The DOI matches its Crossref record; 200 of the 200 references it cites were found in a registry or an index.
A critical review of high entropy alloys and related concepts
Open accessAbstract
High entropy alloys (HEAs) are barely 12 years old. The field has stimulated new ideas and has inspired the exploration of the vast composition space offered by multi-principal element alloys (MPEAs). Here we present a critical review of this field, with the intent of summarizing key findings, uncovering major trends and providing guidance for future efforts. Major themes in this assessment include definition of terms; thermodynamic analysis of complex, concentrated alloys (CCAs); taxonomy of current alloy families; microstructures; mechanical properties; potential applications; and future efforts. Based on detailed analyses, the following major results emerge. Although classical thermodynamic concepts are unchanged, trends in MPEAs can be different than in simpler alloys. Common thermodynamic perceptions can be misleading and new trends are described. From a strong focus on 3d transition metal alloys, there are now seven distinct CCA families. A new theme of designing alloy families by selecting elements to achieve a specific, intended purpose is starting to emerge. A comprehensive microstructural assessment is performed using three datasets: experimental data drawn from 408 different alloys and two computational datasets generated using the CALculated PHAse Diagram (CALPHAD) method. Each dataset emphasizes different elements and shows different microstructural trends. Trends in these three datasets are all predicted by a ‘structure in – structure out’ (SISO) analysis developed here that uses the weighted fractions of the constituent element crystal structures in each dataset. A total of 13 distinct multi-principal element single-phase fields are found in this microstructural assessment. Relationships between composition, microstructure and properties are established for 3d transition metal MPEAs, including the roles of Al, Cr and Cu. Critical evaluation shows that commercial austenitic stainless steels and nickel alloys with 3 or more principal elements are MPEAs, as well as some established functional materials. Mechanical properties of 3d transition metal CCAs are equivalent to commercial austenitic stainless steels and nickel alloys, while some refractory metal CCAs show potential to extend the service strength and/or temperature of nickel superalloys. Detailed analyses of microstructures and properties allow two major HEA hypotheses to be resolved. Although the ‘entropy effect’ is not supported by the present data, it has nevertheless made an enduring contribution by inspiring a clearer understanding of the importance of configurational entropy on phase stability. The ‘sluggish diffusion’ hypothesis is also not supported by available data, but it motivates re-evaluation of a classical concept of metallic diffusion. Building on recent published work, the CCA field has expanded to include materials with metallic, ionic or covalent bonding. It also includes microstructures with any number of phases and any type of phases. Finally, the MPEA field is shown to include both structural and functional materials applications. A significant number of future efforts are recommended, with an emphasis on developing high-throughput experiments and computations for structural materials. The review concludes with a brief description of major accomplishments of the field and insights gained from the first 12 years of research. The field has lost none of its potency and continues to pose new questions and offer new possibilities. The vast range of complex compositions and microstructures remains the most compelling motivation for future studies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Stabilization of metallic supercooled liquid and bulk amorphous alloys
Inoue, A. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00300-6 · Cited by 5,887
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Takeuchi, A., & Inoue, A. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.2817 · Cited by 4,909
Phase Transformations in Metals and Alloys
Porter, D. A., & Easterling, K. E. (1992) · doi:10.1007/978-1-4899-3051-4 · Cited by 4,904
Pearson's handbook : crystallographic data for intermetallic phases
Villars, P., & Calvert, L. D. (1985) · Medical Entomology and Zoology · Cited by 4,328
(2014) · Developing Nonprofit and Human Service Leaders: Essential Knowledge and Skills · doi:10.4135/9781483388007.n5 · Cited by 3,811
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Self-citationRefractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Self-citationPrediction of high-entropy stabilized solid-solution in multi-component alloys
Yang, X., & Zhang, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.021 · Cited by 2,920
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Saal, J. E., Kirklin, S., Aykol, M., Meredig, B., & Wolverton, C. (2013) · JOM · doi:10.1007/s11837-013-0755-4 · Cited by 2,584
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Equilibrium Thermodynamic Properties of the Mixture of Hard Spheres
Mansoori, G. A., Carnahan, N. F., Starling, K. E., & Leland, T. W. (1971) · The Journal of Chemical Physics · doi:10.1063/1.1675048 · Cited by 2,131
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
The high-throughput highway to computational materials design
Curtarolo, S., Hart, G. L. W., Nardelli, M. B., Mingo, N., Sanvito, S., & Levy, O. (2013) · Nature Materials · doi:10.1038/nmat3568 · Cited by 2,053
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
Self-citationA Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Lu, Y., Dong, Y., Guo, S., Jiang, L., Kang, H., Wang, T., Wen, B., Wang, Z., Jie, J., Cao, Z., et al. (2014) · Scientific Reports · doi:10.1038/srep06200 · Cited by 1,737
Cohesion in Metals: Transition Metal Alloys
de Boer, F. R. (1989) · Medical Entomology and Zoology · Cited by 1,572
AFLOW: An automatic framework for high-throughput materials discovery
Curtarolo, S., Setyawan, W., Hart, G. L. W., Jahnatek, M., Chepulskii, R. V., Taylor, R. H., Wang, S., Xue, J., Yang, K., Levy, O., et al. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.02.005 · Cited by 1,531
He, J. Y., Liu, W. H., Wang, H., Wu, Y., Liu, X. J., Nieh, T. G., & Lu, Z. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,529
Selected Values of Thermodynamic Properties of Metals and Alloys
Hultgren, R. (1963) · Cited by 1,518
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
CALPHAD: Calculation of Phase Diagrams - A Comprehensive Guide
(1998) · Pergamon materials series · doi:10.1016/s1470-1804(98)x8001-6 · Cited by 1,246
Tong, C.-J., Chen, Y.-L., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0283-0 · Cited by 1,239
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Curtarolo, S., Setyawan, W., Wang, S., Xue, J., Yang, K., Taylor, R. H., Nelson, L. J., Hart, G. L. W., Sanvito, S., Buongiorno-Nardelli, M., et al. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.02.002 · Cited by 1,148
Computational thermodynamics: the Calphad method
(2008) · Choice Reviews Online · doi:10.5860/choice.45-6195 · Cited by 1,123
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
Zhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Applied Physics Letters · doi:10.1063/1.2734517 · Cited by 1,079
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Exploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
Self-citationMultifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism
Saito, T., Furuta, T., Hwang, J.-H., Kuramoto, S., Nishino, K., Suzuki, N., Chen, R., Yamada, A., Ito, K., Seno, Y., et al. (2003) · Science · doi:10.1126/science.1081957 · Cited by 935
Chemical thermodynamics of materials
Lupis, C. H. P. (1983) · Medical Entomology and Zoology · Cited by 932
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Self-citationIntroduction to the Thermodynamics of Materials
Gaskell, D. R. (2012) · CRC Press eBooks · doi:10.4324/9780203428498 · Cited by 908
Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements
Tong, C.-J., Chen, M.-R., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0218-9 · Cited by 904
Calculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys
Takeuchi, A., & Inoue, A. (2000) · Materials Transactions, JIM · doi:10.2320/matertrans1989.41.1372 · Cited by 882
Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy
Singh, S., Wanderka, N., Murty, B. S., Glatzel, U., & Banhart, J. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.09.023 · Cited by 872
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Self-citationDesign of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys
Senkov, O. N., Senkova, S. V., & Woodward, C. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.029 · Cited by 857
Self-citationMulti‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating
Huang, P. ‐., Yeh, J. ‐., Shun, T. ‐., & Chen, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300507 · Cited by 841
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
Guo, S., Hu, Q., Ng, C., & Liu, C. T. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.05.002 · Cited by 800
Phase Equilibria, Phase Diagrams and Phase Transformations: Their Thermodynamic Basis
Hillert, M. (2007) · Cambridge University Press eBooks · doi:10.1017/cbo9780511812781 · Cited by 784
The effect of lattice vibrations on substitutional alloy thermodynamics
van de Walle, A., & Ceder, G. (2002) · Reviews of Modern Physics · doi:10.1103/revmodphys.74.11 · Cited by 741
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Salishchev, G. A., Tikhonovsky, M. A., Shaysultanov, D. G., Stepanov, N. D., Kuznetsov, A. V., Kolodiy, I. V., Tortika, A. S., & Senkov, O. N. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.12.210 · Cited by 702
Self-citationHigh-entropy Alloys with High Saturation Magnetization, Electrical Resistivity and Malleability
Zhang, Y., Zuo, T., Cheng, Y., & Liaw, P. K. (2013) · Scientific Reports · doi:10.1038/srep01455 · Cited by 690
Senkov, O. N., Senkova, S. V., Woodward, C., & Miracle, D. B. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.032 · Cited by 674
Self-citationHigh-Entropy Alloys – A New Era of Exploitation
Yeh, J. W., Chen, Y. L., Lin, S. J., & Chen, S. K. (2007) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.560.1 · Cited by 658
Multicomponent and High Entropy Alloys
Cantor, B. (2014) · Entropy · doi:10.3390/e16094749 · Cited by 656
Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution
Hsu, Y.-J., Chiang, W.-C., & Wu, J.-K. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.01.001 · Cited by 655
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 645
(1994) · Choice Reviews Online · doi:10.5860/choice.31-6064 · Cited by 637
On the elemental effect of AlCoCrCuFeNi high-entropy alloy system
Tung, C.-C., Yeh, J.-W., Shun, T.-T., Chen, S.-K., Huang, Y.-S., & Chen, H.-C. (2007) · Materials Letters · doi:10.1016/j.matlet.2006.03.140 · Cited by 629
Wu, Y. D., Cai, Y. H., Wang, T., Si, J. J., Zhu, J., Wang, Y. D., & Hui, X. D. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.134 · Cited by 610
Zhang, Y., Yeh, J., Sun, J., Lin, J. P., & Yao, K.-F. (2015) · Advances in Materials Science and Engineering · doi:10.1155/2015/781303 · Cited by 594
Structure of Metals and Alloys
(2011) · ASM International eBooks · doi:10.31399/asm.tb.mnm2.t53060013 · Cited by 591
Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering
Chen, T. K., Shun, T. T., Yeh, J. W., & Wong, M. S. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.08.023 · Cited by 587
High-Entropy Alloys: Fundamentals and Applications
Gao (2016) · Cited by 561
Discovery of a Superconducting High-Entropy Alloy
Koželj, P., Vrtnik, S., Jelen, A., Jazbec, S., Jagličić, Z., Maiti, S., Feuerbacher, M., Steurer, W., & Dolinšek, J. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.107001 · Cited by 552 · cited 3×
“An MPEA of refractory elements that are all low temperature superconductors was studied [206].”
BackgroundInfluentialSize-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
Zou, Y., Maiti, S., Steurer, W., & Spolenak, R. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.049 · Cited by 541
Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy
Ma, S. G., & Zhang, Y. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.10.110 · Cited by 538
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
Bhattacharjee, P. P., Sathiaraj, G. D., Zaid, M., Gatti, J. R., Lee, C., Tsai, C.-W., & Yeh, J.-W. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.10.237 · Cited by 530
Microstructure and compressive properties of AlCrFeCoNi high entropy alloy
Wang, Y. P., Li, B. S., Ren, M. X., Yang, C., & Fu, H. Z. (2008) · Materials Science and Engineering: A · doi:10.1016/j.msea.2008.01.064 · Cited by 528
The structure of metals and alloys
Gordon, R. B. (1969) · Materials Science and Engineering · doi:10.1016/0025-5416(69)90086-x · Cited by 525
Intermetallic Compounds ‐ Principles and Practice: Progress
(2002) · Wiley eBooks · doi:10.1002/0470845856 · Cited by 520
Liu, W. H., He, J. Y., Huang, H. L., Wang, H., Lu, Z. P., & Liu, C. T. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.01.004 · Cited by 513
Combinatorial and High-Throughput Screening of Materials Libraries: Review of State of the Art
Potyrailo, R., Rajan, K., Stoewe, K., Takeuchi, I., Chisholm, B., & Lam, H. (2011) · ACS Combinatorial Science · doi:10.1021/co200007w · Cited by 511
The magnetization of pure iron and nickel
Crangle, J., & Goodman, G. M. (1971) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1971.0044 · Cited by 511
Correlations for diffusion constants
Brown, A. M., & Ashby, M. F. (1980) · Acta Metallurgica · doi:10.1016/0001-6160(80)90092-9 · Cited by 506
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
Poletti, M. G., & Battezzati, L. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.033 · Cited by 501
Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy
Senkov, O. N., & Woodward, C. F. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.09.033 · Cited by 497
Self-citationStructure and mechanical properties of a light-weight AlNbTiV high entropy alloy
Stepanov, N. D., Shaysultanov, D. G., Salishchev, G. A., & Tikhonovsky, M. A. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.11.162 · Cited by 494
Electrical, magnetic, and Hall properties of AlxCoCrFeNi high-entropy alloys
Kao, Y.-F., Chen, S.-K., Chen, T.-J., Chu, P.-C., Yeh, J.-W., & Lin, S.-J. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.10.210 · Cited by 478
Laplanche, G., Gadaud, P., Horst, O., Otto, F., Eggeler, G., & George, E. P. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.061 · Cited by 467
Microstructure and properties of a refractory high-entropy alloy after cold working
Senkov, O. N., & Semiatin, S. L. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.209 · Cited by 461
Self-citationMicrostructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys
Shun, T.-T., Chang, L.-Y., & Shiu, M.-H. (2012) · Materials Characterization · doi:10.1016/j.matchar.2012.05.005 · Cited by 447
Stepanov, N. D., Shaysultanov, D. G., Salishchev, G. A., Tikhonovsky, M. A., Oleynik, E. E., Tortika, A. S., & Senkov, O. N. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.12.157 · Cited by 439
Self-citationMicrostructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
Guo, N. N., Wang, L., Luo, L. S., Li, X. Z., Su, Y. Q., Guo, J. J., & Fu, H. Z. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.019 · Cited by 426
Criterion for Sigma Phase Formation in Cr- and V-Containing High-Entropy Alloys
Tsai, M.-H., Tsai, K.-Y., Tsai, C.-W., Lee, C., Juan, C.-C., & Yeh, J.-W. (2013) · Materials Research Letters · doi:10.1080/21663831.2013.831382 · Cited by 426
Alloyed pleasures: Multimetallic cocktails
Ranganathan, S. (2003) · NOT FOUND REPOSITORY (Indian Institute of Science Bangalore) · Cited by 417
Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys
Troparevsky, M. C., Morris, J. R., Kent, P. R. C., Lupini, A. R., & Stocks, G. M. (2015) · Physical Review X · doi:10.1103/physrevx.5.011041 · Cited by 414
Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy
Stepanov, N., Tikhonovsky, M., Yurchenko, N., Zyabkin, D., Klimova, M., Zherebtsov, S., Efimov, A., & Salishchev, G. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.12.004 · Cited by 399
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S. L., Zhu, J., Cao, W. S., & Kattner, U. R. (2014) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 395
Microstructure and oxidation behavior of new refractory high entropy alloys
Liu, C. M., Wang, H. M., Zhang, S. Q., Tang, H. B., & Zhang, A. L. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.102 · Cited by 390
Gorr, B., Azim, M., Christ, H.-J., Mueller, T., Schliephake, D., & Heilmaier, M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.012 · Cited by 386
Ji, W., Wang, W., Wang, H., Zhang, J., Wang, Y., Zhang, F., & Fu, Z. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.08.008 · Cited by 386
Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys
Hsu, C.-Y., Sheu, T.-S., Yeh, J.-W., & Chen, S.-K. (2010) · Wear · doi:10.1016/j.wear.2009.10.013 · Cited by 383
Computational Thermodynamics Aided High-Entropy Alloy Design
Zhang, C., Zhang, F., Chen, S., & Cao, W. (2012) · JOM · doi:10.1007/s11837-012-0365-6 · Cited by 381
Phase selection rules for cast high entropy alloys: An overview
Guo, S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000018 · Cited by 375
Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy
Shun, T.-T., & Du, Y.-C. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.12.088 · Cited by 374
Physical Properties of High Entropy Alloys
Tsai, M.-H. (2013) · Entropy · doi:10.3390/e15125338 · Cited by 373
Li, C., Li, J. C., Zhao, M., & Jiang, Q. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.07.124 · Cited by 371
Takeuchi, A., Amiya, K., Wada, T., Yubuta, K., & Zhang, W. (2014) · JOM · doi:10.1007/s11837-014-1085-x · Cited by 367
Curtarolo, S., Morgan, D., & Ceder, G. (2005) · Calphad · doi:10.1016/j.calphad.2005.01.002 · Cited by 356
Preparation and characterization of AlCrTaTiZr multi-element nitride coatings
Lai, C.-H., Lin, S.-J., Yeh, J.-W., & Chang, S.-Y. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.06.048 · Cited by 353
Recent Advances in Nanostructured Thermoelectric Half-Heusler Compounds
Xie, W., Weidenkaff, A., Tang, X., Zhang, Q., Poon, J., & Tritt, T. (2012) · Nanomaterials · doi:10.3390/nano2040379 · Cited by 350
Searching for Next Single-Phase High-Entropy Alloy Compositions
Gao, M., & Alman, D. (2013) · Entropy · doi:10.3390/e15104504 · Cited by 349
Chen, M.-R., Lin, S.-J., Yeh, J.-W., Chuang, M.-H., Chen, S.-K., & Huang, Y.-S. (2006) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0081-3 · Cited by 348
Phase diagram calculation: past, present and future
Chang, Y. A., Chen, S., Zhang, F., Yan, X., Xie, F., Schmid-Fetzer, R., & Oates, W. A. (2004) · Progress in Materials Science · doi:10.1016/s0079-6425(03)00025-2 · Cited by 342
Effects of Al and Si addition on the structure and properties of CoFeNi equal atomic ratio alloy
Zuo, T. T., Li, R. B., Ren, X. J., & Zhang, Y. (2014) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2014.07.023 · Cited by 337
Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy
Ng, C., Guo, S., Luan, J., Shi, S., & Liu, C. T. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.07.001 · Cited by 335
Otto, F., Hanold, N. L., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.05.014 · Cited by 322
Effect of Al addition on mechanical properties and microstructure of refractory AlxHfNbTaTiZr alloys
Lin, C.-M., Juan, C.-C., Chang, C.-H., Tsai, C.-W., & Yeh, J.-W. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.064 · Cited by 317
Effect of vanadium addition on the microstructure and properties of AlCoCrFeNi high entropy alloy
Dong, Y., Zhou, K., Lu, Y., Gao, X., Wang, T., & Li, T. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.12.048 · Cited by 316
Nanostructured multi-element (TiZrNbHfTa)N and (TiZrNbHfTa)C hard coatings
Braic, V., Vladescu, A., Balaceanu, M., Luculescu, C. R., & Braic, M. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.09.033 · Cited by 309
Hydrogen storage properties of multi-principal-component CoFeMnTixVyZrz alloys
Kao, Y.-F., Chen, S.-K., Sheu, J.-H., Lin, J.-T., Lin, W.-E., Yeh, J.-W., Lin, S.-J., Liou, T.-H., & Wang, C.-W. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.06.012 · Cited by 304
Oxidation behavior of a refractory NbCrMo0.5Ta0.5TiZr alloy
Senkov, O. N., Senkova, S. V., Dimiduk, D. M., Woodward, C., & Miracle, D. B. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6582-0 · Cited by 299
Self-citationEffect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloy
Tsai, C.-W., Tsai, M.-H., Yeh, J.-W., & Yang, C.-C. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.10.088 · Cited by 293
Yang, X., Chen, S. Y., Cotton, J. D., & Zhang, Y. (2014) · JOM · doi:10.1007/s11837-014-1059-z · Cited by 293
Ji, W., Fu, Z., Wang, W., Wang, H., Zhang, J., Wang, Y., & Zhang, F. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.11.146 · Cited by 290
Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloys
Zhu, J. M., Fu, H. M., Zhang, H. F., Wang, A. M., Li, H., & Hu, Z. Q. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2010.07.028 · Cited by 288
Chou, Y. L., Wang, Y. C., Yeh, J. W., & Shih, H. C. (2010) · Corrosion Science · doi:10.1016/j.corsci.2010.06.025 · Cited by 284
Microstructure and Compressive Properties of NbTiVTaAlx High Entropy Alloys
Yang, X., Zhang, Y., & Liaw, P. K. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.03.043 · Cited by 283
Zhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.11.049 · Cited by 279
Tensile properties of low-stacking fault energy high-entropy alloys
Zaddach, A. J., Scattergood, R. O., & Koch, C. C. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.03.109 · Cited by 278
Accelerated exploration of multi-principal element alloys for structural applications
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Calphad · doi:10.1016/j.calphad.2015.04.009 · Cited by 275
Self-citationKunce, I., Polanski, M., & Bystrzycki, J. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.05.071 · Cited by 273
Kunce, I., Polanski, M., & Bystrzycki, J. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.067 · Cited by 272
Effect of aging temperature on microstructure and properties of AlCoCrCuFeNi high-entropy alloy
Wen, L. H., Kou, H. C., Li, J. S., Chang, H., Xue, X. Y., & Zhou, L. (2009) · Intermetallics · doi:10.1016/j.intermet.2008.08.012 · Cited by 268
Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying
Varalakshmi, S., Kamaraj, M., & Murty, B. S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.09.019 · Cited by 267
Senkov, O. N., & Miracle, D. B. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.10.279 · Cited by 261
Self-citationGreen, M. L., Takeuchi, I., & Hattrick-Simpers, J. R. (2013) · Journal of Applied Physics · doi:10.1063/1.4803530 · Cited by 259
Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy
Chen, W., Fu, Z., Fang, S., Xiao, H., & Zhu, D. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.04.061 · Cited by 255
Empirical design of single phase high-entropy alloys with high hardness
Tian, F., Varga, L. K., Chen, N., Shen, J., & Vitos, L. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.10.010 · Cited by 246
Lee, C. P., Chen, Y. Y., Hsu, C. Y., Yeh, J. W., & Shih, H. C. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2744133 · Cited by 245
Cheng, K.-H., Lai, C.-H., Lin, S.-J., & Yeh, J.-W. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2010.11.034 · Cited by 237
Formation of ordered/disordered nanoparticles in FCC high entropy alloys
Shun, T.-T., Hung, C.-H., & Lee, C.-F. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.12.071 · Cited by 219
Electrochemical preparation and magnetic study of Bi–Fe–Co–Ni–Mn high entropy alloy
Yao, C.-Z., Zhang, P., Liu, M., Li, G.-R., Ye, J.-Q., Liu, P., & Tong, Y.-X. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.06.036 · Cited by 214
Hsueh, H.-T., Shen, W.-J., Tsai, M.-H., & Yeh, J.-W. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.03.096 · Cited by 206
On the Theory of Super-Lattice Structures in Alloys
Hume-Rothery, W., & Powell, H. M. (1935) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.1935.91.1.23 · Cited by 205
Ma, S. G., Zhang, S. F., Qiao, J. W., Wang, Z. H., Gao, M. C., Jiao, Z. M., Yang, H. J., & Zhang, Y. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.05.018 · Cited by 204
Hybrid Monte Carlo/Molecular Dynamics Simulation of a Refractory Metal High Entropy Alloy
Widom, M., Huhn, W. P., Maiti, S., & Steurer, W. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-013-2000-8 · Cited by 203
Li, Q. H., Yue, T. M., Guo, Z. N., & Lin, X. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1535-4 · Cited by 200
Effect of aging treatment on microstructure and properties of high-entropy Cu0.5CoCrFeNi alloy
Lin, C.-M., Tsai, H.-L., & Bor, H.-Y. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.03.030 · Cited by 199
Chang, H.-W., Huang, P.-K., Yeh, J.-W., Davison, A., Tsau, C.-H., & Yang, C.-C. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2007.12.014 · Cited by 197
Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures
Haglund, A., Koehler, M., Catoor, D., George, E. P., & Keppens, V. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.11.005 · Cited by 196
Phase Selection in High-Entropy Alloys: From Nonequilibrium to Equilibrium
Wang, Z., Guo, S., & Liu, C. T. (2014) · JOM · doi:10.1007/s11837-014-0953-8 · Cited by 195
On the formation of disordered solid solutions in multi-component alloys
Singh, A. K., & Subramaniam, A. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.10.133 · Cited by 195
Microstructure of a near-equimolar refractory high-entropy alloy
Couzinié, J. P., Dirras, G., Perrière, L., Chauveau, T., Leroy, E., Champion, Y., & Guillot, I. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.04.062 · Cited by 193
Irradiation Resistance of Multicomponent Alloys
Egami, T., Guo, W., Rack, P. D., & Nagase, T. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-013-1994-2 · Cited by 191
Single-phase high-entropy alloys – an overview
Kozak, R., Sologubenko, A., & Steurer, W. (2015) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1515/zkri-2014-1739 · Cited by 187
Structure and properties of two Al–Cr–Nb–Si–Ti high-entropy nitride coatings
Hsieh, M.-H., Tsai, M.-H., Shen, W.-J., & Yeh, J.-W. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.01.036 · Cited by 183
Critical Assessment 14: High entropy alloys and their development as structural materials
Miracle, D. B. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000749 · Cited by 182
Self-citationPhase stability and tensile properties of Co-free Al0.5CrCuFeNi2 high-entropy alloys
Ng, C., Guo, S., Luan, J., Wang, Q., Lu, J., Shi, S., & Liu, C. T. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.105 · Cited by 175
Microstructures and mechanical properties of Al CrFeNiTi0.25 alloys
Liu, S., Gao, M. C., Liaw, P. K., & Zhang, Y. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.09.073 · Cited by 153
Phase equilibria, phase diagrams and phase transformations: their thermodynamic basis
(2009) · Choice Reviews Online · doi:10.5860/choice.46-3851 · Cited by 152
Lee, C. P., Chen, Y. Y., Hsu, C., Yeh, J., & Shih, H. C. (2008) · Thin Solid Films · doi:10.1016/j.tsf.2008.06.014 · Cited by 148
Mechanical alloying and spark plasma sintering of CoCrFeNiMnAl high-entropy alloy
Wang, C., Ji, W., & Fu, Z. (2014) · Advanced Powder Technology · doi:10.1016/j.apt.2014.03.014 · Cited by 145
Ab initio design of elastically isotropic TiZrNbMoV high-entropy alloys
Tian, F., Varga, L. K., Chen, N., Shen, J., & Vitos, L. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.01.237 · Cited by 143
Manzoni, A. M., Daoud, H., Mondal, S., van Smaalen, S., Völkl, R., Glatzel, U., & Wanderka, N. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.11.074 · Cited by 141
Mechanical and tribological properties of multi-element (AlCrTaTiZr)N coatings
Lai, C.-H., Cheng, K.-H., Lin, S.-J., & Yeh, J. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2008.01.014 · Cited by 137
Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy
Choudhuri, D., Alam, T., Borkar, T., Gwalani, B., Mantri, A. S., Srinivasan, S. G., Gibson, M. A., & Banerjee, R. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.12.006 · Cited by 137
Atomic theory for students of metallurgy
Hume-Rothery, W. (1947) · Cited by 136
New structure in refractory high-entropy alloys
Lilensten, L., Couzinié, J., Perrière, L., Bourgon, J., Emery, N., & Guillot, I. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.06.064 · Cited by 136
Combinatorial Materials Sciences: Experimental Strategies for Accelerated Knowledge Discovery
Rajan, K. (2008) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.38.060407.130217 · Cited by 131
Miracle, D. B., Majumdar, B. S., Wertz, K. N., & Gorsse, S. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.08.001 · Cited by 126
Self-citationPrediction of A2 to B2 Phase Transition in the High-Entropy Alloy Mo-Nb-Ta-W
Huhn, W., & Widom, M. (2013) · JOM · doi:10.1007/s11837-013-0772-3 · Cited by 123
Multi-component nitride coatings derived from Ti–Al–Cr–Si–V target in RF magnetron sputter
Lin, C. H., Duh, J. G., & Yeh, J. (2007) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.11.041 · Cited by 121
Fu, Z., Chen, W., Fang, S., Zhang, D., Xiao, H., & Zhu, D. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.11.146 · Cited by 120
Equilibrium phase of high-entropy FeCoNiCrCu0.5 alloy at elevated temperature
Lin, C.-M., & Tsai, H.-L. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.09.041 · Cited by 114
Processing effects on the magnetic and mechanical properties of FeCoNiAl0.2Si0.2 high entropy alloy
Zuo, T., Ren, S., Liaw, P. K., & Zhang, Y. (2013) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-013-0764-x · Cited by 112
Hybrid Monte Carlo/Molecular Dynamics Simulation of a Refractory Metal High Entropy Alloy
Widom, M., Huhn, W., Maiti, S., & Steurer, W. (2018) · doi:10.1184/r1/6506957.v1 · Cited by 112
Strong amorphization of high-entropy AlBCrSiTi nitride film
Tsai, C., Lai, S.-W., Cheng, K.-H., Tsai, M., Davison, A., Tsau, C.-H., & Yeh, J. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.11.025 · Cited by 107
Tsai, M., Wang, C.-W., Lai, C.-H., Yeh, J., & Gan, J. Y. (2008) · Applied Physics Letters · doi:10.1063/1.2841810 · Cited by 105
Nature of the interfaces between the constituent phases in the high entropy alloy CoCrCuFeNiAl
Welk, B. A., Williams, R. E. A., Viswanathan, G. B., Gibson, M. A., Liaw, P. K., & Fraser, H. L. (2013) · Ultramicroscopy · doi:10.1016/j.ultramic.2013.06.006 · Cited by 99
Role of high-throughput characterization tools in combinatorial materials science
Potyrailo, R. A., & Takeuchi, I. (2004) · Measurement Science and Technology · doi:10.1088/0957-0233/16/1/001 · Cited by 91
Effect of elemental interaction on microstructure and mechanical properties of FeCoNiCuAl alloys
Zhuang, Y., Liu, W. J., Chen, Z. Y., Xue, H., & Jiang, H. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.07.003 · Cited by 89
High entropy brasses and bronzes – Microstructure, phase evolution and properties
Laws, K. J., Crosby, C. O., Sridhar, A., Conway, P. L. J., Koloadin, L. S., Zhao, M., Aron-Dine, S., & Bassman, L. C. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.285 · Cited by 86
Hammond, V. H., Atwater, M. A., Darling, K. A., Nguyen, H. Q., & Kecskes, L. J. (2014) · JOM · doi:10.1007/s11837-014-1113-x · Cited by 82
Deposition and characterization of multi-principal-element (CuSiTiYZr)C coatings
Braic, M. T., Balaceanu, M., Vlădescu, A., Zoita, C. N., & Braic, V. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.07.152 · Cited by 79
Nagase, T., Anada, S., Rack, P. D., Noh, J. H., Yasuda, H., Mori, H., & Egami, T. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.02.009 · Cited by 77
Selected corrosion behaviors of a Cu0.5NiAlCoCrFeSi bulk glassy alloy in 288°C high-purity water
Chen, Y. Y., Hong, U. T., Yeh, J. W., & Shih, H. C. (2006) · Scripta Materialia · doi:10.1016/j.scriptamat.2006.03.021 · Cited by 77
Chang, S.-Y., Chen, M.-K., & Chen, D.-S. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3097186 · Cited by 70
Stability and structure prediction of cubic phase in as cast high entropy alloys
Nong, Z., Zhu, J., Cao, Y., Yang, X., Lai, Z., & Liu, Y. (2013) · Materials Science and Technology · doi:10.1179/1743284713y.0000000368 · Cited by 69
Intrinsic surface hardening and precipitation kinetics of Al0.3CrFe1.5MnNi0.5 multi-component alloy
Chuang, M., Tsai, M., Tsai, C., Yang, N.-H., Chang, S.-Y., Yeh, J., Chen, S.-K., & Lin, S.-J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.09.133 · Cited by 68
McCluskey, P. J., & Vlassak, J. J. (2010) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2010.0286 · Cited by 67
Sputter Deposition of Multi-Element Nanoparticles as Electrocatalysts for Methanol Oxidation
Tsai, C.-F., Wu, P., Lin, P., Chao, C.-G., & Yeh, K.-Y. (2008) · Japanese Journal of Applied Physics · doi:10.1143/jjap.47.5755 · Cited by 65
Duan, H., Wu, Y. H., Hua, M., Yuan, C., Wang, D., Tu, J., Kou, H., & Li, J. (2012) · Wear · doi:10.1016/j.wear.2012.11.014 · Cited by 62
Near-constant resistivity in 4.2-360 K in a B2 Al2.08CoCrFeNi
Chen, S.-K., & Kao, Y.-F. (2012) · AIP Advances · doi:10.1063/1.3679072 · Cited by 49
Standard enthalpies of formation of selected XYZ half-Heusler compounds
Yin, M., & Nash, P. (2015) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2015.07.016 · Cited by 46
Compilation of `CALPHAD' formation enthalpy data
Fries, S. G., & Jantzen, T. (1998) · Thermochimica Acta · doi:10.1016/s0040-6031(97)00478-4 · Cited by 41
Modeling of high entropy alloys of refractory elements
del Grosso, M. F., Bozzolo, G. H., & Mosca, H. O. (2012) · Physica B Condensed Matter · doi:10.1016/j.physb.2011.12.088 · Cited by 40
Prediction and validation of quaternary high entropy alloys using statistical approaches
Domínguez, L. A., Goodall, R., & Todd, I. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000019 · Cited by 34
Microstructure and Magnetic Properties of FeNiCuMnTiSnx High Entropy Alloys
Liu, L., Zhu, J. B., Li, J. C., & Jiang, Q. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201200104 · Cited by 33
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Self-citationTuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Metadata
- Authors
- Miracle, D. B., & Senkov, O. N.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2017-01
- Volume
- 122
- Pages
- 448-511
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2534691303
- Cited by
- 8,973
- References
- 200
- FWCI
- 332.88
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.