The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Digital Twins for the built environment: learning from conceptual and process models in manufacturing
Open accessAbstract
The overall aim of this paper is to contribute to a better understanding of the Digital Twin (DT) paradigm in the built environment by drawing inspiration from existing DT research in manufacturing. The DT is a Product Life Management information construct that has migrated to the built environment while research on the subject has grown intensely in recent years. Common to early research phases, DT research in the built environment has developed organically, setting the basis for mature definitions and robust research frameworks. As DT research in manufacturing is the most developed, this paper seeks to advance the understanding of DTs in the built environment by analysing how the DT systems reported in manufacturing literature are structured and how they function. Firstly, this paper presents a thorough review and a comparison of DT, cyber-physical systems (CPS), and building information modelling (BIM). Then, the results of the review and categorisation of DT structural and functional descriptions are presented. Fifty-four academic publications and industry reports were reviewed, and their structural and functional descriptions were analysed in detail. Three types of structural models (i.e. conceptual models, system architectures, and data models) and three types of functional models (process and communication models) were identified. DT maturity models were reviewed as well. From the reviewed descriptions, four categories of DT conceptual models (prototypical, model-based, interface-oriented, and service-based) and six categories of DT process models (DT creation, DT synchronisation, asset monitoring, prognosis and simulation, optimal operations, and optimised design) were defined and its applicability to the AECO assessed. While model-based and service-based models are the most applicable to the built environment, amendments are still required. Prognosis and simulation process models are the most widely applicable for AECO use-cases. The main contribution to knowledge of this study is that it compiles the DT’s structural and functional descriptions used in manufacturing and it provides the basis to develop DT conceptual and process models specific to requirements of the built environment sectors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727
Digital Twin in manufacturing: A categorical literature review and classification
Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.474 · Cited by 3,612
An introduction to structural health monitoring
Farrar, C. R., & Worden, K. (2007) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2006.1928 · Cited by 2,628
Characterising the Digital Twin: A systematic literature review
Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2020.02.002 · Cited by 2,422
The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 2,404
A Review of the Roles of Digital Twin in CPS-based Production Systems
Negri, E., Fumagalli, L., & Macchi, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.198 · Cited by 1,669
Lu, Y., Liu, C., Wang, K. I.-K., Huang, H., & Xu, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101837 · Cited by 1,624
Enabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Tao, F., Qi, Q., Wang, L., & Nee, A. Y. C. (2019) · Engineering · doi:10.1016/j.eng.2019.01.014 · Cited by 1,487
A survey on digital twin: definitions, characteristics, applications, and design implications
Barricelli, B. R., Casiraghi, E., & Fogli, D. (2019) · IEEE Access · doi:10.1109/access.2019.2953499 · Cited by 1,480
Cited by
Abioye, S. O., Oyedele, L. O., Akanbi, L., Ajayi, A., Davila Delgado, J. M., Bilal, M., Akinade, O. O., & Ahmed, A. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103299 · Cited by 1,015
Self-citationHimeur, Y., Elnour, M., Fadli, F., Meskin, N., Petri, I., Rezgui, Y., Bensaali, F., & Amira, A. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-022-10286-2 · Cited by 541
Design, Modeling and Implementation of Digital Twins
Segovia, M., & Garcia-Alfaro, J. (2022) · Sensors · doi:10.3390/s22145396 · Cited by 332
Saka, A. B., Oyedele, L. O., Akanbi, L. A., Ganiyu, S. A., Chan, D. W. M., & Bello, S. A. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101869 · Cited by 161
Self-citationKnowledge graph-based data integration system for digital twins of built assets
Ramonell, C., Chacón, R., & Posada, H. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.105109 · Cited by 130
Metadata
- Authors
- Davila Delgado, J. M., & Oyedele, L.
- Venue
- Advanced Engineering Informatics
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 49
- Pages
- 101332
- ISSN
- 1474-0346 (ISSN-L)
- OpenAlex
- W3173458433
- Cited by
- 257
- References
- 96
- FWCI
- 19.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Digital Twins for the built environment: learning from conceptual and process models in manufacturing. https://app.cochat.ai/papers/10.1016/j.aei.2021.101332
- The paper
- Davila Delgado, J. M., & Oyedele, L. (2021). Digital Twins for the built environment: learning from conceptual and process models in manufacturing. Advanced Engineering Informatics. https://doi.org/10.1016/j.aei.2021.101332
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.