The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
The State of the Art of Material Jetting—A Critical Review
Open accessAbstract
Material jetting (MJ) technology is an additive manufacturing method that selectively cures liquid photopolymer to build functional parts. The use of MJ technology has increased in popularity and been adapted by different industries, ranging from biomedicine and dentistry to manufacturing and aviation, thanks to its advantages in printing parts with high dimensional accuracy and low surface roughness. To better understand the MJ technology, it is essential to address the capabilities, applications and the usage areas of MJ. Additionally, the comparison of MJ with alternative methods and its limitations need to be explained. Moreover, the parameters influencing the dimensional accuracy and mechanical properties of MJ printed parts should be stated. This paper aims to review these critical aspects of MJ manufacturing altogether to provide an overall insight into the state of the art of MJ.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
Photo-curing 3D printing technique and its challenges
Quan, H., Zhang, T., Xu, H., Luo, S., Nie, J., & Zhu, X. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.003 · Cited by 1,106
Review of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
Additive manufacturing technologies: state of the art and trends
Gardan, J. (2016) · International Journal of Production Research · doi:10.1080/00207543.2015.1115909 · Cited by 489
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Hierarchically Enhanced Impact Resistance of Bioinspired Composites
Gu, G. X., Takaffoli, M., & Buehler, M. J. (2017) · Advanced Materials · doi:10.1002/adma.201700060 · Cited by 396
3D-printed upper limb prostheses: a review
ten Kate, J., Smit, G., & Breedveld, P. (2017) · Disability and Rehabilitation: Assistive Technology · doi:10.1080/17483107.2016.1253117 · Cited by 374
Accuracy of medical models made by additive manufacturing (rapid manufacturing)
Salmi, M., Paloheimo, K.-S., Tuomi, J., Wolff, J., & Mäkitie, A. (2013) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2012.11.041 · Cited by 330
Cited by
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
A systematic review of digital transformation technologies in museum exhibition
Li, J., Zheng, X., Watanabe, I., & Ochiai, Y. (2024) · Computers in Human Behavior · doi:10.1016/j.chb.2024.108407 · Cited by 136
Review of High-Performance Sustainable Polymers in Additive Manufacturing
Chyr, G., & DeSimone, J. M. (2023) · Green Chemistry · doi:10.1039/d2gc03474c · Cited by 136
Mahmood, M. A., Chioibasu, D., Ur Rehman, A., Mihai, S., & Popescu, A. C. (2022) · Metals · doi:10.3390/met12010077 · Cited by 119
Metadata
- Authors
- Gülcan, O., Günaydın, K., & Tamer, A.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-08-23
- Volume
- 13
- Issue
- 16
- Pages
- 2829
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3194799905
- Cited by
- 301
- References
- 58
- FWCI
- 13.07
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The State of the Art of Material Jetting—A Critical Review. https://app.cochat.ai/papers/10.3390/polym13162829
- The paper
- Gülcan, O., Günaydın, K., & Tamer, A. (2021). The State of the Art of Material Jetting—A Critical Review. Polymers. https://doi.org/10.3390/polym13162829
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.