The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
In situ bioprinting – Bioprinting from benchside to bedside?
Abstract
Bioprinting technologies have been advancing at the convergence of automation, digitalization, and new tissue engineering (TE) approaches. In situ bioprinting may be favored during certain situations when compared with the conventional in vitro bioprinting when de novo tissues are to be printed directly on the intended anatomical location in the living body. To date, few attempts have been made to fabricate in situ tissues, which can be safely arrested and immobilized while printing in preclinical living models. In this review, we have explained the need and utility for in situ bioprinting with regard to the conventional bioprinting approach. The two main in situ bioprinting approaches, namely, robotic arm and handheld approaches, have been defined and differentiated. The various studies involving in situ fabrication of skin, bone, and cartilage tissues have been elucidated. Finally, we have also discussed the advantages, challenges, and the prospects in the field of in situ bioprinting modalities in line with parallel technological advancements. STATEMENT OF SIGNIFICANCE: In situ bioprinting may be favored during certain situations when compared with the conventional in vitro bioprinting when tissues are to be fabricated or repaired directly on the intended anatomical location in the living body, using the body as a bioreactor. However, the technology requires a lot more improvement to fabricate complex tissues in situ, which could eventually be possible through the multi-disciplinary innovations in tissue engineering. This review explains the need and utility and current approaches by handheld and robotic for in situ bioprinting. The latest studies involving in situ fabrication of skin, bone, and cartilage tissues have been elucidated. The review also covers the background studies, advantages, technical and ethical challenges, and immense suggestions for future improvements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Tissue Engineering and Regenerative Medicine: History, Progress, and Challenges
Berthiaume, F., Maguire, T. J., & Yarmush, M. L. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114257 · Cited by 734
Artificial Dermis for Major Burns: A Multi-Center Randomized Clinical Trial
HEIMBACH, D., LUTERMAN, A., BURKE, J., CRAM, A., HERNDON, D., HUNT, J., JORDAN, M., McMANUS, W., SOLEM, L., WARDEN, G., et al. (1988) · Annals of Surgery · doi:10.1097/00000658-198809000-00008 · Cited by 683
Cited by
Zhu, Z., Ng, D. W. H., Park, H. S., & McAlpine, M. C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00235-2 · Cited by 348
Structural and biological engineering of 3D hydrogels for wound healing
Norahan, M. H., Pedroza-González, S. C., Sánchez-Salazar, M. G., Álvarez, M. M., & Trujillo de Santiago, G. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.11.019 · Cited by 338
Ansari, M. J., Rajendran, R. R., Mohanto, S., Agarwal, U., Panda, K., Dhotre, K., Manne, R., Deepak, A., Zafar, A., Yasir, M., et al. (2022) · Gels · doi:10.3390/gels8070454 · Cited by 337
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Portable hand-held bioprinters promote in situ tissue regeneration
Pazhouhnia, Z., Beheshtizadeh, N., Namini, M. S., & Lotfibakhshaiesh, N. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10307 · Cited by 60
Metadata
- Authors
- Singh, S., Choudhury, D., Yu, F., Mironov, V., & Naing, M. W.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 101
- Pages
- 14-25
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2970769725
- Cited by
- 273
- References
- 66
- FWCI
- 9.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In situ bioprinting – Bioprinting from benchside to bedside? https://app.cochat.ai/papers/10.1016/j.actbio.2019.08.045
- The paper
- Singh, S., Choudhury, D., Yu, F., Mironov, V., & Naing, M. W. (2020). In situ bioprinting – Bioprinting from benchside to bedside? Acta Biomaterialia. https://doi.org/10.1016/j.actbio.2019.08.045
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.