The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties
Open accessAbstract
An equiatomic, single-phase TiZrNbHfTa high-entropy alloy was subjected to high-pressure torsion, leading to a grain size below 100 nm. Introducing a nanocrystalline microstructure to the material should help to accelerate a possible phase decomposition of the material by having a high amount of fast diffusion pathways and possible nucleation sites in the form of grain boundaries. In order to test the materials thermodynamic stability the nanocrystalline high-entropy alloy. was subjected to various heat treatments for temperatures between 300 °C and 1100 °C. Isochronal heat treatments (1 h) resulted in a hardness increase from 420 HV1 for the as-processed state to 530 HV1 for an annealing temperature of 500 °C, while for temperatures of 700 °C and higher a softening compared to the as-processed state occurred. In order to clarify this unexpected annealing response, analysis of selected microstructural states was performed utilizing electron microscopy, x-ray diffraction as well as mechanical testing to gain further information on microstructure-property relationships. Complementary, thermodynamic simulations were performed via the Calphad approach and compared to the experimental results. A phase decomposition of the originally equimolar single-phase high-entropy alloy into a NbTa-rich body-centered cubic phase and ZrHf-rich phases, which occurred in two different crystal structures depending on the annealing temperature, was the main reason for the property changes. The obtained results not only give valuable new insights into the phase stability of the TiZrNbHfTa alloy, but also demonstrate the impact of the newly forming phases in regards to mechanical properties and its implication for a possible practical application of this alloy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Bulk nanostructured materials from severe plastic deformation
Valiev, R. Z., Islamgaliev, R. K., & Alexandrov, I. V. (2000) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00007-9 · Cited by 6,478
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationTwo-dimensional detector software: From real detector to idealised image or two-theta scan
Hammersley, A. P., Svensson, S. O., Hanfland, M., Fitch, A. N., & Hausermann, D. (1996) · High Pressure Research · doi:10.1080/08957959608201408 · Cited by 4,674
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
Alloy Design Strategies and Future Trends in High-Entropy Alloys
Yeh, J.-W. (2013) · JOM · doi:10.1007/s11837-013-0761-6 · Cited by 1,786
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Self-citationSubstitutional solution hardening
Fleischer, R. L. (1963) · Acta Metallurgica · doi:10.1016/0001-6160(63)90213-x · Cited by 1,281
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Paradox of Strength and Ductility in Metals Processed Bysevere Plastic Deformation
Valiev, R. Z., Alexandrov, I. V., Zhu, Y. T., & Lowe, T. C. (2002) · Journal of Materials Research · doi:10.1557/jmr.2002.0002 · Cited by 1,162
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Otto, F., Dlouhý, A., Pradeep, K. G., Kuběnová, M., Raabe, D., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.005 · Cited by 932
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi
Pickering, E. J., Muñoz-Moreno, R., Stone, H. J., & Jones, N. G. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.025 · Cited by 555
Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy
Senkov, O. N., & Woodward, C. F. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.09.033 · Cited by 497
Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy
Stepanov, N. D., Shaysultanov, D. G., Salishchev, G. A., & Tikhonovsky, M. A. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.11.162 · Cited by 494
Physical Metallurgy of High-Entropy Alloys
Yeh, J.-W. (2015) · JOM · doi:10.1007/s11837-015-1583-5 · Cited by 488
Microstructure and properties of a refractory high-entropy alloy after cold working
Senkov, O. N., & Semiatin, S. L. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.209 · Cited by 461
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S. L., Zhu, J., Cao, W. S., & Kattner, U. R. (2014) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 395
An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy
Owen, L. R., Pickering, E. J., Playford, H. Y., Stone, H. J., Tucker, M. G., & Jones, N. G. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.032 · Cited by 338
On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy
Couzinié, J.-P., Lilensten, L., Champion, Y., Dirras, G., Perrière, L., & Guillot, I. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.08.024 · Cited by 284
Self-citationElastic and plastic properties of as-cast equimolar TiHfZrTaNb high-entropy alloy
Dirras, G., Lilensten, L., Djemia, P., Laurent-Brocq, M., Tingaud, D., Couzinié, J.-P., Perrière, L., Chauveau, T., & Guillot, I. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.12.017 · Cited by 245
Self-citationThe fcc solid solution stability in the Co-Cr-Fe-Mn-Ni multi-component system
Bracq, G., Laurent-Brocq, M., Perrière, L., Pirès, R., Joubert, J.-M., & Guillot, I. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.017 · Cited by 236
Self-citationMicrostructure of a near-equimolar refractory high-entropy alloy
Couzinié, J. P., Dirras, G., Perrière, L., Chauveau, T., Leroy, E., Champion, Y., & Guillot, I. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.04.062 · Cited by 193
Self-citationDirras, G., Couque, H., Lilensten, L., Heczel, A., Tingaud, D., Couzinié, J.-P., Perrière, L., Gubicza, J., & Guillot, I. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.11.018 · Cited by 171
Self-citationSecond phase formation in the CoCrFeNiMn high entropy alloy after recrystallization annealing
Stepanov, N., Shaysultanov, D. G., Ozerov, M. S., Zherebtsov, S. V., & Salishchev, G. A. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.08.088 · Cited by 171
Dirras, G. F., Gubicza, J., Heczel, A., Lilensten, L., Couzinié, J., Perrière, L., Guillot, I., & Hocini, A. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.08.007 · Cited by 133
Self-citationTakeuchi, A., Wada, T., & Zhang, Y. (2016) · Intermetallics · doi:10.1016/j.intermet.2016.12.002 · Cited by 38
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Phase Engineering of High‐Entropy Alloys
Chang, X., Zeng, M., Liu, K., & Fu, L. (2020) · Advanced Materials · doi:10.1002/adma.201907226 · Cited by 464
Metadata
- Authors
- Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P., & Hohenwarter, A.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 142
- Pages
- 201-212
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2754519447
- Cited by
- 315
- References
- 35
- FWCI
- 15.19
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.