Design scenarios of outdoor arrayed cylindrical photobioreactors for microalgae cultivation considering solar radiation and temperature
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Advancing microalgae biotechnologies requires the design of high efficiency, large scale outdoor photobioreactor systems. Here we present a predictive biomass productivity model to define system design parameters yielding high biomass productivities for a facility encompassing arrays of cylindrical photobioreactors (PBRs) in a sub-tropical location (Brisbane, Australia). The model analyses the temperature and the light distributed through the culture medium as a function of PBR height, diameter, spacing distance between reactors, biomass concentration and cultivation regime (continuous vs. batch; fixed vs. capped temperature control). Temporal changes in light and temperature were used to predict volumetric and areal productivities (Pvol and Pareal respectively) for three Chlorella strains (C. vulgaris, C. sp. 11_H5 and C. pyrenoidosa). A simple empirical relationship was derived to rapidly predict Pvol in PBR arrays based on the ratio of spacing distance and reactor height (L/H) if the Pvol of a single, unshaded PBR was known. For C. vulgaris under a continuous operation and variable temperature (within its maximum growth threshold), the highest Pvol in the range analysed was obtained at the smallest diameter (0.1 m), highest biomass concentration (1.5 g L−1) and largest L/H, (Pvol ~0.3 g L−1 d−1). In contrast, the highest Pareal (~50 t ha−1 yr−1) was found at higher diameters (0.15 and 0.3 m), a lower biomass concentration (0.3 g L−1) and low L/H (0.2–0.4); this was attributed to a higher overall culture volume per PBR and per area. Our predictions, based on light and temperature effects on productivity, suggest that attaining a high Pvol could reduce costs, energy and materials associated with water usage, harvest loads and PBRs; whereas attaining a Pareal toward its maxima could reduce costs associated with land. The model supports effective PBR array design and process optimisation to help minimise production cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chen, C.-Y., Yeh, K.-L., Aisyah, R., Lee, D.-J., & Chang, J.-S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.159 · Cited by 1,860
Photobioreactors: Production systems for phototrophic microorganisms
O., P. (2001) · Applied Microbiology and Biotechnology · doi:10.1007/s002530100702 · Cited by 987
Photobioreactors: Light regime, mass transfer, and scaleup
Molina Grima, E., Fernández, F. G. A., Garcı́a Camacho, F., & Chisti, Y. (1999) · Journal of Biotechnology · doi:10.1016/s0168-1656(99)00078-4 · Cited by 603
Design of Photobioreactors for Mass Cultivation of Photosynthetic Organisms
Huang, Q., Jiang, F., Wang, L., & Yang, C. (2017) · Engineering · doi:10.1016/j.eng.2017.03.020 · Cited by 487
Microalgal bioreactors: Challenges and opportunities
Xu, L., Weathers, P. J., Xiong, X., & Liu, C. (2009) · Engineering in Life Sciences · doi:10.1002/elsc.200800111 · Cited by 387
Validation of a simple model accounting for light and temperature effect on microalgal growth
Bernard, O., & Rémond, B. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.07.022 · Cited by 349
Future prospects of microalgal biofuel production systems
Stephens, E., Ross, I. L., Mussgnug, J. H., Wagner, L. D., Borowitzka, M. A., Posten, C., Kruse, O., & Hankamer, B. (2010) · Trends in Plant Science · doi:10.1016/j.tplants.2010.06.003 · Cited by 340
Self-citationMechanistic Modeling of Broth Temperature in Outdoor Photobioreactors
Béchet, Q., Shilton, A., Fringer, O. B., Muñoz, R., & Guieysse, B. (2010) · Environmental Science & Technology · doi:10.1021/es903214u · Cited by 129
Multifactorial comparison of photobioreactor geometries in parallel microalgae cultivations
Wolf, J., Stephens, E., Steinbusch, S., Yarnold, J., Ross, I. L., Steinweg, C., Doebbe, A., Krolovitsch, C., Müller, S., Jakob, G., et al. (2016) · Algal Research · doi:10.1016/j.algal.2016.02.018 · Cited by 64
Self-citation
Cited by
Siddiki, S. Y. A., Mofijur, M., Kumar, P. S., Ahmed, S. F., Inayat, A., Kusumo, F., Badruddin, I. A., Khan, T. M. Y., Nghiem, L. D., Ong, H. C., et al. (2022) · Fuel · doi:10.1016/j.fuel.2021.121782 · Cited by 454
Recent advances in downstream processing of microalgae lipid recovery for biofuel production
Khoo, K. S., Chew, K. W., Yew, G. Y., Leong, W. H., Chai, Y. H., Show, P. L., & Chen, W.-H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.122996 · Cited by 315
Xiaogang, H., Jalalah, M., Jingyuan, W., Zheng, Y., Li, X., & Salama, E.-S. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-01061-w · Cited by 87
Sarker, N. K., & Kaparaju, P. (2023) · Energies · doi:10.3390/en16073105 · Cited by 55
Eilertsen, H. C., Eriksen, G. K., Bergum, J.-S., Strømholt, J., Elvevoll, E., Eilertsen, K.-E., Heimstad, E. S., Giæver, I. H., Israelsen, L., Svenning, J. B., et al. (2022) · Applied Sciences · doi:10.3390/app12063082 · Cited by 35
Metadata
- Authors
- Huang, J., Hankamer, B., & Yarnold, J.
- Venue
- Algal Research
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 41
- Pages
- 101515
- ISSN
- 2211-9264 (ISSN-L)
- OpenAlex
- W2944732010
- Cited by
- 49
- References
- 9
- FWCI
- 1.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design scenarios of outdoor arrayed cylindrical photobioreactors for microalgae cultivation considering solar radiation and temperature. https://app.cochat.ai/papers/10.1016/j.algal.2019.101515
- The paper
- Huang, J., Hankamer, B., & Yarnold, J. (2019). Design scenarios of outdoor arrayed cylindrical photobioreactors for microalgae cultivation considering solar radiation and temperature. Algal Research. https://doi.org/10.1016/j.algal.2019.101515
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.