The DOI matches its Crossref record; 238 of the 238 references it cites were found in a registry or an index.
A review on fabricating tissue scaffolds using vat photopolymerization
Abstract
Vat Photopolymerization (stereolithography, SLA), an Additive Manufacturing (AM) or 3D printing technology, holds particular promise for the fabrication of tissue scaffolds for use in regenerative medicine. Unlike traditional tissue scaffold fabrication techniques, SLA is capable of fabricating designed scaffolds through the selective photopolymerization of a photopolymer resin on the micron scale. SLA offers unprecedented control over scaffold porosity and permeability, as well as pore size, shape, and interconnectivity. Perhaps even more significantly, SLA can be used to fabricate vascular networks that may encourage angio and vasculogenesis. Fulfilling this potential requires the development of new photopolymers, the incorporation of biochemical factors into printed scaffolds, and an understanding of the effects scaffold geometry have on cell viability, proliferation, and differentiation. This review compares SLA to other scaffold fabrication techniques, highlights significant advances in the field, and offers a perspective on the field's challenges and future directions. STATEMENT OF SIGNIFICANCE Engineering de novo tissues continues to be challenging due, in part, to our inability to fabricate complex tissue scaffolds that can support cell proliferation and encourage the formation of developed tissue. The goal of this review is to first introduce the reader to traditional and Additive Manufacturing scaffold fabrication techniques. The bulk of this review will then focus on apprising the reader of current research and provide a perspective on the promising use of vat photopolymerization (stereolithography, SLA) for the fabrication of complex tissue scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Reconstituting organ-level lung functions on a chip
Huh, D., Matthews, B. D., Mammoto, A., Montoya-Zavala, M., Hsin, H. Y., & Ingber, D. E. (2010) · Science · doi:10.1126/science.1188302 · Cited by 4,250
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Decellularization of tissues and organs
Gilbert, T. W., Sellaro, T. L., & Badylak, S. F. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.014 · Cited by 2,222
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Principles of Tissue Engineering
(2014) · Elsevier eBooks · doi:10.1016/c2011-0-07193-4 · Cited by 1,906
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
From 3D cell culture to organs-on-chips
Huh, D., Hamilton, G. A., & Ingber, D. E. (2011) · Trends in Cell Biology · doi:10.1016/j.tcb.2011.09.005 · Cited by 1,834
Tissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Soker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,833
Functional Arteries Grown in Vitro
Niklason, L. E., Gao, J., Abbott, W. M., Hirschi, K. K., Houser, S., Marini, R., & Langer, R. (1999) · Science · doi:10.1126/science.284.5413.489 · Cited by 1,766
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Phase separation processes in polymer solutions in relation to membrane formation
van de Witte, P., Dijkstra, P. J., van den Berg, J. W. A., & Feijen, J. (1996) · Journal of Membrane Science · doi:10.1016/0376-7388(96)00088-9 · Cited by 1,393
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Electrospun poly(ɛ-caprolactone)/gelatin nanofibrous scaffolds for nerve tissue engineering
Ghasemi-Mobarakeh, L., Prabhakaran, M. P., Morshed, M., Nasr-Esfahani, M.-H., & Ramakrishna, S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.08.007 · Cited by 1,152
Electrospun silk-BMP-2 scaffolds for bone tissue engineering
Li, C., Vepari, C., Jin, H.-J., Kim, H. J., & Kaplan, D. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.022 · Cited by 1,140
Mooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P., & Langer, R. (1996) · Biomaterials · doi:10.1016/0142-9612(96)87284-x · Cited by 1,085
Human tissue-engineered blood vessels for adult arterial revascularization
L'Heureux, N., Dusserre, N., Konig, G., Victor, B., Keire, P., Wight, T. N., Chronos, N. A. F., Kyles, A. E., Gregory, C. R., Hoyt, G., et al. (2006) · Nature Medicine · doi:10.1038/nm1364 · Cited by 1,083
Scaffolds for tissue fabrication
Ma, P. X. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00233-0 · Cited by 1,077
Vascularization is the key challenge in tissue engineering
Novosel, E. C., Kleinhans, C., & Kluger, P. J. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.004 · Cited by 1,062
The role of matrix stiffness in regulating cell behavior†
Wells, R. G. (2008) · Hepatology · doi:10.1002/hep.22193 · Cited by 1,059
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Shear-thinning hydrogels for biomedical applications
Guvendiren, M., Lu, H. D., & Burdick, J. A. (2012) · Soft Matter · doi:10.1039/c1sm06513k · Cited by 911
Williams, C. G., Malik, A. N., Kim, T. K., Manson, P. N., & Elisseeff, J. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.024 · Cited by 899
Self-citationZhang, R., & Ma, P. X. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990315)44:4<446::aid-jbm11>3.0.co;2-f · Cited by 890
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Open pore biodegradable matrices formed with gas foaming
Harris, L. D., Kim, B.-S., & Mooney, D. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19981205)42:3<396::aid-jbm7>3.0.co;2-e · Cited by 824
Chung, C., & Burdick, J. A. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.08.027 · Cited by 760
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Hollister, S. J., Maddox, R. D., & Taboas, J. M. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00148-5 · Cited by 715
3D printed microfluidics for biological applications
Ho, C. M. B., Ng, S. H., Li, K. H. H., & Yoon, Y.-J. (2015) · Lab on a Chip · doi:10.1039/c5lc00685f · Cited by 704
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641
A novel method to fabricate bioabsorbable scaffolds
Whang, K., Thomas, C. H., Healy, K. E., & Nuber, G. (1995) · Polymer · doi:10.1016/0032-3861(95)93115-3 · Cited by 639
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Xing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Consequences of ineffective decellularization of biologic scaffolds on the host response
Keane, T. J., Londono, R., Turner, N. J., & Badylak, S. F. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.054 · Cited by 613
Effect of local sequential VEGF and BMP-2 delivery on ectopic and orthotopic bone regeneration
Kempen, D. H. R., Lu, L., Heijink, A., Hefferan, T. E., Creemers, L. B., Maran, A., Yaszemski, M. J., & Dhert, W. J. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.031 · Cited by 610
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation
Mikos, A. G., Bao, Y., Cima, L. G., Ingber, D. E., Vacanti, J. P., & Langer, R. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270207 · Cited by 606
Nam, Y. S., Yoon, J. J., & Park, T. G. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(2000)53:1<1::aid-jbm1>3.0.co;2-r · Cited by 577
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Electrospun poly(lactic acid-co-glycolic acid) scaffolds for skin tissue engineering
Kumbar, S. G., Nukavarapu, S. P., James, R., Nair, L. S., & Laurencin, C. T. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.028 · Cited by 569
Readily Available Tissue-Engineered Vascular Grafts
Dahl, S. L. M., Kypson, A. P., Lawson, J. H., Blum, J. L., Strader, J. T., Li, Y., Manson, R. J., Tente, W. E., DiBernardo, L., Hensley, M. T., et al. (2011) · Science Translational Medicine · doi:10.1126/scitranslmed.3001426 · Cited by 563
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
Halloran, J. W. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031841 · Cited by 544
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Topography, Cell Response, and Nerve Regeneration
Hoffman-Kim, D., Mitchel, J. A., & Bellamkonda, R. V. (2010) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-070909-105351 · Cited by 516
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
The Potential of Cellulose Nanocrystals in Tissue Engineering Strategies
Domingues, R. M. A., Gomes, M. E., & Reis, R. L. (2014) · Biomacromolecules · doi:10.1021/bm500524s · Cited by 509
Shor, L., Güçeri, S., Wen, X., Gandhi, M., & Sun, W. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.018 · Cited by 494
Design and Development of Three-Dimensional Scaffolds for Tissue Engineering
Liu, C., Xia, Z., & Czernuszka, J. T. (2007) · Chemical Engineering Research and Design · doi:10.1205/cherd06196 · Cited by 483
Techniques for fabrication and construction of three-dimensional scaffolds for tissue engineering
Lu, T., Li, Y., & Chen, T. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s38635 · Cited by 477
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Vaz, C. M., van Tuijl, S., Bouten, C. V. C., & Baaijens, F. P. T. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.06.006 · Cited by 459
Directed Movement of Vascular Smooth Muscle Cells on Gradient-Compliant Hydrogels
Wong, J. Y., Velasco, A., Rajagopalan, P., & Pham, Q. (2003) · Langmuir · doi:10.1021/la026403p · Cited by 455
Cox, S. C., Thornby, J. A., Gibbons, G. J., Williams, M. A., & Mallick, K. K. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.11.024 · Cited by 452
Three-dimensional electrospun ECM-based hybrid scaffolds for cardiovascular tissue engineering
Heydarkhan-Hagvall, S., Schenke-Layland, K., Dhanasopon, A. P., Rofail, F., Smith, H., Wu, B. M., Shemin, R., Beygui, R. E., & MacLellan, W. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.034 · Cited by 445
Phase separation, pore structure, and properties of nanofibrous gelatin scaffolds
Liu, X., & Ma, P. X. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.04.024 · Cited by 444
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Formation of highly porous biodegradable scaffolds for tissue engineering
Mikos, A. G., & Temenoff, J. S. (2000) · Electronic Journal of Biotechnology · doi:10.2225/vol3-issue2-fulltext-5 · Cited by 426
Scaffolding In Tissue Engineering
(2005) · CRC Press eBooks · doi:10.1201/9781420027563 · Cited by 404
Smart biomaterials design for tissue engineering and regenerative medicine
Furth, M. E., Atala, A., & Van Dyke, M. E. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.042 · Cited by 397
Salt Fusion: An Approach to Improve Pore Interconnectivity within Tissue Engineering Scaffolds
Murphy, W. L., Dennis, R. G., Kileny, J. L., & Mooney, D. J. (2002) · Tissue Engineering · doi:10.1089/107632702753503045 · Cited by 392
Lin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
Lawson, J. H., Glickman, M. H., Ilzecki, M., Jakimowicz, T., Jaroszynski, A., Peden, E. K., Pilgrim, A. J., Prichard, H. L., Guziewicz, M., Przywara, S., et al. (2016) · The Lancet · doi:10.1016/s0140-6736(16)00557-2 · Cited by 381
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
Two-Photon Photopolymerization and 3D Lithographic Microfabrication
Sun, H.-B., & Kawata, S. (2006) · Advances in Polymer Science · doi:10.1007/b94405 · Cited by 380
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
OPTN/SRTR 2012 Annual Data Report: Kidney
Matas, A. J., Smith, J. M., Skeans, M. A., Thompson, B., Gustafson, S. K., Schnitzler, M. A., Stewart, D. E., Cherikh, W. S., Wainright, J. L., Snyder, J. J., et al. (2014) · American Journal of Transplantation · doi:10.1111/ajt.12579 · Cited by 376
Woods, T., & Gratzer, P. F. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.066 · Cited by 374
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/1076327042500274 · Cited by 373
Brown, X. Q., Ookawa, K., & Wong, J. Y. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.08.009 · Cited by 372
O'Brien, F. J., Harley, B. A., Waller, M. A., Yannas, I. V., Gibson, L. J., & Prendergast, P. J. (2006) · Technology and Health Care · doi:10.3233/thc-2007-15102 · Cited by 366
Three-dimensional nano-HAp/collagen matrix loading with osteogenic cells in organ culture
Du, C., Cui, F. Z., Zhu, X. D., & de Groot, K. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990315)44:4<407::aid-jbm6>3.0.co;2-t · Cited by 365
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Perspectives on Additive Manufacturing
Bourell, D. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031606 · Cited by 362
Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries
Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360
Tissue-Engineered Blood Vessel for Adult Arterial Revascularization
L'Heureux, N., McAllister, T. N., & de la Fuente, L. M. (2007) · New England Journal of Medicine · doi:10.1056/nejmc071536 · Cited by 356
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
Werner, M., Blanquer, S. B. G., Haimi, S. P., Korus, G., Dunlop, J. W. C., Duda, G. N., Grijpma, D. W., & Petersen, A. (2017) · Advanced Science · doi:10.1002/advs.201600347 · Cited by 345
Prevascularization of cardiac patch on the omentum improves its therapeutic outcome
Dvir, T., Kedem, A., Ruvinov, E., Levy, O., Freeman, I., Landa, N., Holbova, R., Feinberg, M. S., Dror, S., Etzion, Y., et al. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0812242106 · Cited by 345
Finite element study of scaffold architecture design and culture conditions for tissue engineering
Olivares, A. L., Marsal, È., Planell, J. A., & Lacroix, D. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.041 · Cited by 339
Survival and Proliferative Ability of Various Living Cell Types after Laser-Induced Forward Transfer
Hopp, B., Smausz, T., Kresz, N., Barna, N., Bor, Z., Kolozsvári, L., Chrisey, D. B., Szabó, A., & Nógrádi, A. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1817 · Cited by 333
Vascularized Bone Tissue Engineering: Approaches for Potential Improvement
Nguyen, L. H., Annabi, N., Nikkhah, M., Bae, H., Binan, L., Park, S., Kang, Y., Yang, Y., & Khademhosseini, A. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0012 · Cited by 313
Cure depth in photopolymerization: Experiments and theory
Lee, J. H., Prud'homme, R. K., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0485 · Cited by 312
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Elomaa, L., Teixeira, S., Hakala, R., Korhonen, H., Grijpma, D. W., & Seppälä, J. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.039 · Cited by 311
Ligament tissue engineering: An evolutionary materials science approach
Laurencin, C. T., & Freeman, J. W. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.073 · Cited by 304
Lee, W., Kwon, D., Choi, W., Jung, G. Y., Au, A. K., Folch, A., & Jeon, S. (2015) · Scientific Reports · doi:10.1038/srep07717 · Cited by 300
3D printed anatomical nerve regeneration pathways
Johnson, B. N., Lancaster, K. Z., Zhen, G., He, J., Gupta, M. K., Kong, Y. L., Engel, E. A., Krick, K. D., Ju, A., Meng, F., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501760 · Cited by 293
Lee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., & Lu, L. (2007) · Biomacromolecules · doi:10.1021/bm060834v · Cited by 292
Lee, W., Lee, V., Polio, S., Keegan, P., Lee, J., Fischer, K., Park, J., & Yoo, S. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22613 · Cited by 289
Lee, J. W., Kang, K. S., Lee, S. H., Kim, J.-Y., Lee, B.-K., & Cho, D.-W. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.035 · Cited by 274
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
Digital material fabrication using mask‐image‐projection‐based stereolithography
Zhou, C., Chen, Y., Yang, Z., & Khoshnevis, B. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311312148 · Cited by 267
Zheng, X., Deotte, J., Alonso, M. P., Farquar, G. R., Weisgraber, T. H., Gemberling, S., Lee, H., Fang, N., & Spadaccini, C. M. (2012) · Review of Scientific Instruments · doi:10.1063/1.4769050 · Cited by 267
Fabrication of Controlled Release Biodegradable Foams by Phase Separation
Lo, H., Ponticiello, M. S., & Leong, K. W. (1995) · Tissue Engineering · doi:10.1089/ten.1995.1.15 · Cited by 259
There is no such thing as a biocompatible material
Williams, D. F. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.08.035 · Cited by 248
Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., Kling, R., Ostendorf, A., & Spitzbart, M. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/12/125014 · Cited by 246
Tendon tissue engineering using scaffold enhancing strategies
Liu, Y., Ramanath, H. S., & Wang, D.-A. (2008) · Trends in Biotechnology · doi:10.1016/j.tibtech.2008.01.003 · Cited by 245
Real three dimensional micro fabrication using stereo lithography and metal molding
Ikuta, K., & Hirowatari, K. (2002) · Proceedings, IEEE micro electro mechanical systems · doi:10.1109/memsys.1993.296949 · Cited by 244
Application of laser printing to mammalian cells
Barron, J. A., Ringeisen, B. R., Kim, H., Spargo, B. J., & Chrisey, D. B. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.161 · Cited by 242
Essentials of 3D Biofabrication and Translation
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-18665-5 · Cited by 234
Two‐photon stereolithography for realizing ultraprecise three‐dimensional nano/microdevices
Park, S. ‐., Yang, D. ‐., & Lee, K. ‐. (2009) · Laser & Photonics Reviews · doi:10.1002/lpor.200810027 · Cited by 233
Costa, P. F., Albers, H. J., Linssen, J. E. A., Middelkamp, H. H. T., van der Hout, L., Passier, R., van den Berg, A., Malda, J., & van der Meer, A. D. (2017) · Lab on a Chip · doi:10.1039/c7lc00202e · Cited by 226
Blood vessels engineered from human cells
Poh, M., Boyer, M., Solan, A., Dahl, S. L., Pedrotty, D., Banik, S. S., McKee, J. A., Klinger, R. Y., Counter, C. M., & Niklason, L. E. (2005) · The Lancet · doi:10.1016/s0140-6736(05)66735-9 · Cited by 226
Tissue-engineered autologous vaginal organs in patients: a pilot cohort study
Raya-Rivera, A. M., Esquiliano, D., Fierro-Pastrana, R., López-Bayghen, E., Valencia, P., Ordorica-Flores, R., Soker, S., Yoo, J. J., & Atala, A. (2014) · The Lancet · doi:10.1016/s0140-6736(14)60542-0 · Cited by 224
Two-photon polymerisation for three-dimensional micro-fabrication
Wu, S., Serbin, J., & Gu, M. (2006) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2006.03.004 · Cited by 222
Decellularization for whole organ bioengineering
Arenas-Herrera, J. E., Ko, I. K., Atala, A., & Yoo, J. J. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/1/014106 · Cited by 221
Fisher, J. P., Dean, D., & Mikos, A. G. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00178-3 · Cited by 216
Bio-ink for on-demand printing of living cells
Ferris, C. J., Gilmore, K. J., Beirne, S., McCallum, D., Wallace, G. G., & in het Panhuis, M. (2013) · Biomater. Sci. · doi:10.1039/c2bm00114d · Cited by 214
Morris, V. B., Nimbalkar, S., Younesi, M., McClellan, P., & Akkus, O. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1643-1 · Cited by 207
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Synthesis of poly(propylene fumarate)
Kasper, F. K., Tanahashi, K., Fisher, J. P., & Mikos, A. G. (2009) · Nature Protocols · doi:10.1038/nprot.2009.24 · Cited by 205
Braided Nanofibrous Scaffold for Tendon and Ligament Tissue Engineering
Barber, J. G., Handorf, A. M., Allee, T. J., & Li, W.-J. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0538 · Cited by 202
Atala, A. (2009) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2009.10.003 · Cited by 202
Sodian, R., Sperling, J. S., Martin, D. P., Egozy, A., Stock, U., Mayer, J. E., & Vacanti, J. P. (2000) · Tissue Engineering · doi:10.1089/107632700320793 · Cited by 201
Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
Photopolymers for rapid prototyping
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197
Guillaume, O., Geven, M. A., Sprecher, C. M., Stadelmann, V. A., Grijpma, D. W., Tang, T. T., Qin, L., Lai, Y., Alini, M., de Bruijn, J. D., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.006 · Cited by 197
Hegde, M., Meenakshisundaram, V., Chartrain, N., Sekhar, S., Tafti, D., Williams, C. B., & Long, T. E. (2017) · Advanced Materials · doi:10.1002/adma.201701240 · Cited by 196
Self-citationStereolithography: Materials, Processes and Applications
Bártolo, P. (2011) · Cited by 195
Blanquer, S. B. G., Werner, M., Hannula, M., Sharifi, S., Lajoinie, G. P. R., Eglin, D., Hyttinen, J., Poot, A. A., & Grijpma, D. W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6553 · Cited by 195
3D printed nanocomposite matrix for the study of breast cancer bone metastasis
Zhu, W., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2015.09.010 · Cited by 193
Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography
Chan, V., Jeong, J. H., Bajaj, P., Collens, M., Saif, T., Kong, H., & Bashir, R. (2012) · Lab Chip · doi:10.1039/c1lc20688e · Cited by 188
Thadavirul, N., Pavasant, P., & Supaphol, P. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35010 · Cited by 187
Biomaterial Scaffold Fabrication Techniques for Potential Tissue Engineering Applications
Subia, B., Kundu, J., & C., S. (2010) · Tissue Engineering · doi:10.5772/8581 · Cited by 183
Rapid prototyping of small size objects
Bertsch, A., Bernhard, P., Vogt, C., & Renaud, P. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010373362 · Cited by 180
Standard Terminology for Additive Manufacturing - General Principles - Terminology
F42 Committee (2016) · doi:10.1520/f3177-15 · Cited by 180
Maquet, V., Boccaccini, A. R., Pravata, L., Notingher, I., & Jérôme, R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10587 · Cited by 177
Poly(L-lactic acid) foams with cell seeding and controlled-release capacity
Lo, H., Kadiyala, S., Guggino, S. E., & Leong, K. W. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199604)30:4<475::aid-jbm5>3.0.co;2-m · Cited by 177
Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds
P.Fisher, J., Holland, T. A., Dean, D., Engel, P. S., & Mikos, A. G. (2001) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856201316883476 · Cited by 175
Engineering more than a cell: vascularization strategies in tissue engineering
Phelps, E. A., & García, A. J. (2010) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2010.06.005 · Cited by 174
Ronca, A., Ambrosio, L., & Grijpma, D. W. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.004 · Cited by 165
A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes
Pan, Y., Zhou, C., & Chen, Y. (2012) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4007465 · Cited by 164
Heller, C., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23734 · Cited by 163
Ovsianikov, A., Mironov, V., Stampfl, J., & Liska, R. (2012) · Expert Review of Medical Devices · doi:10.1586/erd.12.48 · Cited by 160
Three-dimensionally crossing manifold micro-mixer for fast mixing in a short channel length
Lim, T. W., Son, Y., Jeong, Y. J., Yang, D., Kong, H. J., Lee, K.-S., & Kim, D. (2010) · Lab on a Chip · doi:10.1039/c005325m · Cited by 158
Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
Lan, P. X., Lee, J. W., Seol, Y., & Cho, D. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3567-2 · Cited by 154
Goldstein, A. S., Zhu, G. G., Morris, G. E., Meszlenyi, R. K., & Mikos, A. G. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.421 · Cited by 154
Zhang, R., & Larsen, N. B. (2017) · Lab on a Chip · doi:10.1039/c7lc00926g · Cited by 154
Design of porous polymeric scaffolds by gas foaming of heterogeneous blends
Salerno, A., Oliviero, M., Maio, E. D., Iannace, S., & Netti, P. A. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3767-4 · Cited by 152
Biomaterials and scaffolds for ligament tissue engineering
Ge, Z., Yang, F., Goh, J., Ramakrishna, S., & Lee, E. H. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30578 · Cited by 151
Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals
Kumar, S., Hofmann, M., Steinmann, B., Foster, E. J., & Weder, C. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301321v · Cited by 150
Multi-material microstereolithography
Choi, J.-W., MacDonald, E. W., & Wicker, R. B. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2434-8 · Cited by 149
Choi, J., Wicker, R. B., Cho, S., Ha, C., & Lee, S. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910925072 · Cited by 148
Advances in cationic photopolymerization
Sangermano, M. (2012) · Pure and Applied Chemistry · doi:10.1351/pac-con-12-04-11 · Cited by 145
Adult stem cell-based tissue engineered blood vessels: A review
Krawiec, J. T., & Vorp, D. A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.014 · Cited by 143
Jansen, J., Melchels, F. P. W., Grijpma, D. W., & Feijén, J. (2008) · Biomacromolecules · doi:10.1021/bm801001r · Cited by 136
Stereolithography‐Based Hydrogel Microenvironments to Examine Cellular Interactions
Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101023 · Cited by 135
Matsuda, T., & Mizutani, M. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10295 · Cited by 135
Bian, W., Li, D., Lian, Q., Li, X., Zhang, W., Wang, K., & Jin, Z. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193511 · Cited by 130
Solid freeform fabrication of designer scaffolds of hyaluronic acid for nerve tissue engineering
Suri, S., Han, L., Zhang, W., Singh, A. K., Chen, S., & Schmidt, C. E. (2011) · Biomedical Microdevices · doi:10.1007/s10544-011-9568-9 · Cited by 128
Development and Characterization of a 3D Printed, Keratin-Based Hydrogel
Placone, J. K., Navarro, J., Laslo, G. W., Lerman, M. J., Gabard, A. R., Herendeen, G. J., Falco, E. E., Tomblyn, S., Burnett, L., & Fisher, J. P. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1621-7 · Cited by 125
Soman, P., Kelber, J. A., Lee, J. W., Wright, T. N., Vecchio, K. S., Klemke, R. L., & Chen, S. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.06.012 · Cited by 124
Keskar, V., Marion, N. W., Mao, J. J., & Gemeinhart, R. A. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0238 · Cited by 122
Laser-based micro/nanoengineering for biological applications
Stratakis, E. I., Ranella, A., Farsari, M., & Fotakis, C. (2009) · Progress in Quantum Electronics · doi:10.1016/j.pquantelec.2009.06.001 · Cited by 115
Lee, J. W., Ahn, G., Kim, D. S., & Cho, D. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.12.038 · Cited by 115
Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering
Han, L., Mapili, G., Chen, S., & Roy, K. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2823079 · Cited by 110
Tu, C., Cai, Q., Yang, J. H., Wan, Y., Bei, J., & Wang, S. (2003) · Polymers for Advanced Technologies · doi:10.1002/pat.370 · Cited by 109
3D Printing Phosphonium Ionic Liquid Networks with Mask Projection Microstereolithography
Schultz, A., Lambert, P. M., Chartrain, N. A., Ruohoniemi, D. M., Zhang, Z., Jangu, C., Zhang, M., Williams, C. B., & Long, T. E. (2014) · ACS Macro Letters · doi:10.1021/mz5006316 · Cited by 108
Self-citationThe History and Scope of Tissue Engineering
Vacanti, J. P., & Vacanti, C. A. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-398358-9.00001-x · Cited by 108
Lee, S., Kang, H., Park, J. K., Rhie, J., Hahn, S. K., & Cho, D. (2007) · Biomedical Microdevices · doi:10.1007/s10544-007-9129-4 · Cited by 103
Tissue-engineered skin substitutes: an overview
Catalano, E., Cochis, A., Varoni, E. M., Rimondini, L., & Azzimonti, B. (2013) · Journal of Artificial Organs · doi:10.1007/s10047-013-0734-0 · Cited by 100
Bertsch, A., Jézéquel, J. Y., & André, J. (1997) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/s1010-6030(96)04585-6 · Cited by 100
Laser stereolithography and supercritical fluid processing for custom-designed implant fabrication
Popov, V. K., Evseev, A. V., Ivanov, A. L., et al. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000011812.08185.2a · Cited by 97
Lee, J. W., Ahn, G., Kim, J. Y., & Cho, D. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4173-7 · Cited by 96
A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration
Seol, Y., Park, D. Y., Park, J. Y., Kim, S. W., Park, S. J., & Cho, D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24794 · Cited by 96
Construction of 3D biological matrices using rapid prototyping technology
Maher, P. S., Keatch, R. P., Donnelly, K., Mackay, R. E., & Paxton, J. Z. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960307 · Cited by 93
Cited by
Porous ceramics: Light in weight but heavy in energy and environment technologies
Chen, Y., Wang, N., Ola, O., Xia, Y., & Zhu, Y. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100589 · Cited by 441
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Research and application of machine learning for additive manufacturing
Qin, J., Hu, F., Liu, Y., Witherell, P., Wang, C. C. L., Rosen, D. W., Simpson, T. W., Lu, Y., & Tang, Q. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102691 · Cited by 391
3D-printed self-healing hydrogels via Digital Light Processing
Caprioli, M., Roppolo, I., Chiappone, A., Larush, L., Pirri, C. F., & Magdassi, S. (2021) · Nature Communications · doi:10.1038/s41467-021-22802-z · Cited by 335
Metadata
- Authors
- Chartrain, N. A., Williams, C. B., & Whittington, A. R.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 74
- Pages
- 90-111
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2800099205
- Cited by
- 253
- References
- 238
- FWCI
- 8.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.