The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring
Abstract
Abstract With the continuous development of additive manufacturing technique, the issue on built quality has caught increasing attentions. To improve the quality of built parts, the process monitoring and control has been emphasized as a promising solution. Despite a large number of studies on the development of sensors and instrumentations, the investigation on statistical analysis, modelling and automatic anomalies detection is still at an infant stage. To advance the related research, the intelligent classification methods, support vector machines (SVM) and convolutional neural network (CNN), were proposed for quality level identification in this work. A vision system with high speed camera was used for process images acquisition. The features of different objects including melt pool, plume and spatter were extracted based on the AM process understanding. The corresponding feature vectors were used as the input for the SVM classification. The results indicated the information from different objects is sensitive to different types of quality anomalies. Moreover, the combination of features from these three objects can significantly improve the classification accuracy to 90.1%. Additionally, the comparison between SVM and CNN was also conducted, the high accuracy of 92.7% for the CNN model demonstrated that it is a promising method for quality level identification by using the vision system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
A comparison of methods for multiclass support vector machines
Hsu, C.-W., & Lin, C.-J. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/72.991427 · Cited by 6,838
A Practical Guide to Support Vector Classication
Hsu, C., Chang, C.-C., & Lin, C. (2008) · Cited by 5,046
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Chen, F.-C., & Jahanshahi, M. R. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2764844 · Cited by 930
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Cited by
Machine learning in additive manufacturing: State-of-the-art and perspectives
Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101538 · Cited by 693
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Qi, X., Chen, G., Li, Y., Cheng, X., & Li, C. (2019) · Engineering · doi:10.1016/j.eng.2019.04.012 · Cited by 529
Machine Learning in Additive Manufacturing: A Review
Meng, L., McWilliams, B., Jarosinski, W., Park, H.-Y., Jung, Y.-G., Lee, J., & Zhang, J. (2020) · JOM · doi:10.1007/s11837-020-04155-y · Cited by 470
A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system
Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., Chen, S., & Zhang, Y. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.008 · Cited by 460
Self-citation
Metadata
- Authors
- Zhang, Y., Hong, G. S., Ye, D., Zhu, K., & Fuh, J. Y. H.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 156
- Pages
- 458-469
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2809775572
- Cited by
- 335
- References
- 51
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring. https://app.cochat.ai/papers/10.1016/j.matdes.2018.07.002
- The paper
- Zhang, Y., Hong, G. S., Ye, D., Zhu, K., & Fuh, J. Y. H. (2018). Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring. Materials & Design. https://doi.org/10.1016/j.matdes.2018.07.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.