The DOI matches its Crossref record; 238 of the 238 references it cites were found in a registry or an index.
A review on fabricating tissue scaffolds using vat photopolymerization
Abstract
Vat Photopolymerization (stereolithography, SLA), an Additive Manufacturing (AM) or 3D printing technology, holds particular promise for the fabrication of tissue scaffolds for use in regenerative medicine. Unlike traditional tissue scaffold fabrication techniques, SLA is capable of fabricating designed scaffolds through the selective photopolymerization of a photopolymer resin on the micron scale. SLA offers unprecedented control over scaffold porosity and permeability, as well as pore size, shape, and interconnectivity. Perhaps even more significantly, SLA can be used to fabricate vascular networks that may encourage angio and vasculogenesis. Fulfilling this potential requires the development of new photopolymers, the incorporation of biochemical factors into printed scaffolds, and an understanding of the effects scaffold geometry have on cell viability, proliferation, and differentiation. This review compares SLA to other scaffold fabrication techniques, highlights significant advances in the field, and offers a perspective on the field's challenges and future directions. STATEMENT OF SIGNIFICANCE Engineering de novo tissues continues to be challenging due, in part, to our inability to fabricate complex tissue scaffolds that can support cell proliferation and encourage the formation of developed tissue. The goal of this review is to first introduce the reader to traditional and Additive Manufacturing scaffold fabrication techniques. The bulk of this review will then focus on apprising the reader of current research and provide a perspective on the promising use of vat photopolymerization (stereolithography, SLA) for the fabrication of complex tissue scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–238 of 238
Kim, J., Yaszemski, M. J., & Lu, L. (2009) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2008.0642 · Cited by 90
Increased Mixing Improves Hydrogel Homogeneity and Quality of Three-Dimensional Printed Constructs
Cohen, D. L., Lo, W. M., Tsavaris, A. M., Peng, D. H., Lipson, H., & Bonassar, L. J. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0093 · Cited by 87
Modeling effects of oxygen inhibition in mask‐based stereolithography
Jariwala, A., Ding, F., Boddapati, A., et al. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124734 · Cited by 84
Bioengineered Vascular Grafts: Can We Make Them Off-the-Shelf?
Dahl, S. L. M., Blum, J. L., & Niklason, L. E. (2011) · Trends in Cardiovascular Medicine · doi:10.1016/j.tcm.2012.03.004 · Cited by 84
Lee, J. W., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31057 · Cited by 80
3D scaffold fabrication with PPF/DEF using micro-stereolithography
Lee, J., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.267 · Cited by 77
Sun, A. X., Lin, H., Beck, A. M., Kilroy, E. J., & Tuan, R. S. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00115 · Cited by 75
Kwon, I. K., & Matsuda, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.041 · Cited by 72
Development of a micro-bellows actuator using micro-stereolithography technology
Kang, H., Lee, I. H., & Cho, D. (2006) · Microelectronic Engineering · doi:10.1016/j.mee.2006.01.228 · Cited by 70
Diffusion-limited photopolymerization in scanning micro-stereolithography
Fang, N. X., Sun, C., & Zhang, X. (2004) · Applied Physics A · doi:10.1007/s00339-004-2938-x · Cited by 69
Design of Porous Three-Dimensional PDLLA/nano-hap Composite Scaffolds Using Stereolithography
Ronca, A., Ambrosio, L., & Grijpma, D. W. (2012) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.2012.10211 · Cited by 59
Mass production of 3-D microstructures using projection microstereolithography
Ha, Y. M., Choi, J. W., & Lee, S. H. (2008) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-007-1031-8 · Cited by 56
Virtual Prototyping of Biomanufacturing in Medical Applications
Morsi, Y., Wong, C. S., & Patel, S. S. (2007) · Springer eBooks · doi:10.1007/978-0-387-68831-2_7 · Cited by 55
Vinylcarbonates and vinylcarbamates: Biocompatible monomers for radical photopolymerization
Heller, C. M., Schwentenwein, M., Russmueller, G., Koch, T., Moser, D., Schopper, C., Varga, F., Stampfl, J., & Liska, R. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24476 · Cited by 53
Choi, J. W., Ha, Y. M., Lee, S. H., & Choi, K. H. (2006) · Journal of Mechanical Science and Technology · doi:10.1007/bf02916326 · Cited by 48
Adhesion and growth of human Schwann cells on trimethylene carbonate (co)polymers
Pêgo, A. P., Vleggeert-Lankamp, C. L. A., Deenen, M. G. M., et al. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10074 · Cited by 47
Multiphoton Lithography: Techniques, Materials, and Applications
Stampfl, J., Liska, R., & Ovsianikov, A. (2016) · Cited by 47
Development of micro-stereolithography technology using a UV lamp and optical fiber
Choi, J. S., Kang, H., Lee, I. H., Ko, T. J., & Cho, D. (2008) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1461-1 · Cited by 46
Scheduling and process planning for multiple material stereolithography
Kim, H.-C., Choi, J. W., & Wicker, R. B. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011049243 · Cited by 44
Gong, Y., Ma, Z., Zhou, Q., Li, J., Gao, C., & Shen, J. (2008) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856208783432453 · Cited by 42
Effect of Pore Architecture on Oxygen Diffusion in 3D Scaffolds for Tissue Engineering
Ahn, G., Park, J., Kang, T.-Y., Lee, J. W., Kang, H., & Cho, D. (2010) · Journal of Biomechanical Engineering · doi:10.1115/1.4002429 · Cited by 40
Development of a bone scaffold using HA nanopowder and micro-stereolithography technology
Kim, J. Y., Lee, J. W., Lee, S., Park, E. K., Kim, S., & Cho, D. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.204 · Cited by 40
Leigh, S. J., Gilbert, H. T. J., Barker, I. A., Becker, J. M., Richardson, S. M., Hoyland, J. A., Covington, J. A., & Dove, A. P. (2012) · Biomacromolecules · doi:10.1021/bm3015736 · Cited by 39
3D microfabricated bioreactor with capillaries
Xia, C., & Fang, N. X. (2009) · Biomedical Microdevices · doi:10.1007/s10544-009-9350-4 · Cited by 38
Projection Stereolithographic Fabrication of BMP-2 Gene-activated Matrix for Bone Tissue Engineering
Lin, H., Tang, Y. M., Lozito, T. P., Oyster, N. M., Kang, R. B., Fritch, M. R., Wang, B., & Tuan, R. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-11051-0 · Cited by 38
Photoinitiated Cationic Polymerization: Reactivity and Mechanistic Aspects
Kahveci, M. U., Yilmaz, A. G., & Yağcı, Y. (2010) · doi:10.1002/9780470594179.ch11 · Cited by 37
Shin, J. H., Lee, J. W., Jung, J. H., Cho, D., & Lim, G. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5467-y · Cited by 33
Bioprinting Essentials of Cell and Protein Viability
Skardal, A. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00001-3 · Cited by 32
3D Printable Biophotopolymers for in Vivo Bone Regeneration
Russmueller, G., Liska, R., Stampfl, J., Heller, C. M., Mautner, A., Macfelda, K., Kapeller, B., Lieber, R., Haider, A., Mika, K., et al. (2015) · Materials · doi:10.3390/ma8063685 · Cited by 23
3D-Printable Biodegradable Polyester Tissue Scaffolds for Cell Adhesion
Sirrine, J. M., Pekkanen, A. M., Nelson, A. M., Chartrain, N. A., Williams, C. B., & Long, T. E. (2015) · Australian Journal of Chemistry · doi:10.1071/ch15327 · Cited by 21
Self-citationShim, J., Kim, A. J., Park, J. Y., Yi, N., Kang, I., Park, J., Rhie, J., & Cho, D. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-4867-8 · Cited by 21
Molding Micropatterns of Elasticity on PEG‐Based Hydrogels to Control Cell Adhesion and Migration
Díez, M., Schulte, V. A., Stefanoni, F., Natale, C. F., Mollica, F., Cesa, C. M., Chen, J., Möller, M., Netti, P. A., Ventre, M., et al. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201080122 · Cited by 21
Lee, J. W., Kim, K., Kang, K. S., Chen, S., Rhie, J., & Cho, D. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34485 · Cited by 21
Photopolymers for Multiphoton Lithography in Biomaterials and Hydrogels
Tibbitt, M. W., Shadish, J. A., & DeForest, C. A. (2016) · Wiley eBooks · doi:10.1002/9783527682676.ch8 · Cited by 17
3-D Fabrication Technology for Tissue Engineering
Chen, A. A., Tsang, V. L., Albrecht, D. R., & Bhatia, S. N. (2006) · Springer eBooks · doi:10.1007/978-0-387-25844-7_2 · Cited by 16
Neurotoxicity of commonly used hepatic drugs
Ahrens, C. L., & Manno, E. M. (2013) · Handbook of clinical neurology · doi:10.1016/b978-0-7020-4087-0.00046-2 · Cited by 11
Chitosan for bone and cartilage regenerative engineering
Beck, S., Jiang, T., Nair, L. S., & Laurencin, C. T. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100228-5.00002-x · Cited by 10
Scaffold Fabrication with Biodegradable Poly(propylene fumarate) Using Microstereolithography
Lee, J. W., Kim, B. G., Lim, G. B., & Cho, D. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.342-343.141 · Cited by 9
Cited by
Porous ceramics: Light in weight but heavy in energy and environment technologies
Chen, Y., Wang, N., Ola, O., Xia, Y., & Zhu, Y. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100589 · Cited by 441
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Research and application of machine learning for additive manufacturing
Qin, J., Hu, F., Liu, Y., Witherell, P., Wang, C. C. L., Rosen, D. W., Simpson, T. W., Lu, Y., & Tang, Q. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102691 · Cited by 391
3D-printed self-healing hydrogels via Digital Light Processing
Caprioli, M., Roppolo, I., Chiappone, A., Larush, L., Pirri, C. F., & Magdassi, S. (2021) · Nature Communications · doi:10.1038/s41467-021-22802-z · Cited by 335
Metadata
- Authors
- Chartrain, N. A., Williams, C. B., & Whittington, A. R.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 74
- Pages
- 90-111
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2800099205
- Cited by
- 253
- References
- 238
- FWCI
- 8.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.