The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Open accessAbstract
Abstract Functionally graded materials (FGMs) have attracted much research interest in the industry due to their graded material properties, which result from gradually distributed compositions or structures. In recent years, metallic FGMs have been widely studied, and additive manufacturing (AM) has become an important approach to build metallic FGMs. This paper aims to provide an overview of the research progress in metallic FGMs fabricated by laser metal deposition (LMD), an AM process that is widely used in metallic materials. Firstly, the unique material properties and advantages of FGMs are introduced. Then, typical recent findings in transition path design, fabrication, and characterization for different types of metallic FGMs via LMD are summarized and discussed. Finally, challenges in fabricating metallic FGMs via LMD are discussed, and other related aspects in the area of FGMs such as model representation and numerical simulation are proposed for further investigation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
DeVierno, A., Thorn, B. K., & Carrano, A. L. (2013) · DigitalCommons - Fairfield (Fairfield University) · Cited by 1,457
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Functionally graded materials: A review of fabrication and properties
Naebe, M., & Shirvanimoghaddam, K. (2016) · Applied Materials Today · doi:10.1016/j.apmt.2016.10.001 · Cited by 986
Processing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Carroll, B. E., Otis, R., Borgonia, J. P., Suh, J.-O., Dillon, R. P., Shapiro, A. A., Hofmann, D. C., Liu, Z., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.019 · Cited by 657
Functionally graded materials for biomedical applications
Pompe, W., Worch, H., Epple, M., Friess, W., Gelinsky, M., Greil, P., Hempel, U., Scharnweber, D., & Schulte, K. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00580-x · Cited by 575
Al-saedi, D. S. J., Masood, S. H., Faizan‐Ur‐Rab, M., Alomarah, A., & Ponnusamy, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.059 · Cited by 527
Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.006 · Cited by 481
Functionally Graded Composite Materials: An Overview
Gururaja, U., Rao, S. S., & Gangadharan, K. V. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.442 · Cited by 466
Bobbio, L. D., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., Liu, Z., & Beese, A. M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.070 · Cited by 447
Mahmoud, D., & Elbestawi, M. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1020013 · Cited by 338
Direct laser processing of a tantalum coating on titanium for bone replacement structures
Balla, V. K., Banerjee, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.021 · Cited by 333
Functionally graded material: an overview
Mahamood, R. M., Akinlabi, E. T., Shukla, M., & Pityana, S. L. (2012) · Research Portal (Queen's University Belfast) · Cited by 332
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Hofmann, D. C., Roberts, S., Otis, R., Kolodziejska, J., Dillon, R. P., Suh, J.-O., Shapiro, A. A., Liu, Z.-K., & Borgonia, J.-P. (2014) · Scientific Reports · doi:10.1038/srep05357 · Cited by 314
Hu, Y., & Cong, W. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.08.083 · Cited by 276
Reichardt, A., Dillon, R. P., Borgonia, J. P., Shapiro, A. A., McEnerney, B. W., Momose, T., & Hosemann, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.016 · Cited by 275
Onuike, B., Heer, B., & Bandyopadhyay, A. K. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.007 · Cited by 232
Stainless steel to titanium bimetallic structure using LENS™
Sahasrabudhe, H., Harrison, R., Carpenter, C. B., & Bandyopadhyay, A. K. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.10.002 · Cited by 178
Heterogeneous object modeling: A review
Kou, X. Y., & Tan, S. T. (2007) · Computer-Aided Design · doi:10.1016/j.cad.2006.12.007 · Cited by 159
Muller, P., Mognol, P., & Hascoët, J.-Y. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.020 · Cited by 156
Functionally graded materials synthesis via low vacuum directed vapor deposition
Groves, J. F., & Wadley, H. N. G. (1997) · Composites Part B Engineering · doi:10.1016/s1359-8368(96)00023-6 · Cited by 117
Synthesis of functionally graded material H13/Cu by LENS technology
Artiček, U., Milfelner, M., & Anžel, I. (2013) · Advances in Production Engineering & Management · doi:10.14743/apem2013.3.164 · Cited by 62
Multi-Material Processing By Lens
Smugeresky, J. E. (2018) · doi:10.15781/t21j97t99 · Cited by 61
Igarashi, T. (2017) · Seikei-Kakou · doi:10.4325/seikeikakou.29.254 · Cited by 34
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
A review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Saleh, B., Jiang, J., Fathi, R., Al-hababi, T., Xu, Q., Wang, L., Song, D., & Ma, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108376 · Cited by 738
Additive manufacturing of metamaterials: A review
Askari, M., Hutchins, D. A., Thomas, P. J., Astolfi, L., Watson, R. L., Abdi, M., Ricci, M., Laureti, S., Nie, L., Freear, S., et al. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101562 · Cited by 470
Metadata
- Authors
- Yan, L., Chen, Y., & Liou, F.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 31
- Pages
- 100901
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2985248673
- Cited by
- 367
- References
- 28
- FWCI
- 20.80
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.