The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
In-Process monitoring of porosity during laser additive manufacturing process
Abstract
This paper describes a deep-learning-based method for porosity monitoring in laser additive manufacturing process. A high-speed digital camera was mounted coaxially to the process laser beam for in-process sensing of melt-pool data, and convolutional neural network models were designed to learn melt-pool features to predict the porosity attributes in deposited specimens during laser additive manufacturing. With the image processing tools developed in this paper, the extraction of porosity information from raw quality inspection data, such as cross-section images and tomography data sets, can be automated. The CNN models with a compact architecture, part of whose hyperparameters were selected through cross-validation analysis, achieved a classification accuracy of 91.2% for porosity occurrence detection in the direct laser deposition of sponge Titanium powders and presented predictive capacity for micro pores below 100 μm. For local volume porosity prediction, the model also achieved a root mean square error of 1.32% and exhibited high fidelity for both high porosity and low porosity specimens.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Adam: A Method for Stochastic Optimization
Kingma, D. P., & Ba, J. (2014) · arXiv · doi:10.48550/arxiv.1412.6980 · Cited by 98,946
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift
Ioffe, S., & Szegedy, C. (2015) · arXiv · doi:10.48550/arxiv.1502.03167 · Cited by 27,818
Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift
Ioffe, S. (2024) · arXiv (Cornell University) · doi:10.57702/o9raffed · Cited by 14,214
Speeded-Up Robust Features (SURF)
Bay, H., Ess, A., Tuytelaars, T., & Van Gool, L. (2008) · Computer Vision and Image Understanding · doi:10.1016/j.cviu.2007.09.014 · Cited by 13,557
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Self-citationWang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Clijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Slotwinski, J. A., Garboczi, E. J., & Hebenstreit, K. M. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.019 · Cited by 408
Zhang, Y., Hong, G. S., Ye, D., Zhu, K., & Fuh, J. Y. H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.002 · Cited by 335
Sensing, modeling and control for laser-based additive manufacturing
Hu, D., & Kovacevic, R. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00163-3 · Cited by 329
Control of melt pool temperature and deposition height during direct metal deposition process
Song, L., Bagavath-Singh, V., Dutta, B., & Mazumder, J. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3395-2 · Cited by 283
Khanzadeh, M., Chowdhury, S., Tschopp, M. A., Doude, H. R., Marufuzzaman, M., & Bian, L. (2019) · IISE Transactions · doi:10.1080/24725854.2017.1417656 · Cited by 278
Detection of Process Failures in Layerwise Laser Melting with Optical Process Monitoring
Craeghs, T., Clijsters, S., Kruth, J.-P., Bechmann, F., & Ebert, M.-C. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.097 · Cited by 226
DePond, P. J., Guss, G., Ly, S., Calta, N. P., Deane, D., Khairallah, S., & Matthews, M. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.050 · Cited by 222
In situ surface topography of laser powder bed fusion using fringe projection
Zhang, B., Ziegert, J. C., Farahi, F., & Davies, A. D. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.08.001 · Cited by 167
Self-citationKhanzadeh, M., Tian, W., Yadollahi, A., Doude, H., Tschopp, M. A., & Bian, L. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.08.014 · Cited by 149
Thermography for Monitoring the Selective Laser Melting Process
Krauss, H., Eschey, C., & Zaeh, M. F. (2012) · doi:10.26153/tsw/15406 · Cited by 149
Characterization of in-situ measurements based on layerwise imaging in laser powder bed fusion
Caltanissetta, F., Grasso, M., Petrò, S., & Colosimo, B. M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.09.017 · Cited by 122
Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision
Xiong, J., & Zhang, G. (2013) · Measurement Science and Technology · doi:10.1088/0957-0233/24/11/115103 · Cited by 104
Montazeri, M., & Rao, P. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040264 · Cited by 99
Vision-based defect detection in laser metal deposition process
Barua, S., Liou, F., Newkirk, J. W., & Sparks, T. E. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2012-0036 · Cited by 98
Closed-loop automatic feedback control in electron beam melting
Mireles, J., Terrazas, C. A., Gaytan, S. M., Roberson, D. A., & Wicker, R. B. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6708-4 · Cited by 58
Cited by
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404
Research and application of machine learning for additive manufacturing
Qin, J., Hu, F., Liu, Y., Witherell, P., Wang, C. C. L., Rosen, D. W., Simpson, T. W., Lu, Y., & Tang, Q. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102691 · Cited by 391
Machine learning and deep learning based predictive quality in manufacturing: a systematic review
Tercan, H., & Meisen, T. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-01963-8 · Cited by 376
Jiang, J., & Ma, Y. (2020) · Micromachines · doi:10.3390/mi11070633 · Cited by 279
Metadata
- Authors
- Zhang, B., Liu, S., & Shin, Y. C.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 28
- Pages
- 497-505
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2946987235
- Cited by
- 281
- References
- 29
- FWCI
- 15.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.