Effects of annealing on the structure and mechanical properties of FeCoCrNi high-entropy alloy fabricated via selective laser melting
The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
Abstract To widen the applications of FeCoCrNi high-entropy alloys (HEAs) fabricated via selective laser melting, their mechanical properties must be improved, and annealing plays an important role in this regard. In this study, the microstructure, residual stress, and mechanical properties of the as-printed specimen and specimens annealed at 773–1573 K for 2 h were compared. As the annealing temperature increased, the specimen structure recrystallized from all columnar grains to equiaxial grains containing numerous annealing twins. The dislocation network, which formed during the solidification process under considerable shrinkage strain, decomposed into dislocations. The residual stress, yield strength, and hardness decreased, while the plasticity and impact toughness increased. During the deformation of as-printed and low-temperature-annealed specimens, the dislocation network remained unchanged and provided resistance to the dislocations moving within it, thus strengthening the specimen. The tensile strength remained largely unchanged owing to the reduction in the residual stress during low-temperature annealing, as well as the formation of the twinning network and dislocation wall under large deformation upon high-temperature annealing. Meanwhile, the ductility greatly increased, thus increasing the potential for industrial application of HEAs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Mechanism-based strain gradient plasticity— I. Theory
Gao, H., Huang, Y., Nix, W. D., & Hutchinson, J. W. (1999) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(98)00103-3 · Cited by 2,261
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues
Kubin, L. P., & Mortensen, A. (2002) · Scripta Materialia · doi:10.1016/s1359-6462(02)00335-4 · Cited by 1,231
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Mechanical properties of copper/bronze laminates: Role of interfaces
Ma, X., Huang, C., Moering, J., Ruppert, M., Höppel, H. W., Göken, M., Narayan, J., & Zhu, Y. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.023 · Cited by 871
Zhu, Z. G., Nguyen, Q. B., Ng, F. L., An, X. H., Liao, X. Z., Liaw, P. K., Nai, S. M. L., & Wei, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.05.015 · Cited by 653
Formation of metastable cellular microstructures in selective laser melted alloys
Prashanth, K. G., & Eckert, J. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.209 · Cited by 597
Li, R., Niu, P., Yuan, T., Cao, P., Chen, C., & Zhou, K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.298 · Cited by 572
The use of high-entropy alloys in additive manufacturing
Brif, Y., Thomas, M., & Todd, I. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.11.037 · Cited by 540
Wang, Y., Liu, B., Yan, K., Wang, M., Kabra, S., Chiu, Y., Dye, D., Lee, P. D., Liu, Y., & Cai, B. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.013 · Cited by 341
Tong, Z., Ren, X., Jiao, J., Zhou, W., Ren, Y., Ye, Y., Larson, E. A., & Gu, J. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.01.213 · Cited by 304
Solid-solution strengthening in refractory high entropy alloys
Coury, F. G., Kaufman, M., & Clarke, A. J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.006 · Cited by 290
Low temperature annealing dedicated to AlSi10Mg selective laser melting products
Fiocchi, J., Tuissi, A., Bassani, P., & Biffi, C. A. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.019 · Cited by 215
Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction
Cai, B., Liu, B., Kabra, S., Wang, Y., Yan, K., Lee, P. D., & Liu, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.01.034 · Cited by 214
Fujieda, T., Chen, M., Shiratori, H., Kuwabara, K., Yamanaka, K., Koizumi, Y., Chiba, A., & Watanabe, S. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.023 · Cited by 186
Wu, W., Zhou, R., Wei, B., Ni, S., Liu, Y., & Song, M. J. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.08.019 · Cited by 177
Zhou, Y., Zhang, Z., Wang, Y. P., Liu, G., Zhou, S., Li, Y., Shen, J., & Yan, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.046 · Cited by 171
Li, X. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700874 · Cited by 151
Průša, F., Šenková, A., Kučera, V., Čapek, J., & Vojtěch, D. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.08.014 · Cited by 77
Cited by
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Sing, S. L., Huang, S., Goh, G. D., Goh, G. L., Tey, C. F., Tan, J. H. K., & Yeong, W. Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100795 · Cited by 328
Additive manufactured high entropy alloys: A review of the microstructure and properties
Zhang, W., Chabok, A., Kooi, B. J., & Pei, Y. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110875 · Cited by 255
Metadata
- Authors
- Lin, D., Xu, L., Jing, H., Han, Y., Zhao, L., & Minami, F.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 32
- Pages
- 101058
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2999873437
- Cited by
- 235
- References
- 24
- FWCI
- 14.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.