The DOI matches its Crossref record.
Measuring UV curing parameters of commercial photopolymers used in additive manufacturing
Open accessAbstract
A testing methodology was developed to expose photopolymer resins and measure the cured material to determine two key parameters related to the photopolymerization process: Ec (critical energy to initiate polymerization) and Dp (penetration depth of curing light). Five commercially available resins were evaluated under exposure from 365 nm and 405 nm light at varying power densities and energies. Three different methods for determining the thickness of the cured resin were evaluated. Caliper measurements, stylus profilometry, and confocal laser scanning microscopy showed similar results for hard materials while caliper measurement of a soft, elastomeric material proved inaccurate. Working curves for the five photopolymers showed unique behavior both within and among the resins as a function of curing light wavelength. Ec and Dp for the five resins showed variations as large as 10×. Variations of this magnitude, if unknown to the user and not controlled for, will clearly affect printed part quality. This points to the need for a standardized approach for determining and disseminating these, and perhaps, other key parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
Walker, D. A., Hedrick, J. L., & Mirkin, C. A. (2019) · Science · doi:10.1126/science.aax1562 · Cited by 459
Unkovskiy, A., Bui, P. H.-B., Schille, C., Geis-Gerstorfer, J., Huettig, F., & Spintzyk, S. (2018) · Dental Materials · doi:10.1016/j.dental.2018.09.011 · Cited by 378
The State of the Art of Material Jetting—A Critical Review
Gülcan, O., Günaydın, K., & Tamer, A. (2021) · Polymers · doi:10.3390/polym13162829 · Cited by 301
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Metadata
- Authors
- Bennett, J.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 18
- Pages
- 203-212
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2763758564
- Cited by
- 206
- References
- 0
- FWCI
- 3.54
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Measuring UV curing parameters of commercial photopolymers used in additive manufacturing. https://app.cochat.ai/papers/10.1016/j.addma.2017.10.009
- The paper
- Bennett, J. (2017). Measuring UV curing parameters of commercial photopolymers used in additive manufacturing. Additive Manufacturing. https://doi.org/10.1016/j.addma.2017.10.009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.