipenko, M. A., & Kirykhin, V. Y. (1999) · Российский журнал биомеханики
Designing a Whey Protein Based Material as a Scaffold for Bone Regeneration
Dvora, M. (2010) · Louisiana State University · doi:10.31390/gradschool_dissertations.2282
Analiza właściwości tłumiących chrząstki w stawie skokowym
Klekiel, T., & Będziński, R. (2016) · Acta Bio-Optica et Informatica Medica. Inżynieria Biomedyczna
Monotonic and cyclic behaviour of trabecular bone under uniaxial and multiaxial loading
Januddi, M. S., & Januddi, M. A. F. M. S. (2015)
Long, E. B., Barak, M. M., & Frost, V. J. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.105000
“was found in the proximal tibia of humans (Goldstein et al. 1983).”
BackgroundEngbretson, A. C. (2010) · QSpace (Queen's University Library)
Liu, H., Shi, W. L., Li, B., Cao, Y., Yin, F., Liu, R., Liu, L., Zhang, X., Li, J., & Liu, J. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103206
Bone as a Material: Lessons From Nature
O’Sullivan, L., & McNamara, L. M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.12099-5
Cho, W.-S. (2013) · Springer eBooks · doi:10.1007/978-3-642-39389-1_4
Ryd, L. (1991) · Springer eBooks · doi:10.1007/978-1-4471-1825-1_14
(2018) · Elsevier eBooks · doi:10.1016/b978-3-437-22102-6.00001-9
Zusammenhang zwischen Aufbau und Funktion des Bewegungsapparats
Richard, H. A., & Kullmer, G. (2013) · Springer eBooks · doi:10.1007/978-3-8348-8611-8_5
Diagnosespezifische Unterschiede der Kniegelenkgeometrie
Goebel, M., Burgkart, R., Gerdesmeyer, L., Diehl, P., Schmitt‐Sody, M., Plötz, W., & Gradinger, R. (2005) · Der Orthopäde · doi:10.1007/s00132-005-0857-y
Prothetische Versorgung des Kniegelenks
Stoffel, K., & Kuster, M. S. (2002) · Springer eBooks · doi:10.1007/978-3-642-56361-4_16
Finite element analysis in tibial plateau fractures: a systematic review of literature
Besa, P., Vidal, C., Ramos-Rojas, J. T., Goldbaum, E., Andía, M. E., & Mura, J. (2026) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2026.107530
Initial stability of surface vs. full cemented tibial components under cyclic loading
Khan, M., Moldestad, I. O., Ellison, P., Gjertsen, J., Høl, P. J., & Furnes, O. N. (2026) · The Knee · doi:10.1016/j.knee.2026.104561
Determinants of whole bone strength
Huang, M., & van der Meulen, M. C. H. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-26739-0.00017-x
Tibial component in total knee arthroplasty: To cement or not to cement?
Cherubino, P., Castelli, C. C., & Grassi, F. A. (1996) · European Journal of Orthopaedic Surgery & Traumatology · doi:10.1007/bf02718700
“It has been shown that the cancellous bone of the proximal tibia gets weaker distally [ 15 , 45] but this observation has not been confirmed by other authors [19, 51].”
ResultTopographic Variation of Indentation Stiffness in the Tibial Subchondral Plate of the Knee Joint
Kobayashi, S., & Takei, T. (1992) · Springer eBooks · doi:10.1007/978-4-431-68216-5_15
Metadata
- Authors
- Goldstein, S. A., Wilson, D. L., Sonstegard, D. A., & Matthews, L. S.
- Affiliations
- University of Michigan (US)
- ORCID
- Goldstein, Steven A.
- Venue
- Journal of Biomechanics
- Publisher
- Elsevier BV
- Published
- 1983-01
- Volume
- 16
- Issue
- 12
- Pages
- 965-969
- ISSN
- 0021-9290 (ISSN-L)
- OpenAlex
- W2038929699
- Cited by
- 292
- References
- 29
- Citations by year
- 2026: 7 · 2025: 3 · 2024: 10 · 2023: 6 · 2022: 8 · 2021: 9 · 2020: 10 · 2019: 5 · 2018: 8 · 2017: 6 · 2016: 10 · 2015: 8 · 2014: 10 · 2013: 10 · 2012: 6
- FWCI
- 13.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Biomechanics (publishedVersion)
- PubMed (publishedVersion)
- Deep Blue (University of Michigan) (submittedVersion)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone fractures and treatments
- Health Sciences › Medicine › Surgery › Orthopaedic implants and arthroplasty
- Keywords
- trabecular bone, tibia, elastic modulus, ultimate strength, uniaxial compression, bone mechanical properties, Wolff's law, cortical bone, bone plug, prosthesis design
- MeSH terms
- Aged, Biomechanical Phenomena, Cadaver, Female, Humans, Male, Middle Aged, Stress, Mechanical, Tibia
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review