The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion
Open accessAbstract
Abstract Rapid solidification cellular structures are known to play a crucial role in helping achieve high strength and high ductility in 316L austenitic stainless steels fabricated by laser powder-bed-fusion (L-PBF). Despite this, the understanding of their intrinsic characteristics (e.g., crystallographic orientations, dislocations, precipitates, elemental segregations) and the respective impacts on the material's strength and thermal stability remains nebulous. We conduct several dedicated transmission electron microscopy (TEM) studies to investigate these strengthening mechanisms and identified that cell walls follow specific crystallographic orientations. The high density of tangled dislocations inside cell walls are found to have a higher tendency to dissociate, forming wider stacking faults while oxide precipitates are confined inside cell walls. These features act as barriers to moving dislocations upon plastic deformation and contribute to the high strength. Our dislocation dynamic simulations indicate that segregated particles are effective in blocking dislocations locally, helping the formation of dislocation cells and participating to the material strengthening. To study the thermal stability of L-PBF 316L SS, we perform systematic post-processing heat treatments from 400-1200°C. Microstructure characterizations using electron backscatter diffraction, TEM, and synchrotron X-ray diffraction coupled with dislocation dynamics and CALPHAD simulations and tensile testing reveal three heat treatment zones where the structure-property relationship can be tuned. After annealing up to 600°C, the microstructure remains stable; but the work hardening behavior is altered with a material that retains high strength and high ductility. Annealing between 600-1000°C activates elemental diffusion and gradual disappearance of cell walls, leading to a sharp drop in yield strength and a tradeoff between strength and ductility. Low-angle grain boundaries remain stable up to 1000°C while the average grain size defined by high angle grain boundaries is near constant at annealing temperatures up to 800°C. Annealing above 1100°C removes all L-PBF microstructure footprints and renders a conventional-like microstructure. Compared to conventional materials, L-PBF 316LSS displays substantially higher thermal stability and superior performance at elevated temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Hirth, J. P., & Lothe, J. (1968) · Medical Entomology and Zoology · Cited by 9,770
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Thermo-Calc & DICTRA, computational tools for materials science
Andersson, J.-O., Helander, T., Höglund, L., Shi, P., & Sundman, B. (2002) · Calphad · doi:10.1016/s0364-5916(02)00037-8 · Cited by 4,322
The Thermo-Calc databank system
Sundman, B., Jansson, B., & Andersson, J.-O. (1985) · Calphad · doi:10.1016/0364-5916(85)90021-5 · Cited by 3,343
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Quantitative measurement of displacement and strain fields from HREM micrographs
Hÿtch, M. J., Snoeck, E., & Kilaas, R. (1998) · Ultramicroscopy · doi:10.1016/s0304-3991(98)00035-7 · Cited by 2,752
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Self-citationCurrent issues in recrystallization: a review
Doherty, R. D., Hughes, D. A., Humphreys, F. J., Jonas, J. J., Jensen, D. J., Kassner, M. E., King, W. E., McNelley, T. R., McQueen, H. J., & Rollett, A. D. (1997) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00424-3 · Cited by 2,397
RICE, J. R. (1971) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(71)90010-x · Cited by 1,810
LMFIT: Non-Linear Least-Square Minimization and Curve-Fitting for Python
Newville, M., Otten, R., Nelson, A., Stensitzki, T., Ingargiola, A., Allan, D., Fox, A., Carter, F., Michał, Osborn, R., et al. (2014) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.598352 · Cited by 1,680
Hull, D., & Bacon, D. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70217-6 · Cited by 1,501
Pelleg, J. (2012) · Solid mechanics and its applications · doi:10.1007/978-94-007-4342-7_2 · Cited by 1,457
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
Bertsch, K. M., de Bellefon, G. M., Kuehl, B., & Thoma, D. J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.07.063 · Cited by 832
DICTRA, a tool for simulation of diffusional transformations in alloys
Borgenstam, A., Höglund, L., Ågren, J., & Engström, A. (2000) · Journal of Phase Equilibria · doi:10.1361/105497100770340057 · Cited by 745
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.008 · Cited by 669
Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F., & King, W. E. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2549-x · Cited by 657
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Formation of metastable cellular microstructures in selective laser melted alloys
Prashanth, K. G., & Eckert, J. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.209 · Cited by 597
Measurement of the displacement field of dislocations to 0.03 Å by electron microscopy
Hÿtch, M. J., Putaux, J.-L., & Pénisson, J.-M. (2003) · Nature · doi:10.1038/nature01638 · Cited by 589
Enabling strain hardening simulations with dislocation dynamics
Arsenlis, A., Cai, W., Tang, M., Rhee, M., Oppelstrup, T., Hommes, G., Pierce, T. G., & Bulatov, V. V. (2007) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/15/6/001 · Cited by 537
Kurzynowski, T., Gruber, K., Stopyra, W., Kuźnicka, B., & Chlebus, E. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.01.103 · Cited by 489
A non-singular continuum theory of dislocations
CAI, W., Arsenlis, A., Weinberger, C. R., & Bulatov, V. V. (2005) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2005.09.005 · Cited by 479
Kong, D., Dong, C., Ni, X., Zhang, L., Yao, J., Man, C., Cheng, X., Xiao, K., & Li, X. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2019.03.003 · Cited by 471
Orientation selection in dendritic evolution
Haxhimali, T., Karma, A., Gonzales, F., & Rappaz, M. (2006) · Nature Materials · doi:10.1038/nmat1693 · Cited by 440
Shi, R., Khairallah, S. A., Roehling, T. T., Heo, T. W., McKeown, J. T., & Matthews, M. J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.11.053 · Cited by 365
Microscale residual stresses in additively manufactured stainless steel
Chen, W., Voisin, T., Zhang, Y., Forien, J., Spadaccini, C. M., McDowell, D. L., Zhu, T., & Wang, Y. (2019) · Nature Communications · doi:10.1038/s41467-019-12265-8 · Cited by 352
Self-citationCharacterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion
Yan, F., Xiong, W., Faierson, E., & Olson, G. B. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.06.011 · Cited by 351
Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing
Pham, M. S., Dovgyy, B., & Hooper, P. A. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.07.082 · Cited by 348
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
Trelewicz, J. R., Halada, G. P., Donaldson, O. K., & Manogharan, G. P. (2016) · JOM · doi:10.1007/s11837-016-1822-4 · Cited by 274
Li, Z., Voisin, T., McKeown, J. T., Ye, J., Braun, T., Kamath, C., King, W. E., & Wang, Y. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.05.009 · Cited by 257
Self-citationGodec, M., Zaefferer, S., Podgornik, B., Šinko, M., & Tchernychova, E. (2020) · Materials Characterization · doi:10.1016/j.matchar.2019.110074 · Cited by 252
Gray, G. T., Livescu, V., Rigg, P. A., Trujillo, C. P., Cady, C. M., Chen, S. R., Carpenter, J. S., Lienert, T. J., & Fensin, S. J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.045 · Cited by 238
Cruz, V., Chao, Q., Birbilis, N., Fabijanic, D., Hodgson, P. D., & Thomas, S. (2020) · Corrosion Science · doi:10.1016/j.corsci.2019.108314 · Cited by 217
Pinomaa, T., Lindroos, M., Walbrühl, M., Provatas, N., & Laukkanen, A. (2019) · SSRN Electronic Journal · doi:10.2139/ssrn.3411752 · Cited by 195
Li, Z., He, B., & Guo, Q. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.10.005 · Cited by 178
Austenitic stainless steel strengthened by the in situ formation of oxide nanoinclusions
Saeidi, K., Kvetková, L., Lofaj, F., & Shen, Z. (2015) · RSC Advances · doi:10.1039/c4ra16721j · Cited by 170
Revilla, R. I., Wouters, B., Andreatta, F., Lanzutti, A., Fedrizzi, L., & Graeve, I. D. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108480 · Cited by 158
Laleh, M., Hughes, A. E., Yang, S. Y. S., Li, J., Xu, W., Gibson, I., & Tan, Y. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.108394 · Cited by 143
Zhou, C., Hu, S., Shi, Q., Tao, H., Song, Y., Zheng, J., Xu, P., & Zhang, L. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.108353 · Cited by 136
Nolf, W. D., Vanmeert, F., & Janssens, K. (2014) · Journal of Applied Crystallography · doi:10.1107/s1600576714008218 · Cited by 125
Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting
Laleh, M., Hughes, A. E., Xu, W., Gibson, I., & Tan, Y. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.04.028 · Cited by 121
Zhong, Y., Rännar, L., Wikman, S., Koptyug, A. V., Liu, L., Cui, D., & Shen, Z. J. (2017) · Fusion Engineering and Design · doi:10.1016/j.fusengdes.2017.01.032 · Cited by 105
Artefacts in geometric phase analysis of compound materials
Peters, J. J. P., Beanland, R., Alexe, M., Cockburn, J. W., Revin, D. G., Zhang, S. Y., & Sánchez, A. M. (2015) · Ultramicroscopy · doi:10.1016/j.ultramic.2015.05.020 · Cited by 93
Li, S., Hu, J. Z., Chen, W., Yu, J., Li, M., & Wang, Y. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.11.036 · Cited by 85
Self-citationSmall, K., Clayburn, Z., DeMott, R. W., Primig, S., Fullwood, D. T., & Taheri, M. L. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139380 · Cited by 32
MICROSTRUCTURAL AND THERMAL STABILITY OF SELECTIVE LASER MELTED 316L STAINLESS STEEL SINGLE TRACKS
Krakhmalev, P., Yadroitsava, I., Fredriksson, G., & Yadroitsev, I. A. (2017) · The South African Journal of Industrial Engineering · doi:10.7166/28-1-1466 · Cited by 21
Cited by
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Heterostructured stainless steel: Properties, current trends, and future perspectives
Romero-Resendiz, L., El-Tahawy, M., Zhang, T., Rossi, M. C., Marulanda-Cardona, D. M., Yang, T., Amigó-Borrás, V., Huang, Y., Mirzadeh, H., Beyerlein, I. J., et al. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100691 · Cited by 278
Metadata
- Authors
- Voisin, T., Forien, J.-B., Perron, A., Aubry, S., Bertin, N., Samanta, A., Baker, A., & Wang, Y. M.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 203
- Pages
- 116476
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W3104989938
- Cited by
- 623
- References
- 50
- FWCI
- 28.04
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.