Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 315

The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.

Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

Open access
Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J.P., Hohenwarter, A. · 2018 · Acta Materialia

Abstract

An equiatomic, single-phase TiZrNbHfTa high-entropy alloy was subjected to high-pressure torsion, leading to a grain size below 100 nm. Introducing a nanocrystalline microstructure to the material should help to accelerate a possible phase decomposition of the material by having a high amount of fast diffusion pathways and possible nucleation sites in the form of grain boundaries. In order to test the materials thermodynamic stability the nanocrystalline high-entropy alloy. was subjected to various heat treatments for temperatures between 300 °C and 1100 °C. Isochronal heat treatments (1 h) resulted in a hardness increase from 420 HV1 for the as-processed state to 530 HV1 for an annealing temperature of 500 °C, while for temperatures of 700 °C and higher a softening compared to the as-processed state occurred. In order to clarify this unexpected annealing response, analysis of selected microstructural states was performed utilizing electron microscopy, x-ray diffraction as well as mechanical testing to gain further information on microstructure-property relationships. Complementary, thermodynamic simulations were performed via the Calphad approach and compared to the experimental results. A phase decomposition of the originally equimolar single-phase high-entropy alloy into a NbTa-rich body-centered cubic phase and ZrHf-rich phases, which occurred in two different crystal structures depending on the annealing temperature, was the main reason for the property changes. The obtained results not only give valuable new insights into the phase stability of the TiZrNbHfTa alloy, but also demonstrate the impact of the newly forming phases in regards to mechanical properties and its implication for a possible practical application of this alloy.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.actamat.2017.09.035

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 35 references

Cited by

Metadata

Authors
Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P., & Hohenwarter, A.
Venue
Acta Materialia
Publisher
Elsevier BV
Published
2018-01
Volume
142
Pages
201-212
ISSN
1359-6454 (ISSN-L)
OpenAlex
W2754519447
Cited by
315
References
35
FWCI
15.19
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.