The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Open accessAbstract
The body centered cubic (BCC) high entropy alloys (HEAs) MoNbTaW and MoNbTaVW show exceptional strength retention up to 1900K. The mechanistic origin of the retained strength is unknown yet is crucial for finding the best alloys across the immense space of BCC HEA compositions. Experiments on Nb-Mo, Fe-Si and Ti-Zr-Nb alloys report decreased mobility of edge dislocations, motivating a theory of strengthening of edge dislocations in BCC alloys. The strength of BCC HEAs can be controlled by edge dislocations, especially at high temperatures, because the random field of solutes in these high-concentration alloys creates large energy barriers for thermally-activated edge glide. A parameter-free theory for this mechanism of edge motion in BCC alloys qualitatively and quantitatively captures the strength versus temperature for both MoNbTaW and MoNbTaVW alloys and other BCC HEAs. A reduced analytic version of the theory, embodying the edge-strengthening mechanism, then enables screening over > 600,000 compositions in the Mo-Nb-Ta-V-W family to identify promising new compositions with high retained strength and/or reduced mass density. Overall, the theory reveals an unexpected mechanism - edge dislocation motion in the random alloy - as responsible for high temperature strength in BCC alloys and paves the way for theory-guided design of new high-performance HEAs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
Stukowski, A. (2010) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/1/015012 · Cited by 16,608
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
High-precision sampling for Brillouin-zone integration in metals
Methfessel, M., & Paxton, A. T. (1989) · Physical Review B · doi:10.1103/physrevb.40.3616 · Cited by 7,774
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Structural Relaxation Made Simple
Bitzek, E., Koskinen, P., Gähler, F., Moseler, M., & Gumbsch, P. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.170201 · Cited by 1,755
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers
Zhou, X. W., Johnson, R. A., & Wadley, H. N. G. (2004) · Physical Review B · doi:10.1103/physrevb.69.144113 · Cited by 1,522
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
Cordero, Z. C., Knight, B. E., & Schuh, C. A. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1191808 · Cited by 1,209
Electronic properties of random alloys: Special quasirandom structures
Wei, S.-H., Ferreira, L. G., Bernard, J. E., & Zunger, A. (1990) · Physical Review B · doi:10.1103/physrevb.42.9622 · Cited by 1,064
Strengthening Mechanisms in Crystal Plasticity
Argon, A. (2007) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198516002.001.0001 · Cited by 920
Theory of strengthening in fcc high entropy alloys
Varvenne, C., Luque, A., & Curtin, W. A. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.040 · Cited by 908
Self-citationMechanical properties of refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Hawk, J. A., Zhou, H. F., Chen, M. W., & Gao, M. C. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.188 · Cited by 528
Solute strengthening in random alloys
Varvenne, C., Leyson, G. P. M., Ghazisaeidi, M., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.046 · Cited by 427
Self-citationHigh temperature strength of refractory complex concentrated alloys
Senkov, O. N., Gorsse, S., & Miracle, D. B. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.032 · Cited by 423
NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Gao, M. C., Hawk, J. A., Ma, S. G., Zhou, H. F., & Zhang, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.07.102 · Cited by 361
A predictive mechanism for dynamic strain ageing in aluminium–magnesium alloys
Curtin, W. A., Olmsted, D. L., & Hector, L. G. (2006) · Nature Materials · doi:10.1038/nmat1765 · Cited by 312
Self-citationTheory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.007 · Cited by 310
Self-citationSolid-solution strengthening in refractory high entropy alloys
Coury, F. G., Kaufman, M., & Clarke, A. J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.006 · Cited by 290
On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy
Couzinié, J.-P., Lilensten, L., Champion, Y., Dirras, G., Perrière, L., & Guillot, I. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.08.024 · Cited by 284
The Chemistry of Deformation: How Solutes Soften Pure Metals
Trinkle, D. R., & Woodward, C. (2005) · Science · doi:10.1126/science.1118616 · Cited by 248
Average-atom interatomic potential for random alloys
Varvenne, C., Luque, A., Nöhring, W. G., & Curtin, W. A. (2016) · Physical review. B./Physical review. B · doi:10.1103/physrevb.93.104201 · Cited by 197
Self-citationChapter 88 Dislocation–Obstacle Interactions at the Atomic Level
Bacon, D. J., Osetsky, Y. N., & Rodney, D. (2009) · Dislocations in Solids · doi:10.1016/s1572-4859(09)01501-0 · Cited by 173
Rao, S. I., Akdim, B., Antillon, E. A., Woodward, C. F., Parthasarathy, T. A., & Senkov, O. N. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.02.013 · Cited by 171
Yao, H., Qiao, J.-W., Gao, M. C., Hawk, J. A., Ma, S., & Zhou, H. (2016) · Entropy · doi:10.3390/e18050189 · Cited by 159
First-principles-based prediction of yield strength in the RhIrPdPtNiCu high-entropy alloy
Yin, B., & Curtin, W. A. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0151-x · Cited by 140
Self-citationDirras, G. F., Gubicza, J., Heczel, A., Lilensten, L., Couzinié, J., Perrière, L., Guillot, I., & Hocini, A. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.08.007 · Cited by 133
Long-ranged interactions in bcc NbMoTaW high-entropy alloys
Körmann, F., Ruban, A. V., & Sluiter, M. H. F. (2016) · Materials Research Letters · doi:10.1080/21663831.2016.1198837 · Cited by 131
Prediction of A2 to B2 Phase Transition in the High-Entropy Alloy Mo-Nb-Ta-W
Huhn, W., & Widom, M. (2013) · JOM · doi:10.1007/s11837-013-0772-3 · Cited by 123
Computation of entropies and phase equilibria in refractory V-Nb-Mo-Ta-W high-entropy alloys
Wang, Y., Yan, M., Zhu, Q., Wang, W. Y., Wu, Y., Hui, X., Otis, R., Shang, S., Liu, Z., & Chen, L. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.017 · Cited by 86
Ann-body potential for a Zr–Nb system based on the embedded-atom method
Lin, D.-Y., Wang, S. S., Peng, D., Li, M., & Hui, X. (2013) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/25/10/105404 · Cited by 55
Robust atomistic calculation of dislocation line tension
Szajewski, B. A., Pavia, F., & Curtin, W. A. (2015) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/23/8/085008 · Cited by 52
Self-citation
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationMechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility
Wei, S., Kim, S. J., Kang, J., Zhang, Y., Zhang, Y., Furuhara, T., Park, E. S., & Tasan, C. C. (2020) · Nature Materials · doi:10.1038/s41563-020-0750-4 · Cited by 503
Yin, S., Zuo, Y., Abu-Odeh, A., Zheng, H., Li, X.-G., Ding, J., Ong, S. P., Asta, M., & Ritchie, R. O. (2021) · Nature Communications · doi:10.1038/s41467-021-25134-0 · Cited by 398
Multiplicity of dislocation pathways in a refractory multiprincipal element alloy
Wang, F., Balbus, G. H., Xu, S., Su, Y., Shin, J., Rottmann, P. F., Knipling, K. E., Stinville, J.-C., Mills, L. H., Senkov, O. N., et al. (2020) · Science · doi:10.1126/science.aba3722 · Cited by 361
Metadata
- Authors
- Maresca, F., & Curtin, W. A.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 182
- Pages
- 235-249
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2910442486
- Cited by
- 508
- References
- 40
- FWCI
- 23.03
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.