The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
In situ bioprinting – Bioprinting from benchside to bedside?
Abstract
Bioprinting technologies have been advancing at the convergence of automation, digitalization, and new tissue engineering (TE) approaches. In situ bioprinting may be favored during certain situations when compared with the conventional in vitro bioprinting when de novo tissues are to be printed directly on the intended anatomical location in the living body. To date, few attempts have been made to fabricate in situ tissues, which can be safely arrested and immobilized while printing in preclinical living models. In this review, we have explained the need and utility for in situ bioprinting with regard to the conventional bioprinting approach. The two main in situ bioprinting approaches, namely, robotic arm and handheld approaches, have been defined and differentiated. The various studies involving in situ fabrication of skin, bone, and cartilage tissues have been elucidated. Finally, we have also discussed the advantages, challenges, and the prospects in the field of in situ bioprinting modalities in line with parallel technological advancements. STATEMENT OF SIGNIFICANCE: In situ bioprinting may be favored during certain situations when compared with the conventional in vitro bioprinting when tissues are to be fabricated or repaired directly on the intended anatomical location in the living body, using the body as a bioreactor. However, the technology requires a lot more improvement to fabricate complex tissues in situ, which could eventually be possible through the multi-disciplinary innovations in tissue engineering. This review explains the need and utility and current approaches by handheld and robotic for in situ bioprinting. The latest studies involving in situ fabrication of skin, bone, and cartilage tissues have been elucidated. The review also covers the background studies, advantages, technical and ethical challenges, and immense suggestions for future improvements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Tissue Engineering and Regenerative Medicine: History, Progress, and Challenges
Berthiaume, F., Maguire, T. J., & Yarmush, M. L. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114257 · Cited by 734
Artificial Dermis for Major Burns: A Multi-Center Randomized Clinical Trial
HEIMBACH, D., LUTERMAN, A., BURKE, J., CRAM, A., HERNDON, D., HUNT, J., JORDAN, M., McMANUS, W., SOLEM, L., WARDEN, G., et al. (1988) · Annals of Surgery · doi:10.1097/00000658-198809000-00008 · Cited by 683
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J., & Soker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 660
Composition and Structure of Articular Cartilage: A Template for Tissue Repair
Poole, A. R., Kojima, T., Yasuda, T., Mwale, F., Kobayashi, M., & Laverty, S. (2001) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200110001-00004 · Cited by 631
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Lee, C. H., Cook, J. L., Mendelson, A., Moioli, E. K., Yao, H., & Mao, J. J. (2010) · The Lancet · doi:10.1016/s0140-6736(10)60668-x · Cited by 613
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
Albanna, M., Binder, K. W., Murphy, S. V., Kim, J., Qasem, S. A., Zhao, W., Tan, J., El-Amin, I. B., Dice, D. D., Marco, J., et al. (2019) · Scientific Reports · doi:10.1038/s41598-018-38366-w · Cited by 512
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
Keriquel, V., Oliveira, H., Rémy, M., Ziane, S., Delmond, S., Rousseau, B., Rey, S., Catros, S., Amédée, J., Guillemot, F., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-01914-x · Cited by 447
A guide to biological skin substitutes
Jones, I., Currie, L., & Martin, R. (2002) · British Journal of Plastic Surgery · doi:10.1054/bjps.2002.3800 · Cited by 439
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Cell-based tissue engineering strategies used in the clinical repair of articular cartilage
Huang, B. J., Hu, J. C., & Athanasiou, K. A. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.04.018 · Cited by 393
Shim, J.-H., Lee, J.-S., Kim, J. Y., & Cho, D.-W. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 379
Phillippi, J. A., Miller, E., Weiss, L., Huard, J., Waggoner, A., & Campbell, P. (2008) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361
Bioprinting scale-up tissue and organ constructs for transplantation
Ozbolat, I. T. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.04.005 · Cited by 350
Human Cartilage Repair with a Photoreactive Adhesive-Hydrogel Composite
Sharma, B., Fermanian, S., Gibson, M., Unterman, S., Herzka, D. A., Cascio, B., Coburn, J., Hui, A. Y., Marcus, N., Gold, G. E., et al. (2013) · Science Translational Medicine · doi:10.1126/scitranslmed.3004838 · Cited by 342
Rubin, P. J., & Yaremchuk, M. J. (1997) · Plastic and Reconstructive Surgery · doi:10.1097/00006534-199710000-00043 · Cited by 328
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
A clinical review of cartilage repair techniques
Smith, G. D., Knutsen, G., & Richardson, J. B. (2005) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.87b4.15971 · Cited by 286
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
O’Connell, C. D., Di Bella, C., Thompson, F., Augustine, C., Beirne, S., Cornock, R., Richards, C. J., Chung, J., Gambhir, S., Yue, Z., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015019 · Cited by 274
Organ-Derived Decellularized Extracellular Matrix: A Game Changer for Bioink Manufacturing?
Choudhury, D., Tun, H. W., Wang, T., & Naing, M. W. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.03.003 · Cited by 265
Self-citationLaser‐guided direct writing for three‐dimensional tissue engineering
Nahmias, Y., Schwartz, R. E., Verfaillie, C. M., & Odde, D. J. (2005) · Biotechnology and Bioengineering · doi:10.1002/bit.20585 · Cited by 264
Handheld skin printer: in situ formation of planar biomaterials and tissues
Hakimi, N., Cheng, R., Leng, L., Sotoudehfar, M., Ba, P. Q., Bakhtyar, N., Amini-Nik, S., Jeschke, M. G., & Günther, A. (2018) · Lab on a Chip · doi:10.1039/c7lc01236e · Cited by 259
3D Printed Functional and Biological Materials on Moving Freeform Surfaces
Zhu, Z., Guo, S., Hirdler, T., Eide, C., Fan, X., Tolar, J., & McAlpine, M. C. (2018) · Advanced Materials · doi:10.1002/adma.201707495 · Cited by 245
Proof-of-concept: 3D bioprinting of pigmented human skin constructs
Ng, W. L., Qi, J. T. Z., Yeong, W. Y., & Naing, M. W. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9e1e · Cited by 241
Self-citationGu, Q., Tomaskovic‐Crook, E., Wallace, G. G., & Crook, J. M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700175 · Cited by 228
Tissue engineering with the aid of inkjet printers
Campbell, P. G., & Weiss, L. E. (2007) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.7.8.1123 · Cited by 221
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Evaluation of bioprinter technologies
Ozbolat, I. T., Moncal, K. K., & Gudapati, H. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.10.003 · Cited by 202
The arrival of commercial bioprinters – Towards 3D bioprinting revolution!
Choudhury, D., Anand, S., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i2.139 · Cited by 189
Self-citationThe DLR MIRO: a versatile lightweight robot for surgical applications
Hagn, U., Nickl, M., Jörg, S., Passig, G., Bahls, T., Nothhelfer, A., Hacker, F., Le‐Tien, L., Albu‐Schäffer, A., Konietschke, R., et al. (2008) · Industrial Robot: An International Journal · doi:10.1108/01439910810876427 · Cited by 188
Brem, H. (2000) · Archives of Surgery · doi:10.1001/archsurg.135.6.627 · Cited by 182
Bioprinting functional tissues
Leberfinger, A. N., Dinda, S., Wu, Y., Koduru, S. V., Ozbolat, V., Ravnic, D. J., & Ozbolat, I. T. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.009 · Cited by 180
Purdue, G. F., Hunt, J. L., Still, J. M., Law, E. J., Herndon, D. N., Goldfarb, I. W., Schiller, W. R., Hansbrough, J. F., Hickerson, W. L., Himel, H. N., et al. (1997) · Journal of Burn Care & Rehabilitation · doi:10.1097/00004630-199701000-00009 · Cited by 174
In situ repair of bone and cartilage defects using 3D scanning and 3D printing
Li, L., Yu, F., Shi, J., Shen, S., Teng, H., Yang, J., Wang, X., & Jiang, Q. (2017) · Scientific Reports · doi:10.1038/s41598-017-10060-3 · Cited by 172
Self-citationAdditive manufacturing for in situ repair of osteochondral defects
Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169
Essential steps in bioprinting: From pre- to post-bioprinting
Datta, P., Barui, A., Wu, Y., Ozbolat, V., Moncal, K. K., & Ozbolat, I. T. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.06.003 · Cited by 165
3D bioprinting – An Ethical, Legal and Social Aspects (ELSA) framework
Vijayavenkataraman, S., Lu, W. F., & Fuh, J. Y. H. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.001 · Cited by 116
Inkjet-Mediated Gene Transfection into Living Cells Combined with Targeted Delivery
Xu, T., Rohozinski, J., Zhao, W., Moorefield, E., Atala, A., & Yoo, J. J. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0095 · Cited by 115
Ravnic, D. J., Leberfinger, A. N., Koduru, S. V., Hospodiuk, M., Moncal, K. K., Datta, P., Dey, M., Rizk, E. B., & Ozbolat, I. T. (2017) · Annals of Surgery · doi:10.1097/sla.0000000000002141 · Cited by 110
3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines
Bella, C. D., Fosang, A., Donati, D. M., Wallace, G. G., & Choong, P. (2015) · Frontiers in Surgery · doi:10.3389/fsurg.2015.00039 · Cited by 107
The trend towards in vivo bioprinting
Wang, M., He, J., Liu, Y., Li, M., Li, D., & Jin, Z. (2015) · International Journal of Bioprinting · doi:10.18063/ijb.2015.01.001 · Cited by 96
Wei, C., Lin, A. B., & Hung, S. (2014) · Cell Transplantation · doi:10.3727/096368914x678328 · Cited by 78
Hong, S., Song, S.-J., Lee, J. Y., Jang, H., Choi, J., Sun, K., & Park, Y. (2013) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2013.02.011 · Cited by 73
Sofokleous, P., Stride, E., Bonfield, W., & Edirisinghe, M. J. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.08.033 · Cited by 72
Telemanipulator for remote minimally invasive surgery
Hagn, U., Ortmaier, T., Konietschke, R., Kübler, B., Seibold, U., Tobergte, A., Nickl, M., Jörg, S., & Hirzinger, G. (2008) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2008.929925 · Cited by 68
Development of a Robotic Arm Based Hydrogel Additive Manufacturing System for In-Situ Printing
Li, X., Lian, Q., Li, D., Xin, H. J., & Jia, S. (2017) · Applied Sciences · doi:10.3390/app7010073 · Cited by 66
Douissard, J., Hagen, M. E., & Morel, P. (2019) · Springer eBooks · doi:10.1007/978-3-030-17223-7_3 · Cited by 61
Biomaterials-based in situ tissue engineering
Murdock, M. H., & Badylak, S. F. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.01.001 · Cited by 48
The osteochondral dilemma: Review of current management and future trends
Ye, K., Di Bella, C., Myers, D. E., & Choong, P. F. M. (2014) · ANZ Journal of Surgery · doi:10.1111/ans.12108 · Cited by 44
Bio‐electrosprayed Living Composite Matrix Implanted into Mouse Models
Jayasinghe, S. N., Warnes, G., & Scotton, C. J. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100131 · Cited by 36
Full-Thickness Burn of The Foot: Successful Treatment with Apligraf
Hayes, D. W., Webb, G. E., Mandracchia, V. J., & John, K. J. (2001) · Clinics in Podiatric Medicine and Surgery · doi:10.1016/s0891-8422(23)01173-4 · Cited by 26
Full-thickness burn of the foot: successful treatment with Apligraf. A case report.
Hayes, D. W., Webb, G. E., Mandracchia, V. J., et al. (2001) · PubMed · Cited by 24
Ou, K., Weng, C.-C., Wu, C.-C., Lin, Y., Chiang, H.-J., Yang, T., Wang, J., Yen, Y., Cheng, H., & Sugiatno, E. (2015) · Implant Dentistry · doi:10.1097/id.0000000000000337 · Cited by 12
Joint Cartilage Tissue Engineering and Pre-Clinical Safety and Efficacy Testing
Thomas, G., Moroni, L., Leysi-Derilou, Y., & Lise, C. (2011) · InTech eBooks · doi:10.5772/24096 · Cited by 4
Cited by
Wound Healing: From Passive to Smart Dressings
Farahani, M., & Shafiee, A. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100477 · Cited by 794
Zhu, Z., Ng, D. W. H., Park, H. S., & McAlpine, M. C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00235-2 · Cited by 348
Structural and biological engineering of 3D hydrogels for wound healing
Norahan, M. H., Pedroza-González, S. C., Sánchez-Salazar, M. G., Álvarez, M. M., & Trujillo de Santiago, G. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.11.019 · Cited by 338
Ansari, M. J., Rajendran, R. R., Mohanto, S., Agarwal, U., Panda, K., Dhotre, K., Manne, R., Deepak, A., Zafar, A., Yasir, M., et al. (2022) · Gels · doi:10.3390/gels8070454 · Cited by 337
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Metadata
- Authors
- Singh, S., Choudhury, D., Yu, F., Mironov, V., & Naing, M. W.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 101
- Pages
- 14-25
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2970769725
- Cited by
- 273
- References
- 66
- FWCI
- 9.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.