The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Hydrolytic degradation of devices based on poly(dl-lactic acid) size-dependence
Abstract
The hydrolytic degradation of aliphatic polyesters derived from lactic and glycolic acids (PLA/GA polymers) has been previously shown to proceed heterogeneously in the case of large size devices, the rate of degradation being greater inside than at the surface. A qualitative model based on diffusion-reaction phenomena was proposed which accounts for the formation of the more stable outer layer. However, this model also suggested that devices with dimensions smaller than the thickness of the outer layer should degrade less rapidly than larger ones. In an attempt to check this hypothesis, 15 x 10 x 2 mm compression moulded plates, millimetric beads and submillimetric microspheres and cast films, derived from the same batch of poly (DL-lactic acid) polymer were allowed to age comparatively in isoosmolar 0.13 M phosphate buffer, pH 7.4, at 37 degrees C. Ageing of the various devices was monitored by measuring water absorption, weight loss, L-lactic acid formation, pH and molar mass changes. As expected, large size plates and millimetric beads degraded heterogeneously and much faster than homogeneously degraded submillimetric films and particles.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The ratio of surface area to volume has shown to be a significant factor for degradation of large devices. Higher surface area ratio leads to higher degradation of the matrix.”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [87]
Citations
Cites
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
Self-citationLi, S., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00701077 · Cited by 488
Self-citationHolland, S. J., Tighe, B. J., & Gould, P. L. (1986) · Journal of Controlled Release · doi:10.1016/0168-3659(86)90001-5 · Cited by 478
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700872 · Cited by 383
Self-citationMore about the degradation of LA/GA-derived matrices in aqueous media
Vert, M., Li, S., & Garreau, H. (1991) · Journal of Controlled Release · doi:10.1016/0168-3659(91)90027-b · Cited by 295
Self-citationBiodegradable Polymers and Plastics
(2004) · Chemistry International -- Newsmagazine for IUPAC · doi:10.1515/ci.2004.26.2.30b · Cited by 293
In vivo degradation of massive poly(α-hydroxy acids): Validation of In vitro findings
Therin, M., Christel, P., Li, S., Garreau, H., & Vert, M. (1992) · Biomaterials · doi:10.1016/0142-9612(92)90027-l · Cited by 230
Self-citationA New Long-Acting Injectable Microcapsule System for the Administration of Progesterone
Beck, L. R., Cowsar, D. R., Lewis, D. H., Cosgrove, R. J., Riddle, C. T., Lowry, S. L., & Epperly, T. (1979) · Fertility and Sterility · doi:10.1016/s0015-0282(16)44002-1 · Cited by 221
Bioresorbable polymers for temporary therapeutic applications
Vert, M. (1989) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1989.051660111 · Cited by 136
Self-citation
Cited by
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Makadia, H. K., & Siegel, S. J. (2011) · Polymers · doi:10.3390/polym3031377 · Cited by 4,816
“It has also been reported that bulk degradation is faster than pure surface degradation for PLGA, which makes the release of the drug faster from the devices with higher surface area to volume [82,86,87].”
BackgroundAn Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Polymeric systems for controlled drug release
Uhrich, K. E., Cannizzaro, S. M., Langer, R. S., & Shakesheff, K. M. (1999) · Chemical Reviews · doi:10.1021/cr940351u · Cited by 2,633
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617
Biomaterial developments for bone tissue engineering
Burg, K. J. L., Porter, S., & Kellam, J. F. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00102-2 · Cited by 1,643
Metadata
- Authors
- Grizzi, I., Garreau, H., Li, S., & Vert, M.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Garreau, H.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 1995-03
- Volume
- 16
- Issue
- 4
- Pages
- 305-311
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2097892579
- Cited by
- 895
- References
- 14
- Citations by year
- 2026: 21 · 2025: 25 · 2024: 20 · 2023: 19 · 2022: 26 · 2021: 30 · 2020: 44 · 2019: 32 · 2018: 25 · 2017: 36 · 2016: 36 · 2015: 40 · 2014: 51 · 2013: 30 · 2012: 36
- FWCI
- 11.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Biomaterials (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Keywords
- poly(D,L-lactide), hydrolytic degradation, heterogeneous degradation, size effect, reaction-diffusion systems, aliphatic polyesters, water absorption, weight loss, microspheres, beads, phosphate buffer
- MeSH terms
- Absorption, Delayed-Action Preparations, Hydrogen-Ion Concentration, Hydrolysis, Lactates, Microscopy, Electron, Scanning, Microspheres, Molecular Weight, Particle Size, Polyesters, Polymers, Temperature, Time Factors, Water, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrolytic degradation of devices based on poly(dl-lactic acid) size-dependence. https://app.cochat.ai/papers/10.1016/0142-9612(95)93258-f
- The paper
- Grizzi, I., Garreau, H., Li, S., & Vert, M. (1995). Hydrolytic degradation of devices based on poly(dl-lactic acid) size-dependence. Biomaterials. https://doi.org/10.1016/0142-9612(95)93258-f
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.