The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Digital Twins for the built environment: learning from conceptual and process models in manufacturing
Open accessAbstract
The overall aim of this paper is to contribute to a better understanding of the Digital Twin (DT) paradigm in the built environment by drawing inspiration from existing DT research in manufacturing. The DT is a Product Life Management information construct that has migrated to the built environment while research on the subject has grown intensely in recent years. Common to early research phases, DT research in the built environment has developed organically, setting the basis for mature definitions and robust research frameworks. As DT research in manufacturing is the most developed, this paper seeks to advance the understanding of DTs in the built environment by analysing how the DT systems reported in manufacturing literature are structured and how they function. Firstly, this paper presents a thorough review and a comparison of DT, cyber-physical systems (CPS), and building information modelling (BIM). Then, the results of the review and categorisation of DT structural and functional descriptions are presented. Fifty-four academic publications and industry reports were reviewed, and their structural and functional descriptions were analysed in detail. Three types of structural models (i.e. conceptual models, system architectures, and data models) and three types of functional models (process and communication models) were identified. DT maturity models were reviewed as well. From the reviewed descriptions, four categories of DT conceptual models (prototypical, model-based, interface-oriented, and service-based) and six categories of DT process models (DT creation, DT synchronisation, asset monitoring, prognosis and simulation, optimal operations, and optimised design) were defined and its applicability to the AECO assessed. While model-based and service-based models are the most applicable to the built environment, amendments are still required. Prognosis and simulation process models are the most widely applicable for AECO use-cases. The main contribution to knowledge of this study is that it compiles the DT’s structural and functional descriptions used in manufacturing and it provides the basis to develop DT conceptual and process models specific to requirements of the built environment sectors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727
Digital Twin in manufacturing: A categorical literature review and classification
Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.474 · Cited by 3,612
The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 3,395
An introduction to structural health monitoring
Farrar, C. R., & Worden, K. (2007) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2006.1928 · Cited by 2,628
Characterising the Digital Twin: A systematic literature review
Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2020.02.002 · Cited by 2,422
A Review of the Roles of Digital Twin in CPS-based Production Systems
Negri, E., Fumagalli, L., & Macchi, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.198 · Cited by 1,669
Lu, Y., Liu, C., Wang, K. I.-K., Huang, H., & Xu, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101837 · Cited by 1,624
Enabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Tao, F., Qi, Q., Wang, L., & Nee, A. Y. C. (2019) · Engineering · doi:10.1016/j.eng.2019.01.014 · Cited by 1,487
A survey on digital twin: definitions, characteristics, applications, and design implications
Barricelli, B. R., Casiraghi, E., & Fogli, D. (2019) · IEEE Access · doi:10.1109/access.2019.2953499 · Cited by 1,480
Towards a semantic Construction Digital Twin: Directions for future research
Boje, C., Guerriero, A., Kubicki, S., & Rezgui, Y. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103179 · Cited by 1,324
Capability maturity model, version 1.1
Paulk, M. C., Curtis, B., Chrissis, M. B., & Weber, C. V. (1993) · IEEE Software · doi:10.1109/52.219617 · Cited by 1,263
Digital twin-driven product design framework
Tao, F., Sui, F., Liu, A., Qi, Q., Zhang, M., Song, B., Guo, Z., Lu, S. C.-Y., & Nee, A. Y. C. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1443229 · Cited by 1,187
Systematic Approaches to a Successful Literature Review
Booth, A., Sutton, A., Clowes, M., & Martyn-St James, M. (2022) · SAGE Publications Ltd eBooks · doi:10.4135/9781036232009 · Cited by 1,172
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119
Theory of Modeling and Simulation: Integrating Discrete Event and Continuous Complex Dynamic Systems
Zeigler, B. P., Praehofer, H., & Kim, T. G. (2000) · Cited by 1,098
Leveraging Digital Twin Technology in Model-Based Systems Engineering
Madni, A. M., Madni, C. C., & Lucero, S. D. (2019) · Systems · doi:10.3390/systems7010007 · Cited by 1,050
Digital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000
Sacks, R., Eastman, C., Lee, G., & Teicholz, P. (2018) · Wiley eBooks · doi:10.1002/9781119287568 · Cited by 884
Level of Detail for 3D Graphics
Luebke, D. P., Reddy, M., Cohen, J. D., Varshney, A., Watson, B. A., & Huebner, R. J. (2012) · Cited by 821
Product lifecycle management: the new paradigm for enterprises
Grieves, M. W. (2005) · International Journal of Product Development · doi:10.1504/ijpd.2005.006669 · Cited by 741
The maturity of maturity model research: A systematic mapping study
Wendler, R. (2012) · Information and Software Technology · doi:10.1016/j.infsof.2012.07.007 · Cited by 693
Digital Twin as a Service (DTaaS) in Industry 4.0: An Architecture Reference Model
Aheleroff, S., Xu, X., Zhong, R. Y., & Lu, Y. (2021) · Advanced Engineering Informatics · doi:10.1016/j.aei.2020.101225 · Cited by 658
Larman, C. (2004) · Prentice Hall PTR eBooks · Cited by 630
Construction with digital twin information systems
Sacks, R., Brilakis, I., Pikas, E., Xie, H. S., & Girolami, M. (2020) · Data-Centric Engineering · doi:10.1017/dce.2020.16 · Cited by 609
Monostori, L. (2019) · CIRP Encyclopedia of Production Engineering · doi:10.1007/978-3-662-53120-4_16790 · Cited by 606
How to tell the difference between a model and a digital twin
Wright, L., & Davidson, S. (2020) · Advanced Modeling and Simulation in Engineering Sciences · doi:10.1186/s40323-020-00147-4 · Cited by 601
Digital Twin: Vision, Benefits, Boundaries, and Creation for Buildings
Khajavi, S. H., Motlagh, N. H., Jaribion, A., Werner, L. C., & Holmstrom, J. (2019) · IEEE Access · doi:10.1109/access.2019.2946515 · Cited by 597
Developing a Digital Twin at Building and City Levels: Case Study of West Cambridge Campus
Lu, Q., Parlikad, A. K., Woodall, P., Don Ranasinghe, G., Xie, X., Liang, Z., Konstantinou, E., Heaton, J., & Schooling, J. (2020) · Journal of Management in Engineering · doi:10.1061/(asce)me.1943-5479.0000763 · Cited by 531
Digital twin-enabled anomaly detection for built asset monitoring in operation and maintenance
Lu, Q., Xie, X., Parlikad, A. K., & Schooling, J. M. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103277 · Cited by 481
Digital twin-driven manufacturing cyber-physical system for parallel controlling of smart workshop
Leng, J., Zhang, H., Yan, D., Liu, Q., Chen, X., & Zhang, D. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0881-5 · Cited by 475
A systematic design approach for service innovation of smart product-service systems
Zheng, P., Lin, T.-J., Chen, C.-H., & Xu, X. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.101 · Cited by 414
Principles of Cyber-Physical Systems
Alur, R. (2020) · Cambridge University Press eBooks · doi:10.1017/9781107588981 · Cited by 412
Product Lifecycle Management: Driving the Next Generation of Lean Thinking
Grieves, M. W. (2005) · Cited by 370
Virtually Intelligent Product Systems: Digital and Physical Twins
Grieves, M. W. (2019) · Complex Systems Engineering: Theory and Practice · doi:10.2514/5.9781624105654.0175.0200 · Cited by 356
Development and operation of Digital Twins for technical systems and services
Stark, R., Fresemann, C., & Lindow, K. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.04.024 · Cited by 352
Penttilä, H. (2006) · Journal of Information Technology in Construction · Cited by 332
Digital twin modeling method based on biomimicry for machining aerospace components
Liu, S., Bao, J., Lu, Y., Li, J., Lu, S., & Sun, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.014 · Cited by 310
An architecture of an intelligent digital twin in a cyber-physical production system
Ashtari Talkhestani, B., Jung, T., Lindemann, B., Sahlab, N., Jazdi, N., Schloegl, W., & Weyrich, M. (2019) · at - Automatisierungstechnik · doi:10.1515/auto-2019-0039 · Cited by 300
Lu, Y., & Xu, X. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2018.11.006 · Cited by 294
Loonen, R. C. G. M., Favoino, F., Hensen, J. L. M., & Overend, M. (2017) · Journal of Building Performance Simulation · doi:10.1080/19401493.2016.1152303 · Cited by 259
The Airframe Digital Twin: Some Challenges to Realization
Tuegel, E. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1812 · Cited by 255
Charef, R., Alaka, H., & Emmitt, S. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.04.028 · Cited by 255
Smart Cities with Digital Twin Systems for Disaster Management
Ford, D. N., & Wolf, C. M. (2020) · Journal of Management in Engineering · doi:10.1061/(asce)me.1943-5479.0000779 · Cited by 246
Simulation of occupancy in buildings
Feng, X., Yan, D., & Hong, T. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.067 · Cited by 234
Modelling multiple views on buildings
van Nederveen, G. A., & Tolman, F. P. (1992) · Automation in Construction · doi:10.1016/0926-5805(92)90014-b · Cited by 223
Design and implementation of a digital twin application for a connected micro smart factory
Park, K. T., Nam, Y. W., Lee, H. S., Im, S. J., Noh, S. D., Son, J. Y., & Kim, H. (2019) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2019.1599439 · Cited by 194
Wang, P., & Luo, M. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.11.012 · Cited by 181
Zheng, P., & Sivabalan, A. S. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.101958 · Cited by 176
An open source approach to the design and implementation of Digital Twins for Smart Manufacturing
Damjanovic-Behrendt, V., & Behrendt, W. (2019) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2019.1599436 · Cited by 163
Chen, G., Wang, P., Feng, B., Li, Y., & Liu, D. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2019.1699254 · Cited by 162
From justification to evaluation: Building information modeling for asset owners
Love, P. E. D., Simpson, I., Hill, A., & Standing, C. (2013) · Automation in Construction · doi:10.1016/j.autcon.2013.05.008 · Cited by 154
Vrabič, R., Erkoyuncu, J. A., Butala, P., & Roy, R. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.10.167 · Cited by 151
Wang, Y., Wang, S., Yang, B., Zhu, L., & Liu, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119299 · Cited by 148
Digital twin-based opti-state control method for a synchronized production operation system
Zhang, K., Qu, T., Zhou, D., Jiang, H., Lin, Y., Li, P., Guo, H., Liu, Y., Li, C., & Huang, G. Q. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101892 · Cited by 141
Digital twin-driven cyber-physical production system towards smart shop-floor
Zhang, H., Zhang, G., & Yan, Q. (2018) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-1125-4 · Cited by 139
The progress and trend of BIM research: A bibliometrics-based visualization analysis
Wen, Q., Ren, Z.-J., Lu, H., & Wu, J.-F. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103558 · Cited by 130
Building Information Modeling: Technology Foundations and Industry Practice
Borrmann, A., König, M., Beetz, J., & Koch, C. (2018) · Cited by 115
Angrish, A., Starly, B., Lee, Y., & Cohen, P. H. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.10.003 · Cited by 109
Experimentable digital twins for model-based systems engineering and simulation-based development
Schluse, M., Atorf, L., & Roßmann, J. (2017) · IEEE International Systems Conference (SysCon) · doi:10.1109/syscon.2017.7934796 · Cited by 108
Koulamas, C., & Kalogeras, A. P. (2018) · Computer · doi:10.1109/mc.2018.2876181 · Cited by 107
Simulation-ready digital twin for realtime management of logistics systems
Korth, B., Schwede, C., & Zajac, M. (2018) · IEEE International Conference on Big Data (BigData) · doi:10.1109/bigdata.2018.8622160 · Cited by 101
Murray, S. N., Walsh, B. P., Kelliher, D., & O'Sullivan, D. T. J. (2014) · Building and Environment · doi:10.1016/j.buildenv.2014.01.011 · Cited by 93
A generic building product model incorporating building type information
Eastman, C. M., & Siabiris, A. (1995) · Automation in Construction · doi:10.1016/0926-5805(94)00028-l · Cited by 93
Structural performance monitoring using a dynamic data-driven BIM environment
Delgado, J. M. D., Butler, L., Brilakis, I., Elshafie, M. Z. E. B., & Middleton, C. R. (2018) · UWE Research Repository (UWE Bristol) · doi:10.1061/%28asce%29cp.1943-5487.0000749 · Cited by 92
Automating the creation of building information models for existing buildings
Bortoluzzi, B. S. K., Efremov, I., Medina, C., Sobieraj, D., & McArthur, J. J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102838 · Cited by 89
Management of structural monitoring data of bridges using BIM
Delgado, J. M. D., Butler, L., Gibbons, N., Brilakis, I., Elshafie, M., & Middleton, C. (2016) · Proceedings of the Institution of Civil Engineers - Bridge Engineering · doi:10.1680/jbren.16.00013 · Cited by 89
Digital Twin for Smart Manufacturing: The Simulation Aspect
Shao, G., Jain, S., Laroque, C., Lee, L., Lendermann, P., & Rose, O. (2019) · Online World Conference on Soft Computing in Industrial Applications · doi:10.1109/wsc40007.2019.9004659 · Cited by 86
5-Dimensional Definition for a Manufacturing Digital Twin
Bazaz, S. M., Lohtander, M., & Varis, J. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.01.107 · Cited by 77
Digital Twins as the Next Phase of Cyber-Physical Systems in Construction
Kan, C., & Anumba, D. O. C. (2019) · ASCE International Conference on Computing in Civil Engineering (i3CE) · doi:10.1061/9780784482438.033 · Cited by 74
Complex Systems Engineering: Theory and Practice
(2019) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/4.105654 · Cited by 74
Bolton, A., Butler, L., Dabson, I., et al. (2018) · Cambridge University Engineering Department Publications Database · doi:10.17863/cam.32260 · Cited by 73
Towards an extended model-based definition for the digital twin
Miller, A. M., Alvarez, R., & Hartman, N. (2018) · Computer-Aided Design and Applications · doi:10.1080/16864360.2018.1462569 · Cited by 71
A digital twin-based approach for the management of geometrical deviations during assembly processes
Grégorio, J.-L., Lartigue, C., Thiébaut, F., & Lebrun, R. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.020 · Cited by 71
The Modeling and Using Strategy for the Digital Twin in Process Planning
Zhao, P., Liu, J., Jing, X., Tang, M., Sheng, S., Zhou, H., & Liu, X. (2020) · IEEE Access · doi:10.1109/access.2020.2974241 · Cited by 70
Operation Procedures of a Work-Center-Level Digital Twin for Sustainable and Smart Manufacturing
Park, K. T., Lee, D., & Noh, S. D. (2020) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00227-1 · Cited by 68
Management of Collaborative BIM Data by Federating Distributed BIM Models
Beach, T., Petri, I., Rezgui, Y., & Rana, O. (2017) · Journal of Computing in Civil Engineering · doi:10.1061/(asce)cp.1943-5487.0000657 · Cited by 67
A Conceptual Architecture and Model for Smart Manufacturing Relying on Service-Based Digital Twins
Catarci, T., Firmani, D., Leotta, F., Mandreoli, F., Mecella, M., & Sapio, F. (2019) · IEEE International Conference on Web Services (ICWS) · doi:10.1109/icws.2019.00047 · Cited by 63
Product Lifecycle Management: Driving the Next Generation of Lean Thinking by Michael Grieves
Githens, G. (2007) · Journal of Product Innovation Management · doi:10.1111/j.1540-5885.2007.00250_2.x · Cited by 58
Urban Intelligence: a Modular, Fully Integrated, and Evolving Model for Cities Digital Twinning
Castelli, G., Tognola, G., Campana, E. F., Cesta, A., Diez, M., Padula, M., Ravazzani, P., Rinaldi, G., Savazzi, S., Spagnuolo, M., et al. (2019) · IEEE International Conference on Smart Communities: Improving Quality of Life using AI, Robotics and IoT (HONET) · doi:10.1109/honet.2019.8907962 · Cited by 56
Park, K. T., Yang, J., & Noh, S. D. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01586-x · Cited by 54
Supplier-contractor coordination approach to managing demand fluctuations of ready-mix concrete
Chen, Q., de Soto, B. G., & Adey, B. T. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103423 · Cited by 44
Computing in Civil Engineering 2019
Cho, Y. K., Leite, F., Behzadan, A., & Wang, C. (2019) · doi:10.1061/9780784482438 · Cited by 38
Management of structural monitoring data of bridges using BIM
Delgado, J. D., Butler, L., Gibbons, N., Brilakis, I., Elshafie, M. Z. E. B., & Middleton, C. (2016) · Apollo (University of Cambridge) · doi:10.17863/cam.6377 · Cited by 37
A digital factory platform for the design of roll shop plants
Walter Terkaj, A., Gaboardi, P., Trevisan, C., et al. (2019) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2019.04.007 · Cited by 37
Digital twin system design for dual-manipulator cooperation unit
Zhang, Z., Lu, J., Xia, L., Wang, S., Zhang, H., & Zhao, R. (2020) · IEEE Information Technology, Networking, Electronic and Automation Control Conference (ITNEC) · doi:10.1109/itnec48623.2020.9084652 · Cited by 36
Lu, Q., Parlikad, A. K., Woodall, P., Ranasinghe, G. D., Xie, X., Liang, Z., Konstantinou, E., Heaton, J., & Schooling, J. M. (2019) · Cambridge University Engineering Department Publications Database · doi:10.17863/cam.45198 · Cited by 34
Principle-based digital twins: a scoping review
Lamb, K. (2019) · Apollo (University of Cambridge) · doi:10.17863/cam.47094 · Cited by 32
Big Data Analytics System for Costing Power Transmission Projects
Delgado, J. M. D., Oyedele, L. O., Bilal, M., Ajayi, A., Akanbi, L., & Akinadé, O. O. (2019) · Journal of Construction Engineering and Management · doi:10.1061/(asce)co.1943-7862.0001745 · Cited by 30
Self-citationPreidel, C., Borrmann, A., Oberender, C., & Tretheway, M. (2016) · doi:10.1201/9781315386904-20 · Cited by 28
Multiscale modeling of backward erosion piping in flood protection system infrastructure
Fascetti, A., & Oskay, C. (2019) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12489 · Cited by 26
On Digital Twins, Mirrors and Virtualisations
Keith Worden, B., Cross, E. J., Gardner, P. A., Barthorpe, R. J., & Wagg, D. (2019) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-3-030-12075-7_34 · Cited by 24
Interoperability and machine-to-machine translation model with mappings to machine learning tasks
Nilsson, J., Sandin, F., & Delsing, J. (2019) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin41052.2019.8972085 · Cited by 21
Heterogeneous Communication Middleware for Digital Twin Based Cyber Manufacturing Systems
André, P., Azzi, F., & Cardin, O. (2019) · Studies in computational intelligence · doi:10.1007/978-3-030-27477-1_11 · Cited by 21
A Survey of Digital Twin Technology for PHM
Xiaodong, W., Feng, L., Junhua, R., & Liang, R. (2019) · Advances in intelligent systems and computing · doi:10.1007/978-981-13-9406-5_48 · Cited by 16
BIM in the Operation of Buildings
Aengenvoort, K., & Krämer, M. (2018) · Springer eBooks · doi:10.1007/978-3-319-92862-3_29 · Cited by 10
Cited by
Abioye, S. O., Oyedele, L. O., Akanbi, L., Ajayi, A., Davila Delgado, J. M., Bilal, M., Akinade, O. O., & Ahmed, A. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103299 · Cited by 1,015
Self-citationHimeur, Y., Elnour, M., Fadli, F., Meskin, N., Petri, I., Rezgui, Y., Bensaali, F., & Amira, A. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-022-10286-2 · Cited by 541
Design, Modeling and Implementation of Digital Twins
Segovia, M., & Garcia-Alfaro, J. (2022) · Sensors · doi:10.3390/s22145396 · Cited by 332
Mazzetto, S. (2024) · Sustainability · doi:10.3390/su16198337 · Cited by 262
Saka, A. B., Oyedele, L. O., Akanbi, L. A., Ganiyu, S. A., Chan, D. W. M., & Bello, S. A. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101869 · Cited by 161
Self-citation
Metadata
- Authors
- Davila Delgado, J. M., & Oyedele, L.
- Venue
- Advanced Engineering Informatics
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 49
- Pages
- 101332
- ISSN
- 1474-0346 (ISSN-L)
- OpenAlex
- W3173458433
- Cited by
- 257
- References
- 96
- FWCI
- 19.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.