CO2 adsorbent pellets produced from pine sawdust: Effect of coal tar pitch addition
Open accessThe DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
The main drawbacks of developing carbon adsorbents from pine sawdust, an abundant biomass feedstock, are the low carbon yield of the process and the poor mechanical properties of the resulting carbons. In an attempt to overcome these limitations, the effect of the addition of coal tar pitch was assessed. Adsorbent pellets were produced from pine sawdust and coal tar pitch by activation with CO2. The preparation process was optimized by using as decision variables the carbon yield and the adsorption performance of the adsorbents in conditions representative of post-combustion capture applications (10% CO2 at atmospheric pressure and at 50°C). Subjecting the composite pellets to a pre-oxidation treatment with air increased the carbon yield of the production process, and also improved the adsorption kinetics and capacity of the final adsorbents. The prepared adsorbents present a high carbon yield, a superior mechanical resistance and a competitive adsorption performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668 · cited 1×
“Narrow micropores are of the utmost importance for the adsorption of CO2 in postcombustion conditions (low partial pressures of CO2) [36-38].”
BackgroundReducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566 · cited 1×
“Adsorption separation processes seek to reduce the energy penalty of the capture step compared to the amine scrubbing alternative [16-18].”
BackgroundValorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313 · cited 1×
“2 Carbon adsorbents developed from different agricultural and food industry residues have shown potential as adsorbents for CO2 capture applications [3-13].”
BackgroundSelf-citationActivated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
Hao, W., Björkman, E., Lilliestråle, M., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.028 · Cited by 277 · cited 1×
“2 Carbon adsorbents developed from different agricultural and food industry residues have shown potential as adsorbents for CO2 capture applications [3-13].”
BackgroundSorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243 · cited 1×
“Moreover, for the adsorbents to be used in fixed-bed gas separation processes operating in VSA and TSA modes the sorbent particles must be first moulded into macroscopic shapes, since fine powder cannot be used directly due to pressure drop constraints [19].”
BackgroundDevelopment of adsorbents for CO2 capture from waste materials: a review
Olivares‐Marín, M., & Maroto‐Valer, M. M. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.45 · Cited by 142 · cited 1×
“2 Carbon adsorbents developed from different agricultural and food industry residues have shown potential as adsorbents for CO2 capture applications [3-13].”
BackgroundActivated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112 · cited 2×
“KOH activated paulownia sawdust [11] and H3PO4 activated eucaliptus wood [23] have recently been proposed for CO2 adsorption.”
BackgroundPlaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100 · cited 1×
“2 Carbon adsorbents developed from different agricultural and food industry residues have shown potential as adsorbents for CO2 capture applications [3-13].”
BackgroundSelf-citationInfluence of Water Vapor on CO2 Adsorption Using a Biomass-Based Carbon
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500342q · Cited by 41
Self-citation
Cited by
Jjagwe, J., Olupot, P. W., Menya, E., & Kalibbala, H. M. (2021) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2021.03.003 · Cited by 616
Carbon Capture, Utilization and Storage (CCUS)
Yan, J., & Zhang, Z. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.019 · Cited by 256
Durán, I., Álvarez-Gutiérrez, N., Rubiera, F., & Pevida, C. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.100 · Cited by 102
Self-citationPlaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b01720 · Cited by 62
Self-citationPlaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04856 · Cited by 61
Self-citation
Metadata
- Authors
- Plaza, M. G., Durán, I., Rubiera, F., & Pevida, C.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2015-04
- Volume
- 144
- Pages
- 182-192
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W1974121509
- Cited by
- 48
- References
- 10
- FWCI
- 5.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: CO2 adsorbent pellets produced from pine sawdust: Effect of coal tar pitch addition. https://app.cochat.ai/papers/10.1016/j.apenergy.2014.12.090
- The paper
- Plaza, M. G., Durán, I., Rubiera, F., & Pevida, C. (2015). CO2 adsorbent pellets produced from pine sawdust: Effect of coal tar pitch addition. Applied Energy. https://doi.org/10.1016/j.apenergy.2014.12.090
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.