The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Role of layered structure in ductility improvement of layered Ti-Al metal composite
Abstract
Abstract Layered Ti-Al metal composite (LMC) was designed and fabricated by hot-rolling and annealing of pure Ti and Al sheets. The as-prepared composite exhibits high tensile ductility, being superior to any individual Ti or Al sheets. The stress/strain evolution and fracture behavior of the LMC were analyzed by in-situ observations during the tensile deformation. Three deformation stages of LMC were clearly observed by neutron diffraction: elastic stage, elastic-plastic stage and plastic stage. It is found that stress partitioning at the elastic-plastic deformation stage improves the strain balance of LMC, but leads to an internal stress accumulated at the interface. Additionally, a strain-transfer from Ti to adjacent Al layers relieves the strain localization of Ti layers in LMC, which improves the ductility of Ti. Both stress partitioning and strain localization of Ti layers facilitate the nucleation of cracks at a low macro strain. However, the crack propagation is constrained by layered structure. In terms of the Al layers, the constrained micro-cracks relieve the stress concentration in Al layer and improve the ductility of Al layers, so that cracking indirectly affects the plastic deformation behavior of LMC, then improving its entire ductility. This work provides a new structural strategy towards simultaneously improving strength and ductility to develop high performance LMC by structural design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical properties of nanocrystalline materials
Meyers, M. A., Mishra, A., & Benson, D. J. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.08.003 · Cited by 4,597
The deformation of plastically non-homogeneous materials
Ashby, M. F. (1970) · The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786437008238426 · Cited by 4,296
Strain gradient plasticity: Theory and experiment
Fleck, N. A., Muller, G. M., Ashby, M. F., & Hutchinson, J. W. (1994) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)90502-9 · Cited by 3,754
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Wu, X., Yang, M., Yuan, F., Wu, G., Wei, Y., Huang, X., & Zhu, Y. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1517193112 · Cited by 2,017
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper
Fang, T., Li, W. L., Tao, N. R., & Lu, K. (2011) · Science · doi:10.1126/science.1200177 · Cited by 1,732
Heterogeneous materials: a new class of materials with unprecedented mechanical properties
Wu, X., & Zhu, Y. T. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1343208 · Cited by 1,410
Extraordinary strain hardening by gradient structure
Wu, X., Jiang, P., Chen, L., Yuan, F., & Zhu, Y. T. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1324069111 · Cited by 1,315
Failure of metals I: Brittle and ductile fracture
Pineau, A., Benzerga, A. A., & Pardoen, T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2015.12.034 · Cited by 1,180
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
Liu, G., Zhang, G., Jiang, F., et al. (2013) · Nature Materials · doi:10.1038/nmat3544 · Cited by 1,122
Review on superior strength and enhanced ductility of metallic nanomaterials
Ovid’ko, I. A., Valiev, R. Z., & Zhu, Y. T. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.02.002 · Cited by 1,026
Mechanical properties of copper/bronze laminates: Role of interfaces
Ma, X., Huang, C., Moering, J., Ruppert, M., Höppel, H. W., Göken, M., Narayan, J., & Zhu, Y. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.023 · Cited by 871
Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?
Huang, L. J., Geng, L., & Peng, H.-X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.002 · Cited by 788
Self-citationNegative poisson’s ratio in single-layer black phosphorus
Jiang, J.-W., & Park, H. S. (2014) · Nature Communications · doi:10.1038/ncomms5727 · Cited by 774
Lu, K. (2010) · Science · doi:10.1126/science.1185866 · Cited by 717
Synergetic Strengthening by Gradient Structure
Wu, X. L., Jiang, P., Chen, L., Zhang, J. F., Yuan, F. P., & Zhu, Y. T. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.935821 · Cited by 614
Plastic strain localization in metals: origins and consequences
Antolovich, S. D., & Armstrong, R. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.06.001 · Cited by 497
Bioinspired Structural Materials
Ortiz, C., & Boyce, M. C. (2008) · Science · doi:10.1126/science.1154295 · Cited by 430
Mechanical behaviour of laminated metal composites
Lesuer, D. R., Syn, C. K., Sherby, O. D., Wadsworth, J., Lewandowski, J. J., & Hunt, W. H. (1996) · International Materials Reviews · doi:10.1179/095066096790151204 · Cited by 368
High‐Strength and High‐Ductility Nanostructured and Amorphous Metallic Materials
Kou, H., Lu, J., & Li, Y. (2014) · Advanced Materials · doi:10.1002/adma.201401595 · Cited by 283
Bonatti, C., & Mohr, D. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.02.003 · Cited by 275
Peng, L. M., Wang, J., Li, H., et al. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.09.010 · Cited by 189
Microstructural banding effects clarified through micrographic digital image correlation
Taşan, C. C., Hoefnagels, J. P. M., & Geers, M. G. D. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.02.014 · Cited by 189
Yu, B., Blanc, R., Soutis, C., & Withers, P. J. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.09.001 · Cited by 125
Cold roll bonding of multi-layered bi-metal laminate composites
Chaudhari, G. P., & Acoff, V. L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.018 · Cited by 123
Bi-continuous metal matrix composites
Peng, H. X., Fan, Z., & Evans, J. (2001) · Materials Science and Engineering A · doi:10.1016/s0921-5093(00)01879-7 · Cited by 123
Delaying premature local necking of high-strength Cu: A potential way to enhance plasticity
Liu, H. S., Zhang, B., & Zhang, G. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.08.049 · Cited by 118
In situ synchrotron computed laminography of damage in carbon fibre–epoxy [90/0]s laminates
Moffat, A. J., Wright, P. M., Helfen, L., Baumbach, T., Johnson, G., Spearing, S. M., & Sinclair, I. (2009) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.09.027 · Cited by 94
Revealing extraordinary tensile plasticity in layered Ti-Al metal composite
Huang, M., Fan, G., Geng, L., Cao, G., Du, Y., Wu, H., Zhang, T. T., Kang, H., Wang, T. M., Du, G. H., et al. (2016) · Scientific Reports · doi:10.1038/srep38461 · Cited by 94
Self-citationYoung's modulus, fracture strain, and tensile strength of sputtered titanium thin films
Tsuchiya, T., Hirata, M., & Chiba, N. (2005) · Thin Solid Films · doi:10.1016/j.tsf.2005.02.024 · Cited by 77
Work hardening in ultrafine-grained titanium: Multilayering and grading
Yang, D., Cizek, P., Fabijanic, D. M., Wang, J., & Hodgson, P. D. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.018 · Cited by 70
Cited by
Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678
An overview of tailoring strain delocalization for strength-ductility synergy
Wu, H., & Fan, G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100675 · Cited by 536
Self-citationXu, J., Fu, J., Li, S., Xu, G., Li, Y., & Wang, Z. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.12.017 · Cited by 29
Metadata
- Authors
- Huang, M., Xu, C., Fan, G., Maawad, E., Gan, W., Geng, L., Lin, F., Tang, G., Wu, H., Du, Y., Li, D., Miao, K., Zhang, T., Yang, X., Xia, Y., Cao, G., Kang, H., Wang, T., Xiao, T., & Xie, H.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 153
- Pages
- 235-249
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2799741825
- Cited by
- 453
- References
- 32
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.