The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
One-step in-situ preparation of N-doped TiO2@C derived from Ti3C2 MXene for enhanced visible-light driven photodegradation
Abstract
As the most promising environment-friendly photocatalyst, titanium dioxide admittedly has two shortcomings of low sunlight utilization efficiency and poor quantum yield. Nitrogen doping and TiO2 loading on carbon materials can improve the above two problems, respectively. But a facile synthetic method for titanium dioxide composites with stable structure and high visible-light-driven photocatalytic activity is still desired by researchers. Herein we obtained two-dimensional layered nitrogen-doped carbon-supported titanium dioxides (N-TiO2@C) via a one-step in-situ fabrication way from a novel two-dimensional layered transition metal carbide Ti3C2 MXene as carbon skeleton and homologous titanium source. Based on the negatively charged and easily oxidized property of Ti3C2 MXene, it was assembled with nitrogen-containing cationic compound via electrostatic interactions and then in-situ transformed into nitrogen-doped carbon-supported TiO2 in a CO2 atmosphere at 550 °C. The obtained composites of porous 2D layered N-TiO2@C with high stability, outstanding electron transfer performance and excellent visible-light photocatalytic activity exhibits the high efficiency of phenol degradation with the apparent rate constant k of 1.646 × 10−2 min−1. It provides a facile new method for the preparation of visible-light-driven titanium dioxide with excellent catalytic performance, structural stability and good application prospects in the environmental purification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Self-citationRaman spectroscopy as a versatile tool for studying the properties of graphene
Ferrari, A. C., & Basko, D. M. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.46 · Cited by 7,405
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Recent advances in semiconductors for photocatalytic and photoelectrochemical water splitting
Hisatomi, T., Kubota, J., & Domen, K. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60378d · Cited by 4,580
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Kumar, S. G., & Devi, L. G. (2011) · The Journal of Physical Chemistry A · doi:10.1021/jp204364a · Cited by 1,968
Modified TiO2 For Environmental Photocatalytic Applications: A Review
Daghrir, R., Drogui, P., & Robert, D. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303468t · Cited by 1,494
Unique Lead Adsorption Behavior of Activated Hydroxyl Group in Two-Dimensional Titanium Carbide
Peng, Q., Guo, J., Zhang, Q., Xiang, J., Liu, B., Zhou, A., Liu, R., & Tian, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500506k · Cited by 1,322
Hydrothermal Synthesis of Graphene-TiO2 Nanotube Composites with Enhanced Photocatalytic Activity
Perera, S. D., Mariano, R. G., Vu, K., Nour, N., Seitz, O., Chabal, Y., & Balkus, K. J. (2012) · ACS Catalysis · doi:10.1021/cs200621c · Cited by 963
Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Li, Z., Wang, L., Sun, D., Zhang, Y., Liu, B., Hu, Q., & Zhou, A. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.10.009 · Cited by 928
TiO2/MXene Ti3C2 composite with excellent photocatalytic CO2 reduction activity
Low, J., Zhang, L., Tong, T., Shen, B., & Yu, J. (2018) · Journal of Catalysis · doi:10.1016/j.jcat.2018.03.009 · Cited by 878
Peng, C., Yang, X., Li, Y., Yu, H., Wang, H., & Peng, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11973 · Cited by 847
Dye adsorption and decomposition on two-dimensional titanium carbide in aqueous media
Mashtalir, O., Cook, K. M., Mochalin, V. N., Crowe, M., Barsoum, M. W., & Gogotsi, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02638a · Cited by 806
Tian, J., Zhao, Z., Kumar, A., Boughton, R. I., & Liu, H. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00180j · Cited by 804
Naguib, M., Mashtalir, O., Lukatskaya, M. R., Dyatkin, B., Zhang, C., Presser, V., Gogotsi, Y., & Barsoum, M. W. (2014) · Chem. Commun. · doi:10.1039/c4cc01646g · Cited by 800
Wu, X., Wang, Z., Yu, M., Xiu, L., & Qiu, J. (2017) · Advanced Materials · doi:10.1002/adma.201607017 · Cited by 800
Zhu, M., Huang, Y., Deng, Q., Zhou, J., Pei, Z., Xue, Q., Huang, Y., Wang, Z., Li, H., Huang, Q., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600969 · Cited by 731
Self-citationPreparation of highly visible-light active N-doped TiO2 photocatalyst
Yang, G., Jiang, Z., Shi, H., Xiao, T., & Yan, Z. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00376j · Cited by 689
Cai, T., Wang, L., Liu, Y., Zhang, S., Dong, W., Chen, H., Yi, X., Yuan, J., Xia, X., Liu, C., et al. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.08.053 · Cited by 638
Photocatalytic Properties of Graphdiyne and Graphene Modified TiO2: From Theory to Experiment
Yang, N., Liu, Y., Wen, H., Tang, Z., Zhao, H., Li, Y., & Wang, D. (2013) · ACS Nano · doi:10.1021/nn305288z · Cited by 468
Tu, W., Zhou, Y., Liu, Q., Yan, S., Bao, S., Wang, X., Xiao, M., & Zou, Z. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202349 · Cited by 408
MXene-derived TiO2@C/g-C3N4 heterojunctions for highly efficient nitrogen photofixation
Liu, Q., Ai, L., & Jiang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09350k · Cited by 399
Ghassemi, H., Harlow, W., Mashtalir, O., Beidaghi, M., Lukatskaya, M. R., Gogotsi, Y., & Taheri, M. L. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02583k · Cited by 378
Wang, H., Wu, Y., Xiao, T., Yuan, X., Zeng, G., Tu, W., Wu, S., Lee, H. Y., Tan, Y. Z., & Chew, J. W. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.04.012 · Cited by 377
Liu, X., Xing, Z., Zhang, Y., Li, Z., Wu, X., Tan, S., Yu, X., Zhu, Q., & Zhou, W. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.08.031 · Cited by 367
Wang, Y., Yu, J., Xiao, W., & Li, Q. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14908k · Cited by 330
Han, C., Wang, Y., Lei, Y., Wang, B., Wu, N., Shi, Q., & Li, Q. (2015) · Nano Research · doi:10.1007/s12274-014-0600-2 · Cited by 318
MXenes: Reusable materials for NH3 sensor or capturer by controlling the charge injection
Xiao, B., Li, Y.-C., Yu, X.-F., & Cheng, J.-B. (2016) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.05.062 · Cited by 292
Zhang, C., Beidaghi, M., Naguib, M., Lukatskaya, M. R., Zhao, M.-Q., Dyatkin, B., Cook, K. M., Kim, S. J., Eng, B., Xiao, X., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01244 · Cited by 265
Yuan, W., Cheng, L., An, Y., Lv, S., Wu, H., Fan, X., Zhang, Y., Guo, X., & Tang, J. (2018) · Advanced Science · doi:10.1002/advs.201700870 · Cited by 213
Yuan, W., Cheng, L., Zhang, Y., Wu, H., Lv, S., Chai, L., Guo, X., & Zheng, L. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700577 · Cited by 172
Cao, B. Q., Li, G., & Li, H. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.04.033 · Cited by 147
Self-citationLi, H., Hao, Y., Lu, H., Liang, L., Wang, Y., Qiu, J., Shi, X., Wang, Y., & Yao, J. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.03.071 · Cited by 136
Self-citationZhang, Y., Xiong, X., Han, Y., Yuan, H., Deng, S., Xiao, H., Shen, F., & Wu, X. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.017 · Cited by 50
Song, Y. H., Li, N., Chen, D., Xu, Q., Li, H., He, J., & Lu, J. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04395 · Cited by 44
Self-citationNovel Hierarchical TiO 2/ C Nanocomposite with Enhanced Photocatalytic Performance
Gao, Y., Chen, H., Zhou, A., Li, Z., Liu, F., Hu, Q., & Wang, L. (2015) · NANO · doi:10.1142/s1793292015500642 · Cited by 30
Sampaio, M. J., Marques, R. R. N., Tavares, P. B., Faria, J. L., Silva, A. M. T., & da Silva, C. G. (2013) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2013.08.014 · Cited by 26
Cited by
Gong, E., Ali, S., Hiragond, C. B., Kim, H. S., Powar, N. S., Kim, D., Kim, H., & In, S.-I. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02714j · Cited by 805
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
Cao, F., Zhang, Y., Wang, H., Khan, K., Tareen, A. K., Qian, W., Zhang, H., & Ågren, H. (2022) · Advanced Materials · doi:10.1002/adma.202107554 · Cited by 648
Kuang, P., Low, J., Cheng, B., Yu, J., & Fan, J. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.02.037 · Cited by 502
Two-dimensional MXene-based and MXene-derived photocatalysts: Recent developments and perspectives
Zhong, Q., Li, Y., & Zhang, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128099 · Cited by 466
Recent advances in photodegradation of antibiotic residues in water
Yang, X., Chen, Z., Zhao, W., Liu, C., Qian, X., Zhang, M., Wei, G., Khan, E., Hau Ng, Y., & Sik Ok, Y. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126806 · Cited by 446
Metadata
- Authors
- Huang, H., Song, Y., Li, N., Chen, D., Xu, Q., Li, H., He, J., & Lu, J.
- Venue
- Applied Catalysis B: Environmental
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 251
- Pages
- 154-161
- ISSN
- 0926-3373 (ISSN-L)
- OpenAlex
- W2924583382
- Cited by
- 386
- References
- 37
- FWCI
- 10.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.